• Korean Journal of Applied Biomechanics
• /
• v.20 no.3
• /
• pp.253-259
• /
• 2010

The aim of IAAF's Biomechanics project, initially launched at the 1987 World Championships in Rome, is to support athletes and coaches in the optimization and improvement of their training and competition performance. The IAF and the IAAF supports biomechanical projects, as a service to their Member Federations, starting from the IAAF World Championships in Rome 1987. In 1997, at the IAAF World Championships of Athens. In 1995, at the IAAF World Championships in Goteborg and in co-operation with the Swedish Sport Institute of Karlstad and under the leadership of Anders Bergstrom a biomechanical research on "Throws" was conducted. In 2005, at the IAAF World Championships in Helsinki on 100m - Pole vault, High Jump, Triple Jump, Javelin, under the leadership of Prof. Paavo Komi. The IAAF published the final report in 2008 with a supplement of NSA. In 2007, at the IAAF World Championships of Osaka, in co-operation with Osaka University of Health and Sport Sciences and under the leadership of Prof. Michiyoshi Ae the IAAF received a final report on; short sprint, distance running, high jump, long jump, shot put and javelin. In 2009, at the IAAF World Championships of Berlin, in co-operation with the DLV and the leadership of Helmar Hommel (GER). The purpose of this study is to draw up a plan to perform an effective biomechanics project at 2011 IAAF World championship in Daegu.

• Korean Journal of Applied Biomechanics
• /
• v.21 no.5
• /
• pp.503-510
• /
• 2011

The purpose of this study was to find the biomechanical research project result carried out at 2011 IAAF World championship in Daegu. This project was approved by the International Amateur Athletic Federation(IAAF) and financially supported by the Ministry of Culture, Sports and Tourism(MCST) and, Korea Association of Athletics Federations(KAAF). The total number of the project members was 20, including the members of the Scientific Committee, the Korean Society of Sport Biomechanics(KSSB) and graduate students as assistants. The objective of this project has been to analyze the performance in the track events(100 m, 110 mH) and field events(Long Jump, High Jump, Triple Jump, Pole Vault, Javelin Throw and Shot Put). This project was focused on the biomechanical research only. This kind of analysis has been carried out at major competitions for more than a decade, as it provides coaches and athletes with very useful information as an aid to training programmes and competition preparation. The biomechanical analysis of the top athletes in the world in each specialty serves as a reference for assessing technique and rationalizing the results achieved. The results will be disseminated world-wide and coaches will be in a better position to design training strategies in line with current world trends.

• Korean Journal of Applied Biomechanics
• /
• v.21 no.5
• /
• pp.573-584
• /
• 2011

The purpose of this study was to perform a kinematic analysis of the high jump techniques of the three men's medalists at the 2011 IAAF Championships in Daegu (August 27-September 4, 2011). In particular, a three-dimensional coordinates method was used to analyze the last three strides before touchdown, the touchdown techniques, and the movements after takeoff toward the bar. An analysis of the, data for the biomechanical characteristics of the world's best high jumpers could contribute to an improvement in the performance of a national high jumper. The first conclusion of the data analysis was that the arm movements of the gold medalist, J. Williams, had a single arm form, whereas the arm movements of the other medalists were a double arm form. Second, the difference in the knee joint angles upon touchdown and toe-off was $10^{\circ}$. Third, J. Williams achieved his maximum CM height after takeoff (1.26 m) using the maximum flexion of his knee joint. Fourth, the foot contact duration of A. Dmitrik (0.11 s) was the shortest among the medalists, and the ratio for his transformation of horizontal velocity to vertical velocity was the greatest (75.25%) among the three. Last, the maximum CM height of T. Barry was the greatest, and his foot contact duration was the longest.

• Korean Journal of Applied Biomechanics
• /
• v.21 no.5
• /
• pp.529-540
• /
• 2011

The purpose of this study was to evaluate the kinematic characteristics of $5^{th}$ and $6^{th}$ hurdle clearances during the final of the 110-m hurdles at the IAAF World Championships, Daegu 2011. To this end, the hurdling motions of the top 4 ranked male hurdlers in the competition were analyzed. A total of 12 cameras were used to record their motions, with a sampling frequency of 120 Hz. The cameras were calibrated using $11{\times}2{\times}1\;m$ control objects that covered all of the lanes (1st~8th lanes). After analyzing all the data, we arrived at the following results. In the take-off phase, all athletes revealed similar take-off times (CT), and similar distances from the take-off to hurdleto (L1) and hurdle to landing (L2). In particular, Turner, ranked $3^{rd}$, had an inconsistent L2 and may need further training to correct it. In the flight phase, Richardson, ranked $1^{st}$, showed the longest flight distance, whereas Xiang, who was ranked $2^{nd}$, showed the highest CG height from the hurdle. For the step patterns, to increase the pitch frequency, Richardson and Xiang used shorter 3-step lengths than Turner and Oliver.

• Korean Journal of Applied Biomechanics
• /
• v.23 no.3
• /
• pp.189-200
• /
• 2013

The purpose of this study was to compare the kinematic analyses of the women's pole vault skills difference between skilled group (1st to 8th place) and less skilled group (10th to 15th place) who participated in IAAF World Championships Daegu 2011. To achieve this goal, 16 women's pole vault player's kinematic analyses was conducted. Player's best performance was recorded by five normal video cameras operating at 60 Hz. The results of this study through the research procedures above are as follows. First, Skilled group's average step length and the ratio of step length to her height were longer than less skilled's group in run-up phase. Second, Skilled group's horizontal velocity was faster than less Skilled group's results. And pole plant angle was lower than less Skilled group's results in take-off phase. Third, Maximum pole flexion angle did not show difference of between two groups in pole bending phase. However, Skilled group's vertical velocity was higher than less skilled group's results.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.3
• /
• pp.787-794
• /
• 2010

This paper aims to evaluate the effect of each material ingredient on mechanical and dynamic performance and to determine an optimal mixing condition of a rubber granule layer. To minimize the required number of tests, the test matrix was established by using the design of experiments (DOE). The tensile tests were then performed to identify the mechanical properties. Also, to evaluate the dynamic performance that the IAAF has required for athletics tracks for athletes' safety and balance, a series of impact tests were performed by using the so-called the "artificial athlete" machine. Finally, the response surface methodology was used to decide the optimal mixing conditions needed to achieve a high level of mechanical properties and dynamic performance.

• Korean Journal of Applied Biomechanics
• /
• v.21 no.5
• /
• pp.595-602
• /
• 2011

The long jump motion of 8 finalist of men's long jump of IAAF World Championships Daegu 2011 were analysed and the kinematic characteristics of the technique were investigated. The kinematic characteristics of long jump motion of 8 finalist were as follows. In the run-up phase, the average length of 3, 2, and 1 stride were $2.21{\pm}0.08$ m, $2.46{\pm}0.18$ m, and $2.19{\pm}0.16$ m, respectively. The change in the height of the center of gravity was $0.09{\pm}0.02$ m. The average velocity of 3, 2, and 1 stride was $10.37{\pm}0.32$ m/s, $9.63{\pm}0.32$ m/s, and $10.69{\pm}10.69$ m/s, respectively. In the take-off phase, the horizontal velocity, the vertical velocity, the reduction of horizontal velocity was $9.00{\pm}0.37$ m/s, $3.04{\pm}0.27$ m/s, and $1.69{\pm}0.34$ m/s, respectively. The minimum knee angle and the take off angle was $157{\pm}6.57^{\circ}$ and $18.5{\pm}2.24^{\circ}$, respectively. In the flight phase, the flight time and the maximum height of the center of gravity was $0.82{\pm}0.05$ s, and $1.70{\pm}0.10$ m, respectively. In the landing phase, the landing length was $0.51{\pm}0.06$ m. The body angle, the knee angle, and the hip angle was $71{\pm}20.93^{\circ}$, $136{\pm}19.19^{\circ}$, and $85{\pm}9.58^{\circ}$, respectively. The kinematic characteristics of long jump motion with good record were shown as follows. The reduction of the horizontal velocity in the take-off phase was minimized while the velocity of the run-up were maximally maintained. The vertical velocity in the take-off phase was increased with rapidly extended knee and the high center of gravity.

• Korean Journal of Applied Biomechanics
• /
• v.21 no.5
• /
• pp.541-550
• /
• 2011

The purpose of this study was to investigate the kinematic characteristics of the $5^{th}$ and $6^{th}$ hurdle clearances during the final of the 100-m hurdles event at the IAAF World Championships, Daegu 2011. To this end, the hurdling motions of the top 4 ranked female hurdlers in the competition were analyzed. A total of 12 cameras were used to record their motions, with a sampling frequency of 120 Hz. The cameras were calibrated using $11{\times}2{\times}1\;m$ control objects that covered all of the lanes ($1^{st}{\sim}8^{th}$ lanes). After analyzing all the data, we arrived at the following results. For the take-off phase, a negative relationship between the take-off time (CT) and athlete's rank was found. In addition, the average distances from the hurdle to take-off (L1) were shown to be 2.23 m and 2.17 m for the $5^{th}$ and $6^{th}$ hurdles, respectively. For the distance from the hurdle to landing (L2), Pearson ($1^{st}$ rank) and Carruthers($2^{nd}$ rank) showed inconsistent patterns whereas Harper ($3^{rd}$ rank) and Porter ($4^{th}$ rank) showed consistent patterns. All althetes revealed similar 3 steps patterns between hurdles, which consisted of a shorter $1^{st}$ step, longer $2^{nd}$ step and shorter $3^{rd}$ step.

• Korean Journal of Applied Biomechanics
• /
• v.21 no.5
• /
• pp.603-610
• /
• 2011

The long jump motions of 8 finalists in the women's long jump at the IAAF World Championships, Daegu 2011 were analyzed, and the kinematic characteristics of their techniques were investigated. The kinematic characteristics of the long jump motion of the 8 finalists were as follows. In the run-up phase, the length of the 2 stride was $108{\pm}6.92%$ that of the 3 stride. The length of the 1 stride was $91{\pm}5.78%$ that of the 2 stride. The change in the height of the center of gravity was $0.07{\pm}0.03$ m. The maximum velocity during the run-up phase was $9.44{\pm}0.13$ m at the 1 stride. In the take-off phase, the horizontal velocity, vertical velocity, reduction in horizontal velocity were $7.80{\pm}0.15$ m/s, $2.96{\pm}0.14$ m/s, and $1.64{\pm}0.19$ m/s, respectively. The minimum knee angle and take-off angle were $151{\pm}8.89^{\circ}$ and $20.7{\pm}1.03^{\circ}$, respectively. In the flight phase, the flight time and maximum height of the center of gravity were $0.78{\pm}0.03$ s, and $1.60{\pm}0.05$ m, respectively. In the landing phase, the landing length was $0.50{\pm}0.07$ m. The trunk angle, knee angle, and hip angle were $74{\pm}18.75^{\circ}$, $131{\pm}10.45^{\circ}$, and $82{\pm}9.03^{\circ}$, respectively. The kinematic characteristics of the motion of a good long jump were as follows. The reduction in the horizontal velocity in the take-off phase was minimized, and the maximum velocity of the run-up was maintained. The vertical velocity in the take-off phase was increased using a rapidly extended knee and high center of gravity.

• Korean Journal of Applied Biomechanics
• /
• v.21 no.5
• /
• pp.661-667
• /
• 2011

The purpose of the study was to compare selected kinematic variables between the female medalists and a Korean female javelin thrower at the IAAF World Championships, Daegu 2011. Three medalists and one Korean javelin thrower that participated in the Championships were videotaped using three high-speed cameras (300 frames/s, EX-F1 Exilim, Casio, Japan). This study identified the performance differences between the two groups. The results showed that the Korean female javelin thrower (KFJT) clearly had a greater delivery phase time than the female medalists. In order to throw farther, a thrower must exert a greater force to accelerate their body in a short time. This study also found that the release velocity of the KFJT was lower than that of the female medalists. The KFJT showed evidence of using her extremities differently to achieve the maximum release velocity. When comparing the inclination angle of the trunk across javelin throwers, the lowest value was recorded in the KFJT. Because the trunk position at release plays a significant role in determining the release height and release velocity, the KFJT should not rely on her upper extremities to achieve as high a release velocity as possible.