• Proceedings of the Korean Fiber Society Conference
• /
• 한국섬유공학회 1996년도 추계 학술발표회
• /
• pp.98-104
• /
• 1996

• Proceedings of the Korean Fiber Society Conference
• /
• 한국섬유공학회 1997년도 추계총회 및 학술발표회 논문집
• /
• pp.445-450
• /
• 1997

• Proceedings of the Korean Fiber Society Conference
• /
• 한국섬유공학회 1990년도 제2차 학술발표초록집
• /
• pp.9-11
• /
• 1990

• Clinics in Shoulder and Elbow
• /
• 제16권2호
• /
• pp.135-140
• /
• 2013

We report a case of recurrent shoulder dislocation and combined proximal humerus fracture in neurofibromatosis type I. A twenty-year-old male patient with known neurofibromatosis type I presented with right shoulder dislocation and proximal humerus fracture following a minor trauma. His injured arm also had large plexiform neurofibromas on the elbow, and the dislocation of the shoulder joint was proven to be recurrent. Bony deformation of the humerus and scapula were revealed on X-ray and computed tomography, as well as multiple neurofibromatic changes of the deltoid and periscapular muscles were noted on magnetic resonance imaging. Open reduction and capsular reconstruction were performed and humeral fracture was stabilized with a reconstruction plate. Satisfactory union and functional result were achieved and the dislocation did not recur until the 7-month followup after the procedure. Recurrent shoulder dislocation and combined proximal humerus fracture in neurofibromatosis type I are rare complications. However, it should still be considered in the orthopaedic evaluation process of the diseases.

• The magazine of the Korean Society for Advanced Composite Structures
• /
• 제1권3호
• /
• pp.11-16
• /
• 2010

• Communications of the Korean Institute of Information Scientists and Engineers
• /
• 제28권7호
• /
• pp.70-78
• /
• 2010

• Korean Journal of Materials Research
• /
• 제8권2호
• /
• pp.114-119
• /
• 1998

등방성 피치계 탄소섬유를 Co$_{2}$gas중에서 등온산화시켜 활성탄소섬유를 제조하였다. 산화된 섬유의 비표면적은 BET장치를 이용하여 측정하였다. Burn-off가 증가하여도 반응속도는 크게 감소하지 않았으며, 80$0^{\circ}C$와 90$0^{\circ}C$에서 산화된 섬유의 비표면적은 40%-60%의 burn-off에서 급격히 증가하다가 60%이상에서 감소하였다. 110$0^{\circ}C$에서 산화된 시편은 40%이상 burn-off되어도 비표면적은 크게 증가하지 않고 60%를 지나서도 계속해서 표면적이 증가하는 현상을 나타내었다. 100$0^{\circ}C$에서 60.4%의 burn-off가 일어난 산화섬유의 비표면적은 3,614$m^2$/g로 가장 큰 값이 얻어졌다. 등방성 탄소섬유는 미세한 흑연결정립들이 무질서한 배향을 하고 있으며, 미세기공벽으로 작용할 수 있는 결정립층이 많기 때문에 활성탄소섬유 제조를 위한 원료로 적합하다고 판단된다.

• Journal of the Korea Institute of Military Science and Technology
• /
• 제5권1호
• /
• pp.83-95
• /
• 2002

Thermal conductivity of ceramic fibrous insulator was analysed and predicted by using the modeling/simulation technique. Ceramic fibrous insulators are widely used as high temperature insulator on account of their lightweight mass and heat resisting properties. Especially it is suitable to protect the high speed aircraft and missiles from severe aero-thermodynamic heating. Thermal conductivity of ceramic fibrous insulator could be determined from the conductive heat transfer and the radiative heat transfer through the insulator. In order to estimate conductive thermal conductivity, homogenization technique was applied, while radiative thermal conductivity was computed by means of random number and radiation probability. Particularly radiation probability can make it possible to estimate the conductivity of fibrous insulator without any experimental constant. The calculated conductivity predicted in the present study have a reasonable accuracy with an average error of 7 percent to experimental data.

• Composites Research
• /
• 제31권5호
• /
• pp.177-185
• /
• 2018

Fiber metal laminate (FML) is a type of hybrid composites which consist of metallic and fiber-reinforced plastic sheets. As the FML has a drawback of the delamination that is a failure of the interfacial adhesive layer, the nominal stresses and the energy release rates should be determined to identify the delamination behavior. However, it is difficult to derive the nominal stresses and the energy release rates since the operating temperature of the equipment is restricted. For this reason, the objective of this paper is to predict the mode-I nominal stress and the mode-I energy release rate of the adhesive layer using the inverse analysis based on the Levenberg-Marquardt method. First, the mode-I nominal stress was assumed as the tensile strength of the adhesive layer, and the mode-I energy release rate was obtained from the double cantilever beam test. Next, the finite element method was applied to predict the mode-I delamination behavior. Finally, the mode-I nominal stress and the mode-I energy release rate were predicted by the inverse analysis. In addition, the convergence of the parameters was validated by trying to input two cases of the initial parameters. Consequently, it is noted that the inverse analysis can predict the mode-I delamination behavior, and the two input parameters were converged to similar values.

• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 한국염색가공학회 2012년도 제46차 학술발표회
• /
• pp.83-83
• /
• 2012

면섬유는 강우량, 일조량, 온습도, 영양분 등의 성장환경조건과 유전인자 및 추수방법에 따라서 섬유길이, 단면구조, 꼬임, 성숙도 등이 다양하게 변화한다. 면섬유에는 pectin, cotton wax, 지방질, 단백질계 물질, 자연색소 및 무기질 등의 불순물을 약 5% 함유하고 있다. 이러한 물순물을 제거하여 처리액의 침투성 향상을 돕고, 백도를 증진시키기 위해 전처리를 한다. 본 연구에서는 산지별로 생산되는 원면의 특성을 알아보기 위해 중국, 인도, 인도네시아, 파키스탄에서 원면을 각각 수입한 후 동일한 조건으로 편직하였다. 4개국 원면의 꼬임과 단면형태를 관찰하고, 불순물의 함량을 알아보았으며, 정련과 표백처리를 농도별로 진행하여 전처리조건이 염색성에 미치는 영향을 알아보았다. 정련 및 표백조건을 20% 씩 증가시켜가며 전처리를 하였고 농도별로 전처리된 시료를 Yellow 색상의 반응성 염료 0.005% (owf)로 염색한 후 자동컬러측색장치(CCM)를 사용하여 색차, Yellow Index(Y.I.), White Index(W.I.)를 비교분석하였다. 결과를 보면 인도산 원면이 다른 원면에 비해 Y.I.와 W.I.에서 다소 차이를 보였고, 염색현장과 조제업체에서 제시한 표준 전처리조건을 참고로 하였을 때, 표준 전처리조건 대비 0 ~ 40% 농도까지는 색상차이가 크게 나타나지만 60% 농도 이상에서는 색상차이가 크지 않았다. 이 결과로부터 산지별 원면의 전처리시 최소한의 조제투입량으로 최적의 전처리효과를 볼 수 있는 전처리공정조건을 설정할 수 있었고, 이로써 원가절감 및 오폐수감소 등의 효과를 기대할 수 있다.