• Korean Journal of Crystallography
• /
• v.12 no.4
• /
• pp.216-221
• /
• 2001

Artificial stone plates were hydrothermally prepared in order to utilize the stone powder sludge which were generated from stone quarry . Calcium hydroxide and silica were added to sludge of which main phases were quartz and alumina, and the effect of vapour pressure, reaction time and added amount on the properties of plates were investigated. The compressive strength, water absorp-tion and apparent specific gravity of the plates, which were prepared from the mixture of 70% stone sludge, 20% calcium hydroxide and 10% silica for 3 hours at the conditions of pressing pressure of 200kg/㎠ and vapour pressure of 20 kg/㎠, were 614kg/㎠, 0.48%, 1.88 respectively. It was also possible to produce various colours and appearances by adding inorganic pigments.

• Journal of the Korean Magnetics Society
• /
• v.6 no.4
• /
• pp.225-234
• /
• 1996

Needle-like $\alpha-Fe_{2}O_{3}$ particles as precursor for magnetic recording media were prepared directly from amorphous ferric hydroxide in the aqueous solution by hydrothermal reaction. Ellipsoidal or rectangular $\alpha-Fe_{2}O_{3}$ particles were formed in the range of pH 10.75~11.75. The length and acicularity of $\alpha-Fe_{2}O_{3}$ particles were decreased gradually with increasing of citric acid concentration. The formation of needle-like $\alpha-Fe_{2}O_{3}$ particles was inhibited above citric acid concentration of $1.5{\times}10^{-4}\;mol$. We can synthesize $\alpha-Fe_{2}O_{3}$ particles with the most superior acicularity at $140^{\circ}C$ and can not expect a good needle-like particles above $220^{\circ}C$.

• Journal of the Korean Ceramic Society
• /
• v.45 no.3
• /
• pp.185-189
• /
• 2008

In order to fabricate porous ceramics, hydrated sodium silicate was synthesized by hydrothermal reaction using anhydrous sodium silicate. The microstructural and the structural characteristics of the expanded ceramics were observed depending on heat treatment temperature (550, 600, 650, $700^{\circ}C$) and then the effect of these characteristics on the compressive strength and the temperature gradient was investigated. As the heat treatment temperature was increased, the compressive strength was decreased from $0.717KN/cm^2\;(550^{\circ}C)\;to\;0.166KN/cm^2\;(700^{\circ}C)$. The temperature gradient was increased with increasing the experimental temperature regardless of the heat treatment temperature. The temperature gradient of the expanded ceramics which was heat treated at $650^{\circ}C\;was\;300^{\circ}C$. The bulk specific gravity, porosity, pore size, pore characteristics and wall thickness were varied depending on heat treatment temperature, and the compressive strength and the temperature gradient were governed by the complex effects of these factors.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.08a
• /
• pp.200-200
• /
• 2011

Hierarchical mesoporous ZSM-5 with enhanced mesoporosity was synthesized by microwave through the rapid assembly via ionic interaction between sulfonic acid functionalized ZSM-5 nano particles and cationic surfactant. The catalytic performance of enhanced accessibility due to mesoporosity and acidity were investigated in the alkylation of mesitylene with benzyl alcohol as alkylating agent. The effect of mole ratio of aromatic with benzyl alcohol, reaction time and alkylation agent were also studied. The enhanced mesoporosity and acidity of sulfonic acid functionalized mesoporous ZSM-5 induced activity enhancement compared with non-functionalized mesoporous ZSM-5, sulfonic functionalized mesoporous ZSM-5 synthesized by hydrothermal method and conventional microporous ZSM-5. The sulfonic acid functionalized mesoporous ZSM-5 showed much higher chemoselectivity of benzylated mesitylene than others, whereas the others mainly show dibenzyl ether as product. This significant difference in catalytic selectivity was resulted from the existence of mesopores, which definitely allowed the benzylation in mesopores.

• Economic and Environmental Geology
• /
• v.30 no.4
• /
• pp.379-393
• /
• 1997

Geology of the Zbezkazgan copper deposit in Kazhkstan is mainly composed of Permian and Carboniferous sedimenary rocks in which copper minerals are mainly contained in grey sandstone of Carboniferous age. There are 28 layers of copper ore bodies in Zbezkazgan suite. Thickness of the ore bodies ranges from one to 35 meters, grade of the crude ore ranges from 2 to 5 wt % Cu and the extension of the orebodies is 5 to 7 km. Microscopic study on specimens from the Zbezkazgan ore deposit has exposed clues to understand the origin of this deposit. Alternatively deposited grey sandstone and red sandstone are mainly composed of quartz and feldspar grains. A big difference between the grey sandstone and the red sandstone is in grain size, the former is larger than the latter. Chalcocites as main copper minerals have cemented through grain boundary. It is assumed that quartz, feldspar and copper were derived from granitoid in which copper mineralization had taken place before exposing to weathering. The chalcocites were precipitated by a sudden change of geochemical condition (Eh, pH, temperature, etc.) of fluid which had carried quartz, feldspars, copper ions and sulphate during formation of grey sandstones. The copper ions and sulphate were stable in fluid during sedimentation of oxidation environment, however, the copper ions were no more stable at the reduced environment and changed to stable forms to precipitate copper minerals by reaction of copper ions and hydrogen sulfides. This chemical precipitation of copper minerals in the sandstone attributes to the assumption of hydrothermal origin on this sedimentary origined deposit.

• Applied Chemistry for Engineering
• /
• v.27 no.6
• /
• pp.669-671
• /
• 2016

Hydroxyapatite (HAP) was prepared by a hydrothermal synthesis method and also silver was introduced on the surface of HAP through an ion exchange reaction. The crystal phase and morphology of HAP were then evaluated by X-ray diffraction (XRD) and transmission electron microscopy (TEM). In addition, the absorption property of HAP was characterized by diffuse reflectance UV-Vis spectroscopy. The presence of silver nanoparticles on the surface of HAP was also verified by XRD and TEM analysis. Particularly, the silver doped HAP showed an enhanced absorption property in UV-Vis region compared to that of the pristine HAP.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2007.04a
• /
• pp.75-78
• /
• 2007

The recycling program about waste concrete is being progressed to national research. But research on waste concrete powder which is occurred in control process of concrete powder is not enough. Waste concrete powder includes in $SiO_2,\;Al_2O_3$, and CaO so that the create of tobermorite is possibile through Hydrothermal Syntesis Reaction. Tobermorite have an advantage of high strength, sulphuric acid resistance and the lower drying shrinkage. Accordingly, this study investigate in properties of light-weight foamed concrete made with waste concrete powder. As a results, light-weight foamed concrete made with waste concrete powder is the higher than stone powder sludge of density and porosity, and the tower compressive strength. Therefore, it is thought that light-weight foamed concrete using waste concrete powder is possible.

• Bulletin of the Korean Chemical Society
• /
• v.34 no.11
• /
• pp.3357-3361
• /
• 2013

Alumina microfibers with porous structures were prepared through hydrothermal reaction, and then used to modify the surface of carbon paste electrode (CPE). After modification with alumina microfibers, the electrochemical activity of CPE was found to be greatly improved. On the surface of alumina microfibers-modified CPE, the oxidation peak current of salvianolic acid B, a main bioactive compound in Danshen with anti-oxidative and anti-inflammatory effects, was remarkably increased compared with that on the bare CPE surface. The influences of pH value, amount of alumina microfibers and accumulation time were studied. Based on the strong signal amplification effects of alumina microfibers, a novel electrochemical method was developed for the detection of salvianolic acid B. The linear range was from 5 ${\mu}gL^{-1}$ to 0.3 mg $L^{-1}$, and the detection limit was 2 ${\mu}gL^{-1}$ (2.78 nM) after 1-min accumulation. The new method was successfully used to detect salvianolic acid B in ShuangDan oral liquid samples, and the recovery was over the range from 97.4% to 102.9%.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2012.05a
• /
• pp.51-51
• /
• 2012

There is a growing interest in innovative chemical synthesis in microreactors owing to high efficiency, selectivity, and yield. In microfluidic systems, the low-volume spatial and temporal control of reactants and products offers a novel method for chemical manipulation and product generation. Glass, silicon, poly(dimethylsiloxane) (PDMS), and plastics have been used for the fabrication of miniaturized devices. However, these materials are not the best due to either of low chemical durability or expensive fabrication costs. In our group, we have recently addressed the demand for economical resistant materials that can be used for easy fabrication of microfluidic systems with reliable durability. We have suggested the use of various specialty polymers such as silicon-based inorganic polymers and fluoropolymer, flexible polyimide (PI) films that have not been used for microfluidic devices, although they have been used for other areas. And inexpensive lithography techniques were used to fabricate Lab-on-a-Chip type of microreactors with differently devised microchannel design. These microreactors were demonstrated for various synthetic reactions: liquid, liquid-gas organic chemical reactions in heterogeneous catalytic processes, syntheses of polymer and non-trivial inorganic materials. The microreactors were inert, and withstand even harsh conditions, including hydrothermal reaction. In addition, various built-in microstructures inside the microchannels, for example Pd decorated peptide nanowires, definitely enhance the uniqueness and performance of microreactors. These user-friendly Lab-on-a-Chip devices are useful alternatives for chemist and chemical engineer to conventional chemical tools such as glass.

• Korean Journal of Materials Research
• /
• v.25 no.6
• /
• pp.300-304
• /
• 2015

Nanorod ZnO and spherical nano ZnO for gas sensors were prepared by hydrothermal reaction method and hydrazine method, respectively. The nano-ZnO gas sensors were fabricated by a screen printing method on alumina substrates. The gas sensing properties were investigated for hydrocarbon gas. The effects of Co concentration on the structural and morphological properties of the nano ZnO:Co were investigated by X-ray diffraction and scanning electron microscope (SEM), respectively. XRD patterns revealed that nanorod and spherical ZnO:Co with a wurtzite structure were grown with (100), (002), (101) peaks. The sensitivity of nanorod and spherical ZnO:Co sensors was measured for 5 ppm $CH_4$ and $CH_3CH_2CH_3$ gas at room temperature by comparing the resistance in air with that in target gases. The highest sensitivity to the $CH_4$ and $CH_3CH_2CH_3$ gas of spherical nano ZnO:Co sensors was observed at Co 6 wt%. The spherical nano ZnO:Co sensor exhibited a higher sensitivity to hydrocarbon gas than nanorod ZnO.