• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2004년도 제22회 춘계학술대회논문집
• /
• pp.713-721
• /
• 2004

Variable air intake and variable exhaust nozzle of hypersonic engines are designed and tested in this study. Dimensions for variable geometry air intake, ram combustor and variable geometry exhaust nozzle are defined based on the requirements of a pre-cooled turbojet engine. Hypersonic Ramjet Engine is designed as a scaled test bed for each component. Actuation forces of moving parts for variable intake and variable nozzle are reduced by balancing the other force in the opposite direction. A demonstrator engine which includes variable intake and variable nozzle is designed and the components are fabricated. Composite material with silicone carbide is applied for high temperature parts under oxidation environment such as leading edge of the variable intake and combustor liner. Internal cooling structure is adopted for both moving and static parts of the variable nozzle. Pressure recovery and mass capture ratio of the variable intake at Mach 5 is obtained by a hypersonic wind tunnel test. Flow characteristics of the variable nozzle are obtained by a low temperature flow test. Wall temperature and heat flux of the nozzle at Mach 3 is obtained by a firing test. As results, the intake and the nozzle are proved to be used at designed pressure and temperature environment.

• 한국전산유체공학회지
• /
• 제5권2호
• /
• pp.47-54
• /
• 2000

A robust Navier-Stokes code has been developed to efficiently predict hypersonic flows in chemical nonequilibrium. The HLLE+ flux discretization scheme is used to improve accuracy and robustness of hypersonic flow analysis. An efficient LU approximate factorization method is also used to solve the flow equations and species continuity equations in fully coupled fashion to implicitly treat stiff source terms of chemical reactions. The HLLE+ scheme shows lower grid dependency for the wall heating rates than other schemes. The developed code has been used to compute chemical nonequilibrium air flow through expanding hypersonic nozzle and past two and three dimensional blunt-nosed bodies. The results are in good agreement with existing numerical and experimental results.

• Advances in aircraft and spacecraft science
• /
• 제2권2호
• /
• pp.183-198
• /
• 2015

Scramjets are a class of hypersonic airbreathing engine that are associated with realizing the technology required for economical, reliable access-to-space and high-speed atmospheric transport. After-burning augments the thrust produced by the scramjet nozzle and creates a more robust nozzle design. This paper presents a numerical study of three parameters and the effect that they have on thrust augmentation. These parameters include the injection pressure, injection angle and streamwise injection position. It is shown that significant levels of thrust augmentation are produced based upon contributions from increased pressure, mass flow and energy in the nozzle. Further understanding of the phenomenon by which thrust augmentation is being produced is provided in the form of a force contribution breakdown, analysis of the nozzle flowfields and finally the analysis of the surface pressure and shear stress distributions acting upon the nozzle wall.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2008년 영문 학술대회
• /
• pp.492-498
• /
• 2008

In this paper are described recent studies about variable nozzles, that are a rectangular type nozzle and an axisymmetric type nozzle, of the precooled turbojet engine(S-engine) which are developed for the demonstration of the key technologies for the propulsion system of the hypersonic airplane and the first stage propulsion of the TSTO space plane. For the rectangular nozzle, three types of C-shaped carbon/carbon composite cowls which includes subscale model of the precooled turbojet engine are fabricated and the fine attachment to the ramp is confirmed. For the firing of the S-engine, stainless steel cowl with concrete heat insulator are fabricated and tested for 20 sec. Axisymmetric variable plug nozzle which is made of C/C material is fabricated and pressurized by the cold flow test. The axisymmetric plug nozzle can be operative up to 0.57 MPa of nozzle inlet pressure.

• International Journal of Aerospace System Engineering
• /
• 제2권2호
• /
• pp.62-66
• /
• 2015

The starting processes of the Ludwieg tube hypersonic quiet tunnel plays very important role in the achievement of the quiet flow in the test section, which could affect the confidence coefficient of the data in the hypersonic transition experimental investigations. Thus, numerical analysis on that processes could help to understanding the running mode of the Ludwieg tube quiet tunnel and the propagation principle of the expansion wave series. To verify our computational method, the same parameter of the BAM6QT (the Boeing/AFOSR Mach-6 quiet tunnel at Purdue University) is used to compute, and it is agrees with our computational results.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2017년도 제48회 춘계학술대회논문집
• /
• pp.632-636
• /
• 2017

본 연구에서는 극초음속 추진기관을 위한 고공 환경 모사 시험 장치를 설계하였다. 설계된 사항을 기반으로 시험설비를 구축하였고, 상온 시험을 이용한 실험을 진행하였다. 상온 시험은 시험 모델의 유/무에 따라서 수행하였고, 본 연구에서 설계된 설비는 시험 모델의 유/무에 따라서 압력의 큰 변화가 없이 동일한 구현 조건을 모사하는 것을 확인할 수 있었다. 향후 시험 모델에 따른 변수 실험에 일부 적용될 데이터베이스를 확보하였다.

• 한국군사과학기술학회지
• /
• 제4권2호
• /
• pp.202-214
• /
• 2001

In this paper the upwind flux difference splitting Navier-Stokes method has been applied to study quasi one-dimensional nozzle flow and axisymmetric sphere-cone($5^{\circ}$) flow for the perfect gas, the equilibrium and the nonequilibrium chemically reacting hypersonic flow. The effective gamma(${ \tilde{\gamma}}$), enthalpy to internal energy ratio was used to couple chemistry with the fluid mechanics for equilibrium chemically reacting air. The influences of the various altitude(30km, 50km) at Mach number(15.0, 20.0) were investigated. The equilibrium shock position was located farthest downstream when compared with those of perfect gas in a quasi one-dimensional nozzle. The equilibrium shock thickness over the blunt body region was much thinner than that of perfect gas shock.

• 한국추진공학회지
• /
• 제5권1호
• /
• pp.10-17
• /
• 2001

본 논문에는 러시아 중앙엔진연구소의 스크램젯 시험 설비의 공력 특성이 제시되었다. 본 논문에서 시험 설비 노즐 출구의 온도와 마하 분포는 마하 6의 비행 조건을 시뮬레이션하여 얻어진 것이다. 시험 설비 작동 범위에 스크램젯 모델을 설치한 조건에서 노즐 입구로 공기를 가열하지 않은 조건과 가열한 조건에서 분사함으로써 다양한 작동 모드의 유효 압력 차와 조절 특성을 얻었다.

• 한국항공우주학회지
• /
• 제42권12호
• /
• pp.1028-1036
• /
• 2014

연구에서는 MOC 및 CFD를 이용한 극초음속 노즐 설계 절차를 수립하였다. MOC를 이용하여 설계된 비점성 노즐 형상에 대하여, 점성 유체 전산 해석을 통하여 경계층 두께를 산출하여 노즐 형상을 보정하였다. 여러 가지의 경계층 두께 정의를 비교한 결과, 노즐 단면 최대 속력의 95% 속력을 가지는 경계층 두께의 정의가 설계 마하수를 가장 잘 만족하는 것으로 여겨진다. 노즐 설계과정은 MOC 설계에 대한 격자 형성, 비점성 해석 및 점성 해석, 경계층 보정 및 점성 해석에 의한 확인 및 결과 도출의 순서로 진행되며, 모든 과정은 자동 일괄 처리토록 작성되었다.

• 항공우주시스템공학회지
• /
• 제7권3호
• /
• pp.7-14
• /
• 2013

Hypersonic vehicles over Mach 5 need active cooling or thermal management systems to resolve excessive heating problems on their fuselage and engines. Endothermic fuels are widely used these days not only for the energy source but also for a heat sink. Therefore, fuel supply systems of hypersonic vehicles should be mainly composed of adiabatic fuel storage tank, cooling systems for the airframe and engine/nozzle, and fuel supply/injection systems in high pressure, high temperature, and high fuel flow rate conditions. This paper describes a conceptual design process of a hypersonic fuel supply system in order for designing a layout of the system, and identifying components and their specification requirements.