• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 1997년도 제25회 춘계학술대회
• /
• pp.19-24
• /
• 1997

The operating torque and tribological characteristics of the cam/tappet system in an I.C. engine have an important effect on engine efficiency. In this paper, we measured the torque of cam/tappet system with respect to the oil temperature and camshaft speed to characterize the tribological behavior. Also, accelerated test was performed to analyze the wear characteristics of cam/tappet interface. The torque of the cam/tappet system decreased with respect to camshaft speed and was not significantly affected by the oil temperature. The results of accelerated test showed that the running-in wear occurred during the tests and the center of the tappet was mainly damaged by the rolling and sliding friction.

• 대한치과보철학회지
• /
• 제54권4호
• /
• pp.370-378
• /
• 2016

목적: Biomet 3i 시스템과 Astra 시스템의 내측 연결형 임플란트 고정체에 국내에서 제작된 맞춤형 CAD-CAM 지대주를 체결하여 구성 성분 간의 적합성과 나사의 안정성을 평가하고자 하였다. 재료 및 방법: 24개 3i 임플란트 중 12개의 임플란트에 기성 지대주를 연결하고, 나머지 임플란트에는 맞춤형 CAD-CAM 지대주를 연결하여 각각 Group 1과 Group 2로 분류하였다. 동일 개수와 동일한 방법으로 Astra 임플란트를 각각 Group 3와 Group 4로 분류하였다. 각각의 고정체에 지대주를 장착하여 각 계면 사이의 적합성을 micro-CT로 관찰하고 초기 풀림 토크를 측정한 후 평가하였다. 결과: 고정체-지대주의 접촉길이는 Group 1과 Group 2 사이 뿐만 아니라 Group 3와 Group 4 사이에도 유의한 차이가 없었다(Mann-Whitney test, P>.05). 하지만, 지대주와 나사의 계면 및 고정체와 나사의 계면에서 Group 2와 Group 4가 Group 1와 Group 3에 비해 각기 더 큰 접촉양상을 보여주었다(Mann-Whitney test, P<.05). 또한, Group 2와 Group 4가 Group 1과 Group 3에 비해 각기 더 낮은 나사의 초기 풀림 토크를 기록하였다(Student t-test, P<.05). 결론: CAD-CAM지대주는 임상에 적용할 만한 적합성을 지니고 있으나, 광범위한 임상 적용을 위해서는 풀림 토크가 향상되어야 할 것으로 사료된다.

• 연구논문집
• /
• 통권33호
• /
• pp.89-97
• /
• 2003

A barrel cam is used as a very important part of an index drive unit. The index drive unit must have an intermittent-rotational motion. The barrel typed cam and roller gear mechanism has the advantages of high reliability to perform a prescribed motion of a follower. This paper proposes a new method for the shape design of the barrel cam and also a CAD program is developed by using the proposed method. As defined in this paper, the relative velocity method for the shape design calculates the relative velocity of the follower versus cam at a center of roller, and then detemines a contact point by using the geometric relationships and the kinematic constraints, where the direction of the relative velocity must be parallel to a common tangential line at the contact point of two independent bodies, i.e. the cam and the follower. Then, the shape of the cam is defined by the coordinate transformation of the trace of the contact points. This paper presents shape design of the barrel cam in order to prove the accuracy of the proposed methods

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2013년도 춘계학술대회 논문집
• /
• pp.861-862
• /
• 2013

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2008년도 춘계학술대회 논문집
• /
• pp.525-526
• /
• 2008

• 한국지반환경공학회 논문집
• /
• 제3권2호
• /
• pp.5-14
• /
• 2002

본 연구에서는 지중내에 설치한 매설관에 작용하는 응력-변형 특성을 분석하였다. 연약지반의 수축과 팽창특성을 고려할 수 있는 Egg-Cam Clay 모델을 소개하였다. 기존에 사용하던 Cam Clay 모델은 연약지반의 수축 및 팽창 특성을 고려하지 못하는 단점이 있기 때문에 Cam Clay 모델을 수정하여 Egg-Cam Clay 모델을 제안하였다. 이와는 별도로 지중내의 매설관에 작용하는 응력-변형을 감소시키기 위하여 지오그리드, EPS 지오폼을 매설관과 함께 설치하였다. 탄소성모델을 이용하여 현장에 시험시공한 여러 단면에 유한요소해석한 결과 긍정적인 효과를 얻었다.

• 대한한방소아과학회지
• /
• 제34권2호
• /
• pp.75-85
• /
• 2020

Objectives Although clinical practice guidelines (CPGs) are becoming crucial in medical decision-making worldwide, there are very few development guidelines for children. Therefore, this preliminary study aimed to assess the status of worldwide except east asia-CPGs recommending complementary and alternative medicine interventions (CAM-i) in children worldwide except east asia in order to help developing Korean medicine CPGs (KMCPGs) for children. Methods To identify the current status of CPGs including CAM-i that have been developed so far, the author searched the related databases, and selected CPGs for children. The data related to the status of evidence-based CPGs, the materials related to the characteristics of CAM-i, and the details of recommendations for CAM-i were selected from the obtained findings. Results A total of 106 CPGs were identified based on the searches, of which 11 were finally selected as pediatric CPGs. These pediatric CPGs have been developed since 2007 to target various diseases. The countries developing these CPGs include the United Kingdom, Scotland, Australia, and the United States, with the U.K. having the largest share. The majority of CPGs used MEDLINE, Embase, and Cochrane library as databases. The most frequently recommended topic was acupuncture, followed by herbal medicine. Many CPGs suggested that more research was needed. Conclusions Through this study, the author was able to identify the characteristics of the developed pediatric CPGs that include CAM-i. More preceding studies are needed for the development of pediatric KMCPGs. It is hoped that this report can be used as the foundation for future development of pediatric KMCPGs.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1987년도 한국자동제어학술회의논문집; 한국과학기술대학, 충남; 16-17 Oct. 1987
• /
• pp.264-268
• /
• 1987

This paper is concerned on kinematic analysis and simulation of an automatic feeding mechanism subjected by the motion of a curvilinear inverse can. The curvilinear cam is rotated by positioning a translating roller and the automatic feeding mechanism is moved to the sliding position by the motion of a campin fixed on the curvilinear cam. The curvilinear cam consists of two arcs of circles and two straight lines. The modular approach is used for the kinematic analysis of the feeding mechanism. As the first part of the paper for the motion simulation of the cam-feeding system, this paper discusses the algorithm to simulate the motion of the cam-feeding mechanism. The second part of the paper presents the state-of-art for the graphics-oriented CAD technique,

• 대한심미치과학회지
• /
• 제25권2호
• /
• pp.109-126
• /
• 2016

CAD/CAM의 발전으로 기존의 많은 보철물이 지르코니아로 대체되고 있다. 하지만 많은 치과기공사가 지르코니아 색조재현에 많은 어려움을 겪고 있다. 시행착오를 겪으며 이에대한 해결을 위해 많이 노력하였고 이에 이 논문에서는 Ko's coloring 기법에 대해 설명하고자 한다.

• 한국정밀공학회지
• /
• 제19권8호
• /
• pp.47-54
• /
• 2002

A barrel cam is used as a very important part of an index drive unit. The index drive unit must have an intermittent-rotational motion. The barrel typed cam and roller gear mechanism has the advantages of high reliability to perform a prescribed motion of a follower. This paper proposes a new method for the shape design of the barrel cam and also a CAD program is developed by using the proposed method. As defined in this paper, the relative velocity method for the shape design calculates the relative velocity of the follower versus cam at a center of roller, and then determines a contact point by using the geometric relationships and the kinematic constraints, where the direction of the relative velocity must be parallel to a common tangential line at the contact point of two independent bodies, i.e. the cam and the follower Then, the shape of the cam is defined by the coordinate transformation of the trace of the contact points. This paper presents two examples for the shape design of the barrel cam in order to prove the accuracy of the proposed methods.