• Journal of the Korea Computer Industry Society
• /
• v.2 no.10
• /
• pp.1285-1290
• /
• 2001

These days, good-quality multimedia educational data are exceedingly needed for ICT(Information and Communication Technology)-based instruction in elementary and secondary schools. In order to produce high quality multimedia educational data, it is important to design a series of development process and conduct a coherent examination. This paper presents a process of developing multimedia educational data and provides systematic assessment standards with respect to each step in which an evaluation is required. The step-by-step assessment standards may serve as a guideline in managing and monitoring the entire developmental process of multimedia educational data.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2020.05a
• /
• pp.107-108
• /
• 2020

최근 센서데이터 활용 영역이 넓어지면서 데이터 분석 서비스가 활성화되고, 분석을 용이하게 할 수 있는 환경으로 진화하고 있다. 이에 따라 센서데이터의 신뢰성 보장이 필요하다. 신뢰성을 갖는 환경모니터링을 위해서는 센서로부터 수집된 환경 데이터의 분포 및 값을 살펴본 후 데이터가 표현하는 현상을 더 잘 이해하고, 센서 및 센서데이터에 대한 잠재적인 특이점을 발견을 선행하여야 한다. 이를 위해 EDA를 통해 수집된 센서 값을 시각화하고 분석에 주어진 데이터의 개별 속성의 특징 및 상관관계를 도출한다. 본 연구의 EDA 분석 결과는 센서데이터의 신뢰성을 평가하기 위해 사용한다.

• Investigative Magnetic Resonance Imaging
• /
• v.22 no.4
• /
• pp.218-228
• /
• 2018

Purpose: The objective of this study is to determine the effect of physical changes on MR temperature imaging at 7.0T and to examine proton-resonance-frequency related changes of MR phase images and T1 related changes of MR magnitude images, which are obtained for MR thermometry at various magnetic field strengths. Materials and Methods: An MR-compatible capacitive-coupled radio-frequency hyperthermia system was implemented for heating a phantom and swine muscle tissue, which can be used for both 7.0T and 3.0T MRI. To determine the effect of flip angle correction on T1-based MR thermometry, proton resonance frequency, apparent T1, actual flip angle, and T1 images were obtained. For this purpose, three types of imaging sequences are used, namely, T1-weighted fast field echo with variable flip angle method, dual repetition time method, and variable flip angle method with radio-frequency field nonuniformity correction. Results: Signal-to-noise ratio of the proton resonance frequency shift-based temperature images obtained at 7.0T was five-fold higher than that at 3.0T. The T1 value increases with increasing temperature at both 3.0T and 7.0T. However, temperature measurement using apparent T1-based MR thermometry results in bias and error because B1 varies with temperature. After correcting for the effect of B1 changes, our experimental results confirmed that the calculated T1 increases with increasing temperature both at 3.0T and 7.0T. Conclusion: This study suggests that the temperature-induced flip angle variations need to be considered for accurate temperature measurements in T1-based MR thermometry.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.10 no.6
• /
• pp.626-632
• /
• 2017

Since natural disaster occurs increasingly and becomes complicated, it causes deaths, disappearances, and damage to property. As a result, there is a growing interest in the development of ICT-based natural disaster response technology which can minimize economic and social losses. In this letter, we introduce the main functions of the forest fire management platform by using images from an UAV. In addition, we propose a disaster image analysis technology based on the deep learning which is a key element technology for disaster detection. The proposed deep learning based disaster image analysis learns repeatedly generated images from the past, then it is possible to detect the disaster situation of forest-fire similar to a person. The validity of the proposed method is verified through the experimental performance of the proposed disaster image analysis technique.

• Journal of the Korea Society of Computer and Information
• /
• v.22 no.10
• /
• pp.47-54
• /
• 2017

In this paper, we propose a connected car platform architecture called Mobile Second for developing of verity convergence services. A Mobile Second platform architecture is designed to provide more powerful and diverse convergence services for vehicles and drivers by applying technologies of Connected Car and ICT Convergence in various ways. The Mobile Second platform is implemented by applying Tizen IVI and Android to hardware platforms for IVI, Nexcom's VTC1010 and Freescale's i.MX6q/dl respectively. The Mobile Second platform provides the driver with the vehicle's information via IVI devices, mobile devices and PCs, etc., and provides Vehicle Selective Gateway(VSG) and Vehicle Control Framework for the driver to control his/her vehicle, and also provides a web framework to enable the use of VSG's APIs for the monitoring and controlling the vehicle information in various mobile environments as well as IVI devices. Since the Mobile Second platform aims to create new variety of services for Connected Car, it includes service frameworks for Smart Care / Self diagonostics, Mood & Entertainment services, and Runtime, libraries and APIs needed for the development of related applications. The libraries given by the Mobile Second Platform provides both a native library for native application support and a Java Script-based library for web application support, minimizing the dependency on the platform and contributing the convenience of developers at the same time.

• Journal of Multimedia Information System
• /
• v.5 no.2
• /
• pp.105-110
• /
• 2018

Autonomous cars require the integration of multiple communication systems for driving safety. Many carmakers unveil mirrorless concept cars aiming to replace rear and sideview mirrors in vehicles with camera monitoring systems, which eliminate blind spots and reduce risk. This paper presents optical vehicle-to-vehicle (V2V) communications for autonomous mirrorless cars. The flicker-free light emitting diode (LED) light sources, providing illumination and data transmission simultaneously, and a high speed camera are used as transmitters and a receiver in the OCC link, respectively. The rear side vehicle transmits both future action data and vehicle type data using a headlamp or daytime running light, and the front vehicle can receive OCC data from the camera that replaces side mirrors so as not to prevent accidents while driving. Experimental results showed that action and vehicle type information were sent by LED light sources successfully to the front vehicle's camera via the OCC link and proved that OCC-based V2V communications for mirrorless cars can be a viable solution to improve driving safety.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.41 no.7
• /
• pp.765-767
• /
• 2016

Building Energy commissioning is a process in which verifying and making the document during entire lifetime including planning, design, construction, test run of equipment, and maintenance to minimize the operational problems of building energy efficiency. The general commissioning is replacing the equipment or reconstructing the skin to achieve the performance for the design. This process is expensive and has the disadvantage of taking a long payback period by one operation. In this paper, we studied the monitoring-based commissioning (MBCx) to increase the energy efficiency of buildings through analyzing energy use data. MBCx is modeling a building energy, comparing the real energy use with it, detecting the cause of falling the efficiency, and running the optimal operation regularly.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.5
• /
• pp.67-73
• /
• 2016

Recently, wireless power transmission has attracted much interest and is the subject of much research in industry and academia. As its name implies, it is a technology which involves transferring power without wires. This paper presents the design of an ICT-based wireless power transmission system. The proposed system consists of a wireless transceiver unit and high-efficiency coil unit, which can increase both the transmission efficiency and the effective power distance. In particular, the wireless transceiver unit was designed to work with the ICT technique to enable real-time remote monitoring. Also, studies were done relating to the effect of reducing the standby power. The optimal frequency of IGBT devices used in industrial wireless power systems of 20[KHz] was utilized. The values of $23.9[{\mu}H]$ and $2.64[{\mu}F]$ were selected for L and C, respectively, through many field experiments designed to optimize the system design. In addition, an output current controlling algorithm was developed for the purpose of reducing the standby power. The results presented in this paper represent a 75[%] to 85[%] higher power transmission efficiency with a 10[%] increase in the effective power transmission distance compared with the existing systems. As a result, the proposed system exhibits a lower standby power and maintenance costs. Also, the designed wireless transceiver unit facilitates fault detection by means of user acquired data with the development of the ICT applied program.

• International Journal of Contents
• /
• v.11 no.2
• /
• pp.37-49
• /
• 2015

Sensors, equipment, ICT facilities and their corresponding software have a relatively short lifetime relative to that of constructional structure, so these devices have to be continuously fixed or exchanged during maintenance and management. Furthermore, software or analysis tools should be periodically upgraded according to advances in ICT and analysis technology. Conventional monitoring systems have serious problems in that it is difficult for site engineers to modify or upgrade hardware and analysis algorithms. Moreover, we depend on the original system developer when we want to modify or upgrade inner program structures. In this paper, we propose a novel design for integrated maintenance and management of a monitoring system by applying the mobile cloud concept. The system is intended for use in disaster prevention of constructional structures, including bridges, tunnels, and in traditional buildings in a local heritage village, we analyze the status of these structures over a long term or a short-term period as well as in disaster situations. Data are collected over a mobile cloud and future expectations are analyzed according to probabilistic and statistical techniques. We implement our integrated monitoring system to solve the existing problems mentioned above. The final goal of this study is to design and implement a monitoring system for more than 10,000 structures spread within Korea. Furthermore, we can specifically apply the monitoring system presented here to a bridge made from timber in Asan Oeam Village and a traditional house in Andong Hahoe Village to monitor for possible disasters. The entire system design and implementation can be developed on the LinkSaaS platform and the monitoring services can also be implemented on the platform. We prove that the proposed system has good performance by performing a TTA authentication test, web accommodation test, and operation test using emulated data.

• Journal of Platform Technology
• /
• v.8 no.4
• /
• pp.59-69
• /
• 2020

Recently, the seriousness of ultrafine dust and fine dust has emerged as a national disaster, but small and medium-sized cities in provincial areas lack fine dust monitoring stations compared to their area, making it difficult to manage fine dust. Although the computing resources for collecting and processing fine dust data are not large, it is necessary to utilize cloud and private and public data to share data. In this paper, we proposed a small edge computing system that can measure fine dust, ultrafine dust and temperature and humidity and process it to provide real-time control of fine dust and service to the public. Collecting fine dust data and using public and private data to service fine dust ratings is efficient to handle with edge computing using raspberry pie because the amount of data is not large and the processing load is not large. For the experiment, the experiment system was constructed using three sensors, raspberry pie and Thinkspeak, and the fine dust measurement was conducted in northern part of kyongbuk region. The results of the experiment confirmed the measured fine dust measurement results over time based on the GIS data of the private sector.