• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.13 no.9
• /
• pp.1873-1882
• /
• 2009

In the ad-hoc mode of IEEE 802.11 standard, beacon is used for power control and network alarming between each node, and also it is for the synchronization in controlling network as PCF. However beacon is also used to inform the neighbor nodes of itself except for original purpose in the environment of IEEE 802.11s. For this, the existing beacon's transmission mechanism can't perform a function in full. In this paper, we suggest much faster neighbor discovery reducing network congestion caused by beacon through modification of beacon transmission mechanism. And we will show that suggesting algorithm more faster full neighbor discovery than traditional neighbor discovery using for IEEE 802.11 through simulation and test in real ad-hoc network.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.4A
• /
• pp.365-372
• /
• 2007

In IEEE 802.11b wireless network, stations synchronize themselves to the beacons periodically sent by the access point(AP) when they are running in low power mode. In case of missing beacon due to noise or traffic from neighboring wireless network stations must be awake until they get the next beacon, which causes energy consumption in stations. In this paper, we propose a scheme searching next beacon consuming little energy. The problems of missing beacon in low power mode of IEEE 802.11b wireless interface are described and a new method to reduce energy consumption is proposed. The proposed method is simulated with the network simulator, ns2, and compared with the low power mode of the IEEE 802.11b. The result measured in terms of station's wakeup time shows some enhancement in energy consumption when some errors occur in receiving frames.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.13 no.4
• /
• pp.759-764
• /
• 2009

A new backoff scheme for infrastructure mode in IEEE 802.11 wireless LANs is proposed to improve a performance. Each station generates a unique backoff number using total number of stations, fairness parameter included in beacon frame and an user's ID that is assigned by AP. The station sends a packet after its own backoff number of idle slots, which makes a collision free access among stations within AP's coverage. The proposed method shows better performance in the view of channel utilization and packet delay than an original IEEE 802.11 CSMA/CA backoff scheme.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.1A
• /
• pp.65-71
• /
• 2006

In IEEE 802.11b wireless network, the access point(AP) sends beacons periodically to manage stations when they are running in low power mode. Stations contend for the transmission medium after they receive a beacon and continuously check its state until it becomes available. Thus the energy consumption of each station increases as the load of wireless network. In this paper, we propose a method to reduce energy consumption controlling virtual bitmap in wireless network with multiple stations. The problems of low power mode in IEEE 802.11b wireless interface are described and a new method to reduce energy consumption is proposed. The proposed method is simulated with the network simulator, ns2, and compared with the low power mode of the IEEE 802.11b. The result measured in terms of station's wakeup time shows some enhancement in energy consumption when multiple stations are communicating through the AP in wireless network.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.12A
• /
• pp.1303-1310
• /
• 2007

In IEEE 802.11b wireless network, stations synchronize themselves to the beacons periodically sent by the access point (AP) when they are running in low power mode. Stations stay awake for enough time to receive beacon because it is delayed in AP if the wireless channel has been being used by other traffic at each scheduled instant. In this paper, we propose a method that measures the delay of received beacons and calculates wake-up interval of station to receive the next one. Beacon transmission delay at the AP is analyzed. The proposed method is simulated and its characteristics are described in the analysis. The result measured in terms of station's wake-up interval shows some enhancement in energy consumption.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.39C no.6
• /
• pp.482-489
• /
• 2014

This paper suggests the new network scanning algorithm that makes use of measurement pilot of IEEE 802.11k. The purpose of suggesting this algorithm is to improve the existing network scanning schemes. After introducing new algorithm, this paper shows the difference of time property and energy property between former scanning schemes and new scheme with simulation results. Passive scan has a merit of low-power consumption but it takes too long time to fulfill whole scanning. On the contrary, an advantage of active scan is speed but it consumes more battery power than passive scan. By using measurement pilot's smaller interval than beacon interval, the suggested algorithm can consume less power than active scan does, and also make shorter scanning delay than passive scan does.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.16 no.11
• /
• pp.3680-3693
• /
• 2022

The handover procedure of IEEE 802.11 wireless local area networks (WLANs) introduces significant delay, which can degrade the quality of service (QoS) especially for delay-sensitive applications. Although studies have been conducted to support handover in SDN-based WLAN, there is no research to reduce the channel scanning procedure that takes up the most delay time in the handover process. The channel scanning procedure is essential to determine the appropriate access point (AP). To mitigate this problem, this paper proposes a SWITCH: SDN-WLAN integrated handover scheme for QoS-Guaranteed mobile service. In SWITCH, each AP periodically broadcasts beacon frames through different channels in a predetermined order that includes the operating channel information of the AP. This allows mobile stations (MSs) to receive the beacon frames of nearby APs, and therefore they can determine the appropriate APs for handover without the channel scanning procedure. By reporting the information of the newly moved AP to the SDN controller, a flow rule is installed in advance to provide fast handover, and packet loss is reduced by buffering data destined for MS. In addition, the proposed scheme can adaptively operate SWITCH to consider the user location and QoS requirement of flow to save radio resource overhead. Performance evaluation results demonstrate that SWITCH can reduce the handover delays, flow table utilization ratio and radio resource overhead while improving the network throughput.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2014.11a
• /
• pp.199-202
• /
• 2014

본 논문은 IEEE 802.11 에서 QoS(Quality of Service)를 지원하는 환경에서 낮은 우선순위를 가지는 트래픽이 무선매체를 점유했을 때 TXOP 시간을 동적으로 적용하는 방법을 기술하였다. 본 논문에서는 IEEE 802.11e 환경에서 AP가 Beacon 메시지를 통하여 TXOP 시간을 통보함으로써 매체 접근 시도에 발생하는 충돌 감소와 낮은 우선순위 트래픽의 처리량을 증가하는 기법을 제안한다.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.11 no.12
• /
• pp.5835-5854
• /
• 2017

The implementation of IEEE 802.15.6 in Wireless Body Area Network (WBAN) is contention based. Meanwhile, IEEE 802.15.4 MAC provides limited 16 channels in the Superframe structure, making it unfit for N heterogeneous nature of patient's data. Also, the Beacon-enabled Carrier-Sense Multiple Access/Collision-Avoidance (CSMA/CA) scheduling access scheme in WBAN, allocates Contention-free Period (CAP) channels to emergency and non-emergency Biomedical Sensors (BMSs) using contention mechanism, increasing repetition in rounds. This reduces performance of the MAC protocol causing higher data collisions and delay, low data reliability, BMSs packet retransmissions and increased energy consumption. Moreover, it has no traffic differentiation method. This paper proposes a Low-delay Traffic-Aware Medium Access Control (LTA-MAC) protocol to provide sufficient channels with a higher bandwidth, and allocates them individually to non-emergency and emergency data. Also, a Contention Differentiated Adaptive Slot Allocation CSMA-CA (CDASA-CSMA/CA) for scheduling access scheme is proposed to reduce repetition in rounds, and assists in channels allocation to BMSs. Furthermore, an On-demand (OD) slot in the LTA-MAC to resolve the patient's data drops in the CSMA/CA scheme due to exceeding of threshold values in contentions is introduced. Simulation results demonstrate advantages of the proposed schemes over the IEEE 802.15.4 MAC and CSMA/CA scheme in terms of success rate, packet delivery delay, and energy consumption.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.3A
• /
• pp.209-216
• /
• 2005

This paper generally relates to the field of wireless local area networks(WLANs), and more particularly, to AP selection and association methods for the performance of a station. In these days, IEEE 802.11 Wireless LAN network is widely deployed and used as an emerging service to connect high-speed Internet in the public wireless environment. But, if there are many users in hot spot area, they suffer a severe decrease of performance. Thus it needs an association and access control mechanism especially when it is used in the public environment. In this paper, we suggest a selection and association method using Beacon or Probe Response frames based IEEE 802.11. Station selects AP using the information of the capacity area in a Beacon or a Probe Response frame. According to the present paper, an association method for a public WLAN service, which includes a WLAN user terminal and an AP for relaying WLAN communications to and from the user terminal, includes the steps of the user terminal asking the AP's states for access to a radio channel; and the station selects and associates with the AP According to the above-described selection in a high speed wireless Internet service based on public WLAN technologies that are currently in operations. Further, it is possible to improve the efficiency of network management.