• Aerospace Engineering and Technology
• /
• v.12 no.2
• /
• pp.118-122
• /
• 2013

In this study, We show that multiple UAVs (Unmaned Air Vehicle) have datalink system which includes the IEEE 802.11b technology. we are predicting and calculating to the number of the UAV and data rate between UAV and ground control system, using the IEEE 802.11 standards which include the transmit/receive the delay time and theoretical maximum throughput (TMT).

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37B no.11
• /
• pp.1014-1021
• /
• 2012

In this paper, we analyze practical factors to apply the network coding (NC) in the IEEE 802.11s wireless mesh networks. First, we introduce the procedure of the NC in the wireless network. And then we suggest important factors that can cause lower NC gain than theoretical gain. Simulation results show that the NC in wireless networks can reduce the network load but it can cause increased power consumption of wireless nodes. Furthermore, the NC gain can be considerably reduced under the inappropriate network conditions.

• KSCI Review
• /
• v.15 no.1
• /
• pp.225-228
• /
• 2007

컴퓨터 영상 화면을 아날로그 음성영상신호로 변환한 후 무선으로 송신하여 처리하기 때문에 해상도가 낮아 화질이 떨어진다. 또한 대형프로젝션TV에 보낼 영상화면의 단말기 RGB포트에 게이트웨이를 직접 연결해야 하는 불편이 따른다. 이러한 문제를 해결하기 위하여 이 논문에서는 IEEE802.11b/g 무선네트워크 기반에서 대용량 영상데이터를 최대 54Mbps의 속도로 송수신할 수 있는 무선통신시스템 개발과 이를 게이트웨이에 적용하여 영상데이터까지 무선으로 처리할 수 있도록 하는 장치를 개발하고, 대용량 영상데이터 송수신 처리 소프트웨어를 개발한다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.7B
• /
• pp.642-651
• /
• 2006

In ad-hoc network, the most of existing packet scheduling schemes provides throughput-based fairness. To provide throughput-based fairness, it basically supposes that the channel capacity is fixed. But, the supposing that the channel capacity is fixed is not appropriate because IEEE 802.11b and 802.11g which are normally used for organizing ad-hoc network can provide various data rate according to channel conditions. So, we define time-based fairness for each flow to consider multi-rate and suggest the MRADPS reaching the defined time-based fairness. Simulation result shows that MRADPS improves the total network throughput in ad-hoc network with providing time-based fairness to each flow.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38B no.12
• /
• pp.984-986
• /
• 2013

DCF(Distributed Coordination Function) defined in IEEE 802.11 provides two different modes, namely, a 2-way handshake and a 4-way handshake according to the transmission procedure. If secondary transmission would not cause a collision with primary transmission, there is no need to postpone transmission unnecessarily. We study a feasible condition which can transmit data concurrently and propose a concurrent transmission scheme.

• Journal of the Korea Society of Computer and Information
• /
• v.19 no.1
• /
• pp.31-41
• /
• 2014

This paper proposes a virtual mobile ad-hoc network (VMANET) model that automatically divides heterogeneous mobile devices of a MANET into a number of network groups depending on the communication capacity(data rate) of different network operational models such as IEEE 802.11g, IEEE 802.11b, and Frequency Hopping. In addition, it supports a distinct routing protocol for each network group of VMANETs, resulting in running multiple routing protocols concurrently on different groups of VMANETs. To reduce the network congestion and improve the network load balance, a default MANET gateway is configured in each VMANET and these gateways are responsible for integrating the MANET and IP networks. Experiment results show that the proposed model outperforms the conventional IMANET by significantly increasing throughput and reducing network congestion and network delay.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.9B
• /
• pp.1390-1398
• /
• 2010

We present the concept of applying Wireless Mesh Networking (WMN) technology into Smart Grid, which is recently rising as a potential technology in various areas thanks to its advantages such as low installation costs, high scalability, and high flexibility. Smart Grid is an intelligent, next-generation electrical power network that can maximize energy efficiency by monitoring utility information in real-time and controlling the flow of electricity with IT communications technology converged to the existing power grid. WMNs must be designed for Smart Grid communication systems considering not only the high level of reliability, QoS support and mass-data treatment but also the properties of the traditional power grid. In addition, it is essential to design techniques based on international standards to support interoperability and scalability. In this paper, we evaluate the performance of IEEE 802.11s based Smart Grid Mesh Networks by conducting preliminary simulation studies with the ns-3 simulator. We also outline some challenging issues that should be reviewed when considering WMNs as the candidate for Smart Grid communication infrastructure.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.11B
• /
• pp.1685-1695
• /
• 2010

In this paper, we propose a new reliable multicast MAC protocol over the IEEE 802.11-based tactical ad hoc networks. The major contribution compared to the previous reliable multicast schemes using consecutive CTSs/ACKs is that the proposed scheme can send multiple CTS/ACK messages concurrently assisted by MC-DS/CDMA mechanisms. When multiple receivers receive the RTS/DATA message from a sender, they respond with the CTS/ACK message spread with pre-assigned code in the same time interval. The proposed scheme can reduce the overhead of multiple CTSs/ACKs. It is also possible to alleviate the received signal strength at the enemy detector and thus it improves low probability of detection performance. Through simulations and analysis, the proposed scheme outperforms that of the multiple CTSs/ACks in terms of the throughput, transmission delay and low probability of detection.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.9A
• /
• pp.892-899
• /
• 2006

In this paper, we propose an automatic switching technology between the ad-hoc and the infrastructure modes without user intervention in the IEEE 802.11b wireless LAN. Also, we design our proposed technology and implemented on the Linux machine. For this operation, the area within an Access Point (AP) coverage is defined as a switching area, and a node without any transmission in this area is assumed to be able to relay frames between the AP and nodes in the shaded area that is outside the coverage and cannot reach the AP. By using the proposed technology, it is possible to provide the seamless Internet access service to nodes at the ad-hoc mode in the shaded area. In this paper, we explains the operation of the detection method of the switching area, presents the flowchart and implementation environment. To prove the operation of our technology, we obtain the results of captured packets transmitted between nodes and throughput results through ftp transmission experiment. Hence, we can see that our proposed scheme can be improve the wireless access service in wireless and mobile networks.

• Journal of Digital Convergence
• /
• v.10 no.3
• /
• pp.265-271
• /
• 2012

This paper proposes a communication distance performance evaluation method for mobility of service robots equipped with a Wi-Fi module. Service robots have function of mobile communication system according to classified services and utilize a (preferred) communication method, wireless lan(IEEE802.11 a/b/gin) communication method of ISM band(2.4GHz and 5.8GHz). For evaluating degradation performance of wireless data for the service robot's mobility. We measured and presented reference vectors obtained by utilizing a distance attenuation correlation method in the real world environment. To evaluate performance of the proposed method, path loss of reference vectors was assigned to the Azimuth 301W and then transmission rate and the transmit throughput of the test sample were measured by the Chariot. The proposed measurement method is necessary for securing wireless LAN communication distance for mobility of mobile smart device and service robots. In addition, if the proposed measurement method os adopted, It would be expected that mobile smart device vendors would utilize the method as an effective wireless LAN mobility communication distance performance evaluation method.