• 한국CDE학회논문집
• /
• 제6권4호
• /
• pp.215-221
• /
• 2001

In the zigzag milling of a pocket having islands, tool retraction is one of the primary factors that decrease productivity. Therefore, tool path with minimum number of tool retraction has been needed. Most researches about this topic have been concentrated on obtaining the optimum solution formulated through the geometric reasoning off pocket. Recently, several attempts were made to simplify this problem into region partitioning in order to get the numerically expressed minimum solution. In this research, a method reducing the number of tool retractions extended from existing region partitioning is provided. Applying the segment that is normal to the reference direction of zigzag milling, region partitioning is carried out and structural elements of the region are searched via graphs of islands and characteristic points. Through the processes presented, the number of region partitioned is less than that of existing processes.

• Journal of Pharmaceutical Investigation
• /
• 제21권4호
• /
• pp.237-245
• /
• 1991

Matrix type silicone rubber devices were designed for long-term implantable drug delivery system. Release controlling agents (RCA), i.e., polypropylene glycol, polyethylene glycol, were employed to control drug release from the devices. The release rate of drug from RCA dispersed silicone matrices was mainly dependent on hydrophilicity-hydrophobicity of drug and RCA. In the case of hydrophilic drug, the release from the RCA dispersed matrix was regulated by swelling kinetics. Especially when the relatively hydrophobic polypropylene glycol was used, swelling control mechanism induced zero-order release kinetics. Whereas, the release of hydrophobic drug was resulted from partition mechanism. The effect of RCA was to increase drug diffusivity.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 1999년도 추계학술대회 논문집
• /
• pp.139-145
• /
• 1999

The design of driver's cab includes the structure of cab frame, the layout of driver's cab equipment and facilities, i.e. driver's desk, seat, windows, floor, interior equipment, cab partition etc. The concept applied to the detail design has to be based on the ergonomics to guarantee the safety, comfort, and easy operation for the driver. In the aspect of manufacture, one more factor 'modulization' has to be considered into the design of sub blocks for cost-down. The design has to be implemented in the space allocated for driver's cab, which space is directly determined by the cab frame, optimized for the layout of driver's cab. The design process and results of the driver's cab for KHST will be described in this paper.

• 한국염색가공학회지
• /
• 제10권1호
• /
• pp.25-32
• /
• 1998

In the prior study, we found that the dye uptakes of C. I. Disperse Violet 1 on PET in hexane and cyclohexane were higher than those in the other solvents. Therefore, in this study, the dye uptakes and the partition coefficients in alkanes having different number of carbon atoms were obtained and their relationship to the solubilities of the dye in alkanes was also investigated. As the number of carbon atoms of alkanes increases, solubility of the dye increases but the dye uptake decreases. This is due to the fact that the hydrophobicity of alkanes become relatively strong as increasing the number of carbon atoms. It was also found that the dye uptakes in iso-alkanes were larger than those in normal alkanes. This is because that the branched alkanes(iso-alkanes), judging from the tendency of lowering solubility and increasing dye uptake as decreasing the number of carbon atoms of alkanes, behave like the alkanes with less number of carbon atoms rather than the alkanes with the same number of carbon atoms. The logarithmic plot of the dye uptakes vs. the solubilities of the dye showed that the dye uptakes are linearly and inversely proportional to the solubilities. This is in good accordance with the results of the prior study. The heat of dyeing was also calculated from the equilibrium adsorptions at various temperatures. It seemed that the dyeings of PET by C. I. Disperse Violet 1 in nonane, decane, iso-pentane and iso-octane were rather endothermic processes. Dyeing rates in alkanes were somewhat delayed unlike general appearances in solvent dyeing.

• Applied Biological Chemistry
• /
• 제40권1호
• /
• pp.71-75
• /
• 1997

농약의 물리화학적 특성에 관한 연구의 일환으로 captafol의 수용성, 가수분해, 증기압, 분배계수를 표준 측정기법 인 미국 EPA와 OECD 방법에 준하여 측정하였다. 수용성은 $25^{\circ}C$ 조건에서 2.24 ppm이었으며, 가수분해에 의한 반감기는 $25^{\circ}C$에서 77.8시간(pH 3.0), 6.54시간(pH 7.0), 0.72시간(p班 8.0)으로 나타나 알칼리 조건에서 불안정한 화합물임을 확인하였다. 산성조건에서의 반감기는 온도에 영향을 받지 않았으나, 중성, 알칼리 조건에서의 반감기는 $40^{\circ}C$에서 매우 짧았다. 가수분해 실험의 표준 대조물질인 diazinon을 이용하여 실험한 결과 본 연구실에서 수행한 가수분해 실험은 적합한 것으로 판정되었다. Captafol은 상온에서 증기압 ($8.27{\times}10^{-9}\;torr,\;20^{\circ}C$)이 높지 않으므로 휘발에 의하여 대기환경에 영향을 미칠 가능성은 없으리라 예상되었고, log P=6.94-(4401.6/T)라는 관계식을 유도할 수 있었다. Captafol은 옥탄올/물 분배계수치가 높아(Kow=1,523) 먹이연쇄를 통한 생물농축의 가능성이 예상되나 가수분해가 빠르기 때문에 비록 captafol이 수계에 노출된다고 하여도 분해가 빠르게 일어나 어류 생체내에 농축되어 인체에까지 영향을 미칠 가능성은 매우 낮을 것으로 사료되었다.

• 한국재료학회지
• /
• 제2권6호
• /
• pp.389-397
• /
• 1992

Li의 양과 Al의 양을 달리한 $\alpha$(HCP) 단상 및 $\alpha$(HCP)+${\beta}$ (BCC) 2상 조직인 Mg-Li-Al합금을 시료로 하여 이 합금의 가공성과 시효경화륵성을 조사한 결과 $\alpha$단상보다는 $\alpha$+${\beta}$ 2상 조이,$\alpha$+${\beta}$ 2상조직에서는 Al양이 많을수록 가궁성이 증가하였으며 Mg-8.08Li-4.26Al의 경우 가공한계값은 62%였다. 이와같이 가공성이 증가한 이유는 basal plane뿐만 아니라 pyramidal plane과 prism plane에서도 슬립이 일어났기 때문이다. $\alpha$단상의 경우 MgL$i_2$ Al(${\theta}$)의 석출이 일어나지 않았으나 $\alpha$+${\beta}$ 2상 조직의 곁우 ${\beta}$상 내에서 ${\theta}$의 석출에 의한 피크경도같이 나타났으며, 2상 조직의 경우 경도값은 Al양이 많을수록 증가하였는데 이것은 Al양의 증가에 따른 Al Partition에 의한$\alpha$ 상의 강화와 ${\beta}$상에서의 석출물 증가에 의한 것으로 생각된다.

• 한국대기환경학회지
• /
• 제31권6호
• /
• pp.548-561
• /
• 2015

Atmospheric concentrations of polychlorinated dibezo-p-dioxins and furans (PCDD/Fs) were investigated at urban-residential (Group I: Suwon, Guri and Goyang), industrial (Group II: Ansan, Siheung and Bucheon), urban-rural mixed (Group III: Yangju, Pocheon and Dongducheon) and rural regions (Group IV: Yangpyeong) in Gyeonggi-do from February 2012 to November 2012 quarterly. The concentrations of PCDD/Fs ranged from 0.018 to $0.109pgTEQm^{-3}$ in Group I (mean value: $0.061pgTEQm^{-3}$), 0.059 to $0.367pgTEQm^{-3}$ in Group II (mean value: $0.179pgTEQm^{-3}$), 0.072 to $0.836pgTEQm^{-3}$ in Group III (mean value: $0.334pgTEQm^{-3}$) and 0.014 to $0.066pgTEQm^{-3}$ in Group IV (mean value: $0.034pgTEQm^{-3}$), respectively. In spite of the less PCDD/F emission sources than Group II (industrial regions), the level of PCDD/Fs in urban-rural mixed area showed the highest values with high fluctuation. It's likely that the Group III was affected by fugitive emissions such like biomass burning and unregulated open burning. The mean contribution of particle phase to total PCDD/F concentration was above 83% because most of PCDD/F congeners were partitioned into particle phase. We evaluated their gas-to-particles equilibriums with the regression between the particle-gas partition coefficient, $K_P(m^3{\mu}g^{-1})$ and corresponding subcooled liquid vapor pressure ($P_L$). The logarithm-$K_P$ of PCDD/Fs was poorly correlated with $P_L$ at low ambient temperature (below $10^{\circ}C$) and the slope (m) values for log-log plots of the $K_P$ vs. $P_L$ was steeper in the Group 2 and Group 3 than residential area. It implies that the slope values were likely influenced by both the direct emission source of PCDD/Fs and ambient temperature.

• 한국지능시스템학회논문지
• /
• 제20권2호
• /
• pp.165-172
• /
• 2010

임상 데이터마이닝에서 최적의 특징 집합을 선택하는 것은 주어진 데이터로부터 생성된 모델의 복잡성을 줄일 뿐만 아니라 유용성을 향상시키는 데에 매우 중요하고, 선택된 특징들의 임계값은 질병의 감별진단을 위해 임상 전문가의 결정기준으로 사용된다. 본 논문에서는 데이터의 공간적인 분포, 즉 중첩영역에서 중복 속성값을 포함하는 데이터의 분리성 정도를 평가함으로써 연속형 속성을 가진 데이터에 대한 퍼지 이산화기법을 제안한다. 제안된 방법에서 중복 속성값의 가중치 평균값은 각 특징의 임계값(즉 경계값)을 결정하기 위해서 사용되었고, 러프집합은 전체 특징들 중에서 중요특징들의 집합을 선택하기 위해서 이용하였다. 제안된 방법의 타당성을 검증하기 위해 호흡곤란을 주호소로 내원한 668명의 환자 데이터를 근거로 3가지 이산화방법과 제안된 이산화방법에 대한 실험을 수행하였다. 실험결과, 퍼지분할을 기반으로 한 이산화방법이 하드분할을 기반으로 한 이산화방법에 비해서 평균 분류정확도와 G-mean 성능에서 보다 좋은 결과를 제공함을 확인하였다.

• 복식
• /
• 제60권1호
• /
• pp.117-134
• /
• 2010

The multilateral attempt for present applications of art school of thought and expression is leading modern fashion as a chapter of various artistic expression. In fashion, historic art thinking which predominated the period are source of optional inspiration not simply being generated, culminated and disappear but layout principles which can reemerge as periodical needs. In other words, the past styles are the source of inspiration of new trend of the present time and will serve as the text that give birth to yet another trend. In this study, I conducted the research on the layout principles of Modernism Architecture in aspects of pure visibility and the layout characteristics. And I analyzed cases of modern fashion which were appling architectural layout principles in the view point of formal construction dimension. As the result, the layout principles of Modernism Architecture have the characteristics of diagram linearity, geometric planarity and exclusive closing. And I was applying the architectural layout principles of Modernism to fashion. The layout principles of Modernism Architecture have the tendency of lacking history types, abstract plane partition and reductionism purity in fashion. The meaning of this study is follows: The characteristics of art school of thought are given shape by appling & analysing the architectural layout principles of historical art school of thought to modern fashion in the view point of formal construction dimension. The applied possibility of historical art school of thought as the source of inspiration about the fashion design is extended.

• Natural Product Sciences
• /
• 제5권3호
• /
• pp.113-120
• /
• 1999

Nitric oxide (NO) is a free radical synthesized from L-arginine by nitric oxide synthase (NOS). It is believed that NO is an important mediator in numerous physiological and inflammatory responses. Particularly, a large amount of NO released from the inducible nitric oxide synthase (iNOS) is mostly associated with inflammatory processes. Overproduction of NO in these processes including sepsis and autoimmune diseases can have deleterious consequences and pathophysiologic relevance. Therefore, for the discovery of new inhibitory agents against iNOS activity, we have evaluated about 100 kinds of natural products after partition into three layers (n-hexane, ethyl acetate and aqueous) from 100% methanol extracts to study inhibitory effects on iNOS activity induced by lipopolysaccharide (LPS) in RAW264.7 cells culture system. As a positive control, curcumin, which is known as an anti-tumor promoter, anti-inflammatory agent as an iNOS inhibitor, was used and showed the dose-dependent inhibitory effect $(IC_{50},\;2.5\;{\mu}g/ml)$. Among tested fractions, the n-hexane fraction of Cimicifuga heracleifolia $(IC_{50}:\;9.65\;{\mu}g/ml)$, Forsythiae fructus $(IC_{50}:\;6.36\;{\mu}g/ml)$, Saposhnikovia divaricata $(IC_{50}:\;5.92\;{\mu}g/ml)$, and the ethyl acetate fraction of Chrysanthemum sibiricum $(IC_{50}:\;2.56\;{\mu}g/ml)$, Gastrodia elata $(IC_{50}:\;3.46\;{\mu}g/ml)$, and the aqueous fraction of Dianthus chinensis $(IC_{50}:\;6.73\;{\mu}g/ml)$, Euonymus alatus $(IC_{50}:\;6.78\;{\mu}g/ml)$, Mechania urticifoloria $(IC_{50}:\;8.01\;{\mu}g/ml)$ showed strong inhibitory activity against LPS-stimulated iNOS. Especially, the ethyl acetate fraction of Chrysanthemum sibiricum $(IC_{50}:\;2.56\;{\mu}g/ml)$, which exhibited the strongest inhibition against iNOS, was fractionated with silica-gel column chromatography. These subfractions exhibited dose-dependent inhibition against iNOS activity in the range of $2.59-5.6\;{\mu}g/ml$ except for fraction No. 3, 4, 5, 6, 8, 9, and 16. Our study shows that Chrysanthemum sibiricum has the strongest inhibitory effect against iNOS activity and has similar effect to curcumin. Therefore, further studies for the identification of active principles from Chrysanthemum sibiricum and investigation for the mechanism of the inhibition of iNOS by active principles will be performed.