• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 한국해양정보통신학회 2007년도 추계종합학술대회
• /
• pp.482-485
• /
• 2007

Recent generation of wireless computing has focus on the integrating of exisitng technologies to enhance the mobile capabilities and developing a new approaches to meet the needs of the growing pool of applications. This paper describes an integrated IEEE802.15.4 wireless CDMA based healthcare system that interacts and received the data wirelessly from wireless medical devices of patient and forward to medical center by using the cellular network. Mobile application had been developed not only as the middle ware to handle the receive and transmit of medical data between wireless sensor network and cellular network but also provides the interface for monitoring and analyzing the health condition of patients continuously at cellular phone regardless of its physical location. This system thus enables the remote healthcare monitoring and supports medical data seamlessly roams between IEEE802.15.4 wireless network and CDMA network beyond and outside the hospital environment.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• 제15권3호
• /
• pp.1711-1717
• /
• 2014

There have been many studies on IEEE 802.15.4 for home area networks(HAN) in Smart Grids. Existing unslotted or slotted IEEE 802.15.4 has almost not met strict conditions of the U.S. Department Of Energy(DOE). This study proposed a improved algorithm that reduces collisions, delay time and changes in the delay time. For this purpose, numbers were given to nodes to make the transmission in the order of the node numbers. Since the probability of the occurrence of collisions would decrease compared to random transmission if the nodes were given numbers, Backoff time was set at 0. In the proposed Numbered-Unslotted-ZeroBackoff algorithm, when the packet size was 133 octets and less than 180 packets per second occurred, it was found that packet delivery ratio was over 99.99%, and that all the maximum delay, the mean delay and the minimum delay were less than 0.02 seconds. This paper could confirm that the algorithm proposed in this study met the strict conditions of the DOE.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• 제36권1B호
• /
• pp.21-28
• /
• 2011

The femtocell is a miniaturized Base Station (BS) with low-cost and low-power using general broadband access network as backhaul. It is expected not only to improve indoor coverage but also to reduce a service charge. However, in IEEE 802,16e femtocells, when the Mobile Station (MS) scans neighbor BSs for handover, it takes a long time due to too many number of femto BSs. Also the size of the neighbor advertisement message that will be periodically sent by a serving BS is increased as the number of target femto BSs for scanning increases. In this paper, we proposed an efficient femtocell scanning scheme, using a triangulation mechanism and a femto BS monitoring scheme to reduce the number of scanning operations and the size of the neighbor advertisement messages. The proposed scheme can avoid wasting air resources and reduce scanning overheads by minimal scanning operation. The simulation results showed that the proposed scheme could improve scanning performance and avoid wasting air resources, compared with the conventional scheme of the IEEE 802.16e system.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• 제36권8A호
• /
• pp.702-711
• /
• 2011

This paper proposes a HAG(Hidden-Node-Aware Grouping) algorithm for IEEE 802.15.4 networks to enhance the performance by eliminating collisions resulted from the hidden node problem without adopting the RTS/CTS packet exchanges. To solve the hidden node problem, the HAG algorithm organizes nodes into disjoint transmission groups by dynamically allocating hidden nodes into separate groups which take turns in a round robin way for their transmission. For dynamic group adjustment, it periodically evaluates the presence of hidden nodes based on subordinate nodes' receipt reports. To accurately measure its behavior, this paper also builds an analytical model to estimate its throughput fluctuation over various network topologies. The mathematical model along with simulation results confirmed that the HAG technique gracefully degraded the throughput of IEEE 802.15.4 networks whereas the standard IEEE 802.15.4 networks suffer severe throughput fallout as hidden nodes become populated.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• 제35권12A호
• /
• pp.1152-1159
• /
• 2010

Wireless Mesh Networks (WMNs) provides Internet accesses to users by forming backbone networks via wireless links. A key problem of WMN is network capacity. For this, multi-channel and multi-rate functions of IEEE 802.11 can be utilized. Depending on channel assignments, multi-channel determines node connectivity and channel diversity. Also, in IEEE 802.11 multi-rate networks, the rate anomaly problem occurs, the phenomenon that low-rate links degrades the performance of high-rate links. In this paper, we propose rate separating multi-channel (RSMC) protocols that improves the node connectivity and channel diversity, and mitigates the rate anomaly problem. RSMC increases the channel diversity by forming tree-based WMNs and decreases the rate anomaly by separating different rate links on the tree via channels. In addition, it uses network connectivity (NC) algorithm to increase the node connectivity. Through simulations, we demonstrate that the RSMC shows improved performance than existing multi-channel protocols in terms of aggregate throughput, node connectivity, channel diversity.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• 제32권4A호
• /
• pp.365-372
• /
• 2007

In IEEE 802.11b wireless network, stations synchronize themselves to the beacons periodically sent by the access point(AP) when they are running in low power mode. In case of missing beacon due to noise or traffic from neighboring wireless network stations must be awake until they get the next beacon, which causes energy consumption in stations. In this paper, we propose a scheme searching next beacon consuming little energy. The problems of missing beacon in low power mode of IEEE 802.11b wireless interface are described and a new method to reduce energy consumption is proposed. The proposed method is simulated with the network simulator, ns2, and compared with the low power mode of the IEEE 802.11b. The result measured in terms of station's wakeup time shows some enhancement in energy consumption when some errors occur in receiving frames.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• 제33권6A호
• /
• pp.624-634
• /
• 2008

The mobile station which is about to do handover in IEEE 802.16e networks scans its neighboring base station channels to decide its next target base station. However, due to the lack of location information of its subscribers, the serving base station cannot provide any reliable candidate channel which is actually attachable by the scanning mobile stations, which makes the mobile station suffer from the long scanning time. Sometimes, long scanning time may cause the degradation of quality of service due to repeatable scan-duration or failure to start the handover procedure in time. To overcome these problems, in this paper, we propose a new protocol so called fast group scanning scheme, in which multiple mobile stations form a group to scan their neighboring base station channels simultaneously. Main contribution of this proposal is to find and decide a reliable target base station within a short scanning time. The fast group scanning scheme can be deployed to the cell network of the serving base station with a dynamic neighboring base station list management.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• 제38B권4호
• /
• pp.247-256
• /
• 2013

According to the complete standard document for PHY/MAC layer of visible light communication through the IEEE 802.15.7 WG on Sept. 2011, visible light communication lays a good foundation for developing a variety of application services. Thus, visible light communication moves to the advanced research period for developing application services, but most of applications are limited only to PtP service model. However, PtMP communication environment for VLC is required to accommodate more various applications. In this paper, we analyze an effect of key parameters on network performance in the star topology based visible personal area network system. We implement a simulator with considering attributes of PHY and MAC layer which are defined by IEEE 802.15.7 standard documents, and analyze the VLC performance.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• 제14권4호
• /
• pp.1877-1882
• /
• 2013

Smart Utility Network (SUN) is not only a core technology of intelligent green home networks but also a future technology which can be applicable to various areas instead of ZigBee. SUN should be compliment with IEEE 802.15.4g standard and can provide high link margin and stable communication data-rate for poor communication surrounding. This paper describes how to design the system simulation environment for the SUN RF transceiver, and also reports the required block-level specification for each circuit and various implementation impairments. Finally, the measured performances of the fabricated RF transceiver, which has utilized the system simulation results, completely satisfies the IEEE 802.15.4g SUN PHY standard.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• 제32권12A호
• /
• pp.1226-1237
• /
• 2007

This paper proposes QoS mesh routing protocol for IEEE 802.16 based wireless mesh networks. QoS mesh routing protocol proposed in this paper is a proactive hop-by-hop QoS routing protocol. The goal of our routing protocol is not only to find a route from a source to a destination, but also optimal route that satisfies QoS requirements, given in terms of bandwidth and delay as default QoS parameters. In this paper, we first analyze possible types of routing protocols that have been studied for MANET and show proactive hop-by-hop routing protocols are the most appropriate for wireless mesh networks. Then, we present a network model for IEEE 802.16 based wireless mesh networks and propose a proactive hop-by-hop QoS routing protocol. Through our simulation, we represent that our routing protocol outperforms QOLSR protocol in terms of end-to-end delay, packet delivery ratio and routing overhead.