• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.47 no.5
• /
• pp.31-40
• /
• 2010

This paper describes a LDPC decoder for IEEE 802.11n wireless LAN standard. The designed processor supports parity check matrix for block length of 1,944 and code rate of 1/2 in IEEE 802.11n standard. To reduce hardware complexity, the min-sum algorithm and layered decoding architecture are adopted. A novel memory reduction technique suitable for min-sum algorithm was devised, and our design reduces memory size to 25% of conventional method. The LDPC decoder processor synthesized with a $0.35-{\mu}m$ CMOS cell library has 200,400 gates and memory of 19,400 bits, and the estimated throughput is about 135 Mbps at 80 MHz@2.5v. The designed processor is verified by FPGA implementation and BER evaluation to validate the usefulness as a LDPC decoder.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.46 no.5
• /
• pp.56-63
• /
• 2009

The IEEE 802.11 standard has been used for wireless data networks such as wireless LAN, ad-hoc network, and vehicular ad-hoc network. Thus, the performance analysis of the IEEE 802.11 specification has been one of the hottest issues for network optimization and resource management. Most of the analysis studies were performed in a data plane of the IEEE 802.11 unicast. However, IEEE 802.11 broadcast is widely used for topology management, path management, and data dissemination. Thus, it is important to understand the performance of the broadcast scheme for the design of efficient wireless data network. In this contort, we analyze the IEEE 802.11 broadcast scheme in terms of the broadcast frame reception probability according to the distance from a sending node. Unlike the other works, our analysis framework includes not only the system parameters of the IEEE 802.11 specification such as transmission range, data rate, minimum contention window but also the networking environments such as the number of nodes, network load, and the radio propagation environments. Therefore, our analysis framework is expected to be used for the development of protocols and algorithms in a dynamic wireless data network.

• Journal of KIISE:Information Networking
• /
• v.36 no.5
• /
• pp.456-469
• /
• 2009

We develop a new wireless link quality metric, ECOT(Estimated Channel Occupancy Time) that enables a high throughput route setup in wireless mesh networks. The key feature of ECOT is to be applicable to diverse mesh network environments where IEEE 802.11 MAC (Medium Access Control) variants are used. We take into account the exact operational features of 802.11 MAC protocols, such as 802.11 DCF(Distributed Coordination Function), 802.11e EDCA(Enhanced Distributed Channel Access) with BACK (Block Acknowledgement), and 802.11n A-MPDU(Aggregate MAC Protocol Data Unit), and derive the integrated link metric based on which a high throughput end-to-end path is established. Through extensive simulation in random-topology settings, we evaluate the performance of proposed link metric and present that ECOT shows 8.5 to 354.4% throughput gain over existing link metrics.

• The Journal of the Korea Contents Association
• /
• v.9 no.12
• /
• pp.515-527
• /
• 2009

IEEE 802.11n is an ongoing next-generation WLAN(Wireless Local Area Network) standard that supports a very high-speed connection with more than 100Mb/s data throughput measured at the MAC(Medium Access Control) layer. Study trends of IEEE 802.11n show two aspects, enhanced data throughput using aggregation among packets in MAC layer, and better data rates adapting MIMO(Multiple-Input Multiple-Output) in PHY(Physical) layer. But, the former doesn't consider wireless channel and the latter doesn't consider aggregation among packets for reality. Therefore, this paper analyzes data throughput for IEEE 802.11n considering MAC and PHY connection. A-MPDU(Aggregation-MAC Protocol Data Unit) and A-MSDU(Aggregation-MAC Service Unit) is adapted considering multi-service in MAC layer, WLAN MIMO TGn channel using SVD(Singular Value Decomposition) is adapted considering MIMO and wireless channel in PHY layer. Consequently, Simulation results shows throughput between A-MPDU and A-MSDU. Also, We use Ns-2(Network simulator-2) for reality.

• Proceedings of the IEEK Conference
• /
• 2003.07a
• /
• pp.517-520
• /
• 2003

Orthogonal Frequency Division Multiplexing (OFDM) is a promising technology for high speed multimedia communication in a frequency selective multipath channel. In this paper, Software IPs for the synchronizer of IEEE 802.11a Wireless LAN system are designed and optimized for TI's TMS320C6201 fixed point DSP. As a result of the execution cycles of the target DSP for each functions of the system, an efficient HW/SW partitioning method can be considered.

• Proceedings of the Korea Institutes of Information Security and Cryptology Conference
• /
• 2003.07a
• /
• pp.249-253
• /
• 2003

기존의 무선 랜의 보안상의 문제점들을 해결하기 위하여 사용자와 인증자사이의 상호인증과 키를 교환하는 메커니즘이 요구된다. 이것을 보안하기 위해 IEEE 802.11i에서 키 체계와 4-Way Handshake를 제안하였다. 본 논문에서 언급되는 키 생성 및 교환 메커니즘은 사용자와 서버간의 인증된 마스터키를 통한 사용자와 인증자의 상호인증과, 키 생성과 키 교환하는 방법에 초점을 맞추고 있다. 이러한 키를 생성하기 위한 Pairwise 키 체계와 키 교환을 위한 4-Way Handshake, 4-Way Handshake에서 사용되는 EAPOL-Key message에 대하여 분석하였다.

• Journal of Korea Multimedia Society
• /
• v.12 no.11
• /
• pp.1521-1529
• /
• 2009

There is a serious unfairness problem between upstream and downstream flows of AP in IEEE 802.11 Wireless LAN. This problem is because Wireless LAN's DCF MAC protocol provides AP with equal channel access priority to mobile noded. Also, it makes this problem worse that the TCP's Data segment loss is more effective on throughput than the TCP's ACK segment. In this paper, we first make several simulations to analysis the unfairness in the various point of view and to find reasons of the unfairness. Also, this paper presents AP's scheduling scheme to alleviate the unfairness problem and evaluate the scheme through ns2 simulator.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.8 no.2
• /
• pp.232-238
• /
• 2004

In this paper, radio propagation in a subway tunnel is investigated using fan beam antennas, circular polarization antennas and directional antennas at 2.4㎓ and 5.8㎓ band, respectively. The results of narrowband channel measurements show that received power level for NLOS(Non-Line-Of-Sight) path is decreased drastically as compared with LOS(Line-Of-Sight) path. Wideband channel measurements are obtained using a PN sliding correlation method. The parameters of the channel such as mean access delay and RMS delay spread are compared as to different types of directional beam at IEEE 802.11 WLAN(Wireless Local Area Network) band including 2.4㎓ and 5.8㎓ bands, respectively.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 2007.11a
• /
• pp.330-340
• /
• 2007

IEEE 802.11 wireless LANs employ the backoff algorithm to avoid contentions among STAs when two or more STAs attempt to transmit their data frames simultaneously. The MAC efficiency can be improved if the CW values are adaptively changed according to the channel state of IEEE 802.11 wireless LANs. In this paper, we propose a dynamic contention window control algorithm using the genetic algorithm to improve the MAC throughput of IEEE 802.11 wireless LANs.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.22 no.8
• /
• pp.797-804
• /
• 2011

Network coding has recently emerged as an effective solution for multicast and broadcast communications in wireless ad hoc networks. In this paper, we propose a throughput performance model for IEEE 802.11 wireless networks with network coding. Specifically, we consider IEEE 802.11 DCF protocol and linear topology in which traffic sources are located at both ends and intermediate nodes act as relays performing network coding. The proposed analytic model has the form of nonlinear equations in terms of throughput of each node. The solution of the nonliear equations thus correspond to the end-to-end throughput. Extensive simulation experiments have been performed to validate accuracy of the proposed model. Numerical results show that the results of the proposed analytic model agree fairly well with the corresponding simulation results.