• 융합신호처리학회논문지
• /
• 제15권2호
• /
• pp.48-54
• /
• 2014

원소 ${\in}F(p)$에 대하여 두 종류의 기저함수가 알려져 있다. 통상적인 다항식 기저(polynomial bases)는 $\{1,{\alpha},{\alpha}^2,{\cdots},{\alpha}^{n-1}\}$로 이루어지고 이와 다르게 정규 기저(normal bases)는 $\{{\alpha},{\alpha}^p,{\alpha}^{p^2},{\cdots},{\alpha}^{p^{n-1}}\}$의 형태를 갖는다. 본 논문에서는 소수 p의 원소로 이루어지는 유한장 GF(p)상에서 n차원 벡터공간인 확대장 $GF(p^n)$을 이룰 수 있는 정규기저의 발생과 생성에 대하여 검토하고 정규기저를 기반으로 부호계열 발생알고리즘을 분석하여 발생기구성함수를 도출하였다. 차수 n=5와 n=7인 두 종류의 정규기저를 생성할 수 있는 정규다항식을 발견하고 부호계열 발생기를 설계 구성하였다. 마지막으로 Simulink를 이용하여 두 종류(n=5, n=7)의 부호계열 그룹을 발생시키고 발생된 부호계열간의 자기상관함수, $R_{i,i}(\tau)$와 상호상관함수, $R_{i,j}(\tau)$, $i{\neq}j$ 특성을 분석하였다. 이 결과로부터 정규기저를 이용한 부호계열 발생알고리즘의 분석, 그리고 부호계열 발생기 설계와 구성이 타당함을 확인하였다.

• 디지털융복합연구
• /
• 제14권10호
• /
• pp.129-136
• /
• 2016

본 연구는 융복합서비스산업 종사자들을 대상으로 사회적지원이 융복합서비스산업 종사자의 조직몰입 및 서비스품질에 미치는 영향을 탐구하는데 그 목적이 있다. 본 연구를 위한 자료는 서울시와 수도권 소재 20개 중소기업에 종사하는 233명의 융복합서비스산업 종사자들로부터 질문지를 활용하여 수집하였다. 주된 자료 분석은 구조방정식모형분석기법을 사용하였다. 단계적 회귀분석방법을 통한 연구 분석 결과 사회적지원의 측정변수인 동료의 지원과 상사의 지원은 융복합서비스산업 종사자의 조직몰입에 유의미한 정(+)의 영향을 미치는 것으로 나타났다. 또한, 동료의 지원과 상사의 지원을 거친 조직몰입이 서비스품질에 유의미한 정(+)의 영향을 미치는 것으로 나타났다. 즉, 조직구성원간의 관계 지향적 지원감독이 조직몰입과 서비스 품질에 영향을 주는 것으로 나타났다. 이상의 연구결과를 통해 이론적 실증적 함의를 논의하고 향후 연구 과제를 제시하였다.

• Smart Structures and Systems
• /
• 제16권5호
• /
• pp.891-918
• /
• 2015

In many of microdevices a part of a microbeam is covered by a piezoelectric layer. Depend on the application a DC or AC voltage is applied between upper and lower side of the piezoelectric layer. A common method in many of previous works for evaluating the response of these structures is discretizing by Galerkin method. In these works often single mode shape of a uniform microbeam i.e. the microbeam without piezoelectric layer has been used as comparison function, and so the convergence of the solution has not been verified. In this paper the Galerkin method is used for discretization, and a comprehensive analysis on the convergence of solution of equation that is discretized using this comparison function is studied for both clamped-clamped and clamped-free microbeams. The static and dynamic solution resulted from Galerkin method is compared to the modal expansion solution. In addition the static solution is compared to an exact solution. It is denoted that the required numbers of uniform microbeam mode shapes for convergence of static solution due to DC voltage depends on the position and thickness of deposited piezoelectric layer. It is shown that when the clamped-clamped microbeam is coated symmetrically by piezoelectric layer, then the convergence for static solution may be obtained using only first mode. This result is valid for clamped-free case when it is covered by piezoelectric layer from left clamped side to the right. It is shown that when voltage is AC then the number of required uniform microbeam shape mode for convergence is much more than the number of required mode in modal expansion due to the dynamic effect of piezoelectric layer. This difference increases by increasing the piezoelectric thickness, the closeness of the excitation frequency to natural frequency and decreasing the damping coefficient. This condition is often indefeasible in microresonator system. It is concluded that discreitizing the equation of motion using one mode shape of uniform microbeam as comparison function in many of previous works causes considerable errors.

• 디지털융복합연구
• /
• 제19권8호
• /
• pp.327-335
• /
• 2021

융합이라는 시대의 흐름과 더불어 상상력과 창조성에 기반을 둔 디자인·공예의 본질적 속성의 효과적 결합을 위해서는 학문적, 방법적 측면에서 다양한 시도가 필요하다. 본 연구는 2020년 2학기에 실행된 국민대학교 팀팀Class의 디자인·공예 융합 교육 프로그램의 운영 사례를 분석하는 것이다. 이를 위해 기존 문헌연구를 통한 디자인·공예 융합 교육 관련 중요 항목을 5가지(대상, 방법, 운영, 공간, 소통)로 구분해 분석하였다. 이를 통해 디자인·공예 융합 교육 프로그램에 대한 경험과 문제점, 그리고 향후 디자인·공예 융합 교육 프로그램의 운영에 적용 가능한 해결방안 제시에 본 연구의 목적이 있다. 본 연구에서는 국민대학교 팀팀Class 디자인·공예 융합 교육 프로그램으로 사례연구 대상을 한정하였으나 향후 지속적인 연구를 통해 향후 다가올 코로나(COVID-19) 이후 시대의 새로운 환경에 적용 가능한 디자인·공예 융합 교육 프로그램을 위해 후속 연구가 진행되어야 할 것이다.

• 기술혁신연구
• /
• 제22권3호
• /
• pp.1-35
• /
• 2014

본 연구는 기술연관분석으로 단기 상용화를 위한 기술개발과제에 투입된 기술간 융합현황을 분석하였다. 기술연관분석은 산업구조분석의 체계를 기술기획 분야에 적용한 것이다. 본 사례는 기술연관분석을 활용하여 기술과 제품 간 연관도를 중심으로 분석하였으며 분석대상은 중소기업기술정보진흥원의 ' '12년 중소기업 융 복합기술개발사업'에 신청한 401개 과제이다. 분석과정은 다음과 같다. 401개 개별과제에 대해서 투입된 기술은 기술로, 개발과제에서 산출을 제품으로 정의하고 이를 투입과 산출의 행렬로 정리하였다. 투입으로 정의한 기술은 국가과학기술표준분류 상의 소분류를 분류하고, 산출로 정의한 제품은 한국표준산업분류 상의 세세분류로 정의하였다. 즉, 기술을 투입으로, 제품을 산출로 정의하여 기술의 파급도를 분석하였으며 이에 기초하여 기술연관도를 작성하였다 분석결과, IT융합에서는 임베디드 S/W의 기술파급도가 가장 높았으며, ET융합에서는 금형의 기술파급도가 가장 높았고 BT융합은 기능성 화장품 개발기술의 기술파급도가 가장 높았다. 전체적으로 IT융합에서 기술파급도가 높은 요소기술이 많았으며, ET융합에서 기술파급도가 높은 요소기술이 작았다. 따라서 기술파급도가 높은 요소기술에 대한 투자가 융합을 활성화하는 데 중요하며 전체적으로 IT분야가 요소기술의 투자 효과가 높을 것으로 판단한다.

• 한국식생활문화학회지
• /
• 제30권2호
• /
• pp.197-205
• /
• 2015

This study was conducted to investigate the bioconversion of ginsenosides as well as anti-inflammatory activities of fresh ginseng Kkakdugi during fermentation. Fresh ginseng Kkakdugi reached proper ripeness, pH 4.30, and acidity 1.69% at $15^{\circ}C$ after 10 days. Lactic acid bacteria grew until reaching $1.10{\times}10^9CFU/mL$ after 20 days of fermentation, and ${\beta}$-glucosidase activity increased from 1.154 to 1.885 units/g. The bioconversion of ginsenosides was confirmed based on increased content of Rg3, an aglycone, from 0.13 to 0.17 mg/g during fermentation through HPLC. Fresh ginseng Kkakdugi did not display cytotoxicity up to the concentrations of $80{\mu}g/mL$, regardless of ripening period. Nitrite production and expression of inflammation-related proteins, iNOS and COX-2, decreased in a dose-dependent manner regardless of ripening period. From these results, fresh ginseng Kkakdugi showed the bioconversion of ginsenosides to aglycone during the lactic acid fermentation as well as an anti-inflammatory effect through the reduction of NO production and iNOS and COX-2 expression.

• 한국전기전자재료학회논문지
• /
• 제24권12호
• /
• pp.962-968
• /
• 2011

In this study, we investigated the effects of Mn dopant (0.1~3.0 at% $Mn_3O_4$ sintered at 1000$^{\circ}C$ for 1 h in air) on the bulk trap (i.e. defect) and grain boundary properties of ZnO, ZM(0.1~3.0) using admittance spectroscopy (AS), and impedance-modulus spectroscopy (IS & MS). As a result, three kinds of defect were found below the conduction band edge of ZnO as 0.09~0.14 eV (attractive coulombic center), 0.22~25 eV ($Zn^{{\cdot}{\cdot}}_i$), and 0.32~0.33 eV ($V^{\cdot}_o$). The oxygen vacancy increased with Mn doping. In ZM, an electrically single grain boundary as double Schottky barrier was formed with 0.82~1.0 eV of activation energies by IS & MS. We also find out that the barriers of grain boundary of Mn-doped ZnO (${\alpha}$-factor=0.13) were more stabilized and homogenized with temperature compared to pure ZnO.

• 한국전기전자재료학회논문지
• /
• 제26권12호
• /
• pp.909-914
• /
• 2013

CIGS is one of thin film solar cell and has been studied so much, because of the possibility of low price and high efficiency. Until now, co-evaporation and sputtering were typical method to prepare CIGS absorption layer, and a few company commercialized solar cell by these method. However, non-vacuum process which has been studied for long time has not been progressed, though the merit of low price. Especially, aerosol deposition method has not been reported, because it is difficult to prepare a large quantity of various CIGS powder. In this study, CIGS powder was synthesized by mechanochemical method and CIGS absorption layer was deposited by aerosol deposition method. The thickness of the CIGS layer was controlled by the number of deposition and the surface roughness of it was affected by the amount of flow gas. And, also, I-V curve of it appeared metallic property in the case of 'as deposition'. After heat treatment in Se-rich atmosphere, the electrical property of it changed to a semiconductor. CdS and transparent conduction layer were formed by a typical method on it for solar cell. The efficiency of cell was appeared 0.19%. Though the efficiency was low because of the disharmony in the after-process, it was conformed that CIGS solar cell could be prepared by aerosol deposition.

• Interaction and multiscale mechanics
• /
• 제1권2호
• /
• pp.211-230
• /
• 2008

Owing to the growing size of the eigenvalue problem and the growing number of eigenvalues desired, solution methods of iterative nature are becoming more popular than ever, which however suffer from low efficiency and lack of proper convergence criteria. In this paper, three efficient iterative eigenvalue algorithms are considered, i.e., subspace iteration method, iterative Ritz vector method and iterative Lanczos method based on the cell sparse fast solver and loop-unrolling. They are examined under the mode error criterion, i.e., the ratio of the out-of-balance nodal forces and the maximum elastic nodal point forces. Averagely speaking, the iterative Ritz vector method is the most efficient one among the three. Based on the mode error convergence criteria, the eigenvalue solvers are shown to be more stable than those based on eigenvalues only. Compared with ANSYS's subspace iteration and block Lanczos approaches, the subspace iteration presented here appears to be more efficient, while the Lanczos approach has roughly equal efficiency. The methods proposed are robust and efficient. Large size tests show that the improvement in terms of CPU time and storage is tremendous. Also reported is an aggressive shifting technique for the subspace iteration method, based on the mode error convergence criteria. A backward technique is introduced when the shift is not located in the right region. The efficiency of such a technique was demonstrated in the numerical tests.

• BMB Reports
• /
• 제42권10호
• /
• pp.685-690
• /
• 2009

Angiogenesis is essential for tumor growth and vascular endothelial cell growth factor (VEGF) plays a key role in this process. Conversely, sphingosine 1-phosphate (S1P) is a biologically active sphingolipid known to play a key role in cancer progression by regulating endothelial cell proliferation and migration. In this study, the authors found that S1P increases the level of VEGF mRNA in human umbilical vein endothelial cells (HUVECs) and immortalized HUVECs (iHUVECs). Additionally, S1P was found to increase VEGF promoter activity in MS-1 mouse pancreatic islet endothelial cells. Furthermore, a pharmacological inhibitory study revealed that $G_{\alpha i/o}$-mediated phospholipase C, Akt, Erk, and p38 MAPK signaling are involved in this S1P-induced expression of VEGF. A component of AP1 transcription factor is important for S1P-induced VEGF expression. Taken together, these findings suggest that S1P enhances endothelial cell proliferation and migrat ion by upregulating the expression of VEGF mRNA.