• Journal of IKEEE
• /
• v.24 no.1
• /
• pp.178-185
• /
• 2020

This paper proposes precise time synchronization-based synchronized sampling structure applied HW/SW platform for LAN-based protection of future digital substations. The integrated software of the proposed platform includes IEC 61850 protocol, IEEE 1588 precision time protocol and synchronized sampling structure. The proposed platform expected to provide a basis of an application of future distributed sensing data-based protection and control methods by providing synchronized measurement among IEDs. The implementation of the proposed HW/SW platform technique was performed using TMDXIDK572 multi-core/multi-processor evaluation module and its time synchronization performance and synchronized sampling function were confirmed through the performance tests.

• Proceedings of the KIEE Conference
• /
• 2015.07a
• /
• pp.221-222
• /
• 2015

디지털 변전소를 위해 IEC61850 국제 표준 프로토콜을 적용한 보호계전기(IED), 게이트웨이, HMI등이 필드에서 사용되고 있고, 전체 디지털 변전소를 위한 병합장치(Merging Unit: MU)등도 실제 운영되고 있다. 디지털 변전소는 기존 변전소를 효과적으로 운영하기 위해 필요한 높은 수준의 가용성과 전송능력이 필요하다. IEC TC 57 WG10은 디지털 변전소를 위한 이중화 사양으로 IEC SG65C WG15의 IEC62439-3/4 고속 절체 네트워크 운영 프로토콜(Highly Available Seamless Redundancy: HSR),(Parallel Redundancy Protocol: PRP)들을 추천하고 있다. 본 논문에서는 프로세스 버스의 병합장치(MU)로부터 계측된 전류와 전압을 고속 이더넷을 통해 샘플 계측값(Sampled Measured Values: SMV)을 전송받고, 고정밀 IEEE1588v2 PTP(Precision Time Protocol) 시각동기를 하며, 스테이션 레벨에서 MMS와 GOOSE 통신을 하는 계전기와 성능에 대한 것이다.

• Proceedings of the KIPE Conference
• /
• 2006.06a
• /
• pp.316-318
• /
• 2006

현재 변전소 자동화의 국제표준으로 대두되고 있는 IEC61850은 스테이션 버스뿐만 아니라 프로세서 버스까지도 표준화된 통신 기술을 채용하였고, 자동화에 필요한 모델을 제시하고 있다. 본 연구에서는 IEC61850 프로세서 레벨에서 정밀한 시간동기화를 구현하기 위해 필요한 동기화 기술을 고찰하였다. 이와 더불어 전통적인 시간동기화 프로토콜인 NTP 및 최근 새롭게 개발된 시간동기화 프로토콜인 IEEE1588 프로토콜을 분석하고 실제로 이더넷 기반의 IEC61850 프로세서 레벨에서의 시간 동기화를 수행하였다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.40 no.8
• /
• pp.1588-1596
• /
• 2015

In the Internet of Things (IoT), resource-constrained devices such as sensors are capable of communicating and exchanging data over the Internet. The IETF standard group has specified an application protocol CoAP, which uses UDP as a transport protocol, allows such a lightweight device to transmit data. Also, the IETF recommended the DTLS binding for securing CoAP. However, additional features should be added to the DTLS protocol to resolve several problems such as packet loss, reordering, fragmentation and replay attack. Consequently, performance of DTLS is worse than TLS. It is highly required for lightweight devices powered by small battery to design and implement a security protocol in an energy efficient manner. This paper thus discusses about DTLS performance in the perspective of energy consumption. To analyze the performance, we implemented IEEE 802.15.4 based test network consisting of constrained sensor devices in the Cooja simulator. We measured energy consumptions required for each of DTLS client and server in the test network. This paper compares the energy consumption and amount of transmitted data of each flight of DTLS handshake, and the processing and receiving time. We present the analyzed results with regard to code size, cipher primitive and fragmentation as well.

• Journal of IKEEE
• /
• v.23 no.3
• /
• pp.1096-1099
• /
• 2019

In this paper, we propose the protocol for construction of smart factory. The proposed protocol for construction of smart factory consists of an OPC UA Server/Client, a technology of TSN realtime communication, a NTP & PTP time synchronization protocol, a FieldBus protocol and conversion module, a technology of saving data for data transmit latency and synchronization protocol. OPC UA server/client is a system integration protocol which makes interface industrial hardware device and supports standardization which allows in all around area and also in not independent from any platform. A technology of TSN realtime communication provides an high sensitive time management and control technology in a way of sharing specific time between devices in the field of high speed network. NTP & PTP time synchronization protocol supports IEEE1588 standardization. A fieldbus protocol and conversion module provide an extendable connectivity by converting industrial protocol to OPC. A technology of saving data for data transmit latency and synchronization protocol provide a resolution function for a loss and latency of data. Results from testing agencies to assess the performance of proposed protocol for construction of smart factory, response time was 0.1367ms, synchronization time was 0.404ms, quantity of concurrent access was 100ea, quantity of interacting protocol was 5ea, data saving and synchronization was 1,000 nodes. It produced the same result as the world's highest level.

• Current Industrial and Technological Trends in Aerospace
• /
• v.6 no.1
• /
• pp.116-123
• /
• 2008

In the launch mission, mission control systems and tracking systems need time synchronization for data monitoring and data analysis. There are several standards for time synchronization and an adequate standard is selected according to the requirement of time accuracy and cost among time synchronization standards. Oscillators are used to maintain time accuracy. There are some kinds of oscillators with diverse characteristics and an adequate oscillator can be adopted according to time accuracy. In this paper, we will specify characteristics of several oscillators and standards generally used for time synchronization. And we will also introduce TSDN(time synchronization and display network) for time synchronization in Naro Space Center.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.5A
• /
• pp.561-570
• /
• 2008

Time synchronization is essential for a number of network applications such as high speed communication and parallel/distribution processing systems. As the era of ubiquitous computing is ushered in, the high precise time synchronization in wireless networks have been required in. This paper presents the design ana the implementation of the high precision time synchronization in wireless networks using ZigBee. To achieve high precision requirements, we have tried to analyze and reduce error factors such as the latency and jitters of a protocol stack on wireless environments. In addition, this paper includes some experiments and performance evaluations of our system. The result is that we established for nodes in a network to maintain their elects to within a 50 nanosecond offset from the reference clock.

• Journal of Institute of Control, Robotics and Systems
• /
• v.20 no.6
• /
• pp.669-675
• /
• 2014

In this paper, we described the investigated theoretical time synchronization performances and experiment results obtained by commercially provided PTP (Precise Time Protocol) modules when the time of a slave clock is synchronized to the master clock. In the case of the theoretical performance analysis, we investigated 3 types of clock levels such as Crystal Oscillator (XO), TCXO (Temperature Compensated XO) and OCXO (Oven Controlled XO). From the analysis, it was observed that the synchronization performance is greatly influenced by the synchronization period and the required performance under 1 us can be achieved by using XO level clocks when the synchronization period is less than 2 seconds and the uncertainty of the propagation delay is under 100 ns. For the experiments using commercial PTP modules, the synchronization performance was investigated for direct, through 1 hub and through 2 hubs connections between the master clock and the slave clock. From the experiment results, we observed that time synchronization under 90 ns with 1,000 seconds observation interval can be achieved in the case of direct connection.