• 한국지열·수열에너지학회논문집
• /
• 제8권3호
• /
• pp.12-18
• /
• 2012

The purpose of this study is to make an economic analysis(Life cycle cost) of selecting optimal air conditioning system for a research building which is 8 stories with a total floor area of $32,010m^2$. Energy consumptions of three proposed air-conditioning systems(Alt-1,2,3) that reflect the government green-growth policy are calculated and compared. The results show that life cycle cost of Alt-3(Ventilation DX AHU+EHP) is less than Alt-1(EHP+ventilation DX AHU) by 5.1%, and Alt-2(Absorption chiller/heater+EHP) by 34.3%. Annual energy consumption of Alt-3 is less than Alt-1 by 9.9%, and Alt-2 by 37.4%. Annual $CO_2$ emission of Alt-3 is less than Alt-1 by 9.9%, and Alt-2 by 0.2%.

• Advances in materials Research
• /
• 제1권1호
• /
• pp.75-81
• /
• 2012

In this work, the Co-doped ZnO rods were prepared by the hydrothermal method. The size of these rods can be changed from micro-size to nano-size by using different solutions during the preparation. The results of transmission electron microscopy (TEM) and selected area electron diffraction (SAED) showed that the as-prepared nano-sized Co-doped rods have single-crystal structure. The polarized Raman experiments were presented on an individual micro-sized Co-doped ZnO rod in the $X(YY)\vec{X}$, $X(ZY)\vec{X}$ and $X(ZZ)\vec{X}$ configurations, the results of polarized Raman indicated that these rods are crystallized and their growth direction is parallel to c-axis.

• 전기학회논문지
• /
• 제67권6호
• /
• pp.753-758
• /
• 2018

We investigated annealing effects of seed layers on the properties of ZnO nanorods grown on the seed layers. ZnO nanorods were grown by a hydrothermal method. ~100 nm-thick ZnO films were sputtered on oxidized Si wafers and quartz as seed layers. The ZnO films were annealed at $400^{\circ}C$, $600^{\circ}C$, and $800^{\circ}C$, respectively. ZnO nanorods were grown at $90^{\circ}C$ for 3 hours in the mixed solution of zinc nitrate hexahydrate and hexamethylenetetramine. X-ray diffraction was carried out to estimate the crystallinity and strain of ZnO films and nanorods. A field emission scanning electron microscope was employed to observe the morphology of the films and nanorods. PL(photoluminescence) measurements were conducted with 266 nm light. It was found that the annealing of seed layers increase the growth rate of nanorods, and change compressive strain of nanorods to tensile strain. The intensity of PL in the UV region reduced by using the annealed seed layers.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2013년도 제45회 하계 정기학술대회 초록집
• /
• pp.203.2-203.2
• /
• 2013

Hydrothermally grown ZnO nanorods were synthesized with various Sn contents on quartz substrates, ranging from 0 to 2.5 at% in increment 0.5 at%. Scanning electron microscopy (SEM) and ultraviolet (UV)- visible spectroscopy were used to determine the effect of Sn doping on the structural and optical properties. In the SEM images, the nanorods have hexagonal wurzite structure and the diameter of the nanorods increase with increase in the Sn contents. The optical parameters of the Sn-doped ZnO nanorods such as the absorption coefficients, optical bandgaps, Urbach energies, refractive indices, dispersion parameters, dielectric constants, and optical conductivities were gained from the transmittance and reflectance results. In the PL spectra, the NBE peaks in the UV region decrease and blue-shift with increase in the Sn contents. In addition, the DLE peaks in the visible region of the nanorods shift toward low-energy region when the ZnO nanorods doped with various Sn contents.

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2007년도 춘계학술발표회 초록집
• /
• pp.147-148
• /
• 2007

In this study, the technology to grow oriented nanotube thin film from dip-coated $TiO_2$ using hydrothermal method has been successfully developed. The effects of preparation parameters, such as reaction temperature, duration and post treatment conditions on the film morphologies and the adherence to the substrate, have been examined. A general formation mechanism of oriented titanate nanotube thin film is proposed in terms of the detailed observation of the products via two dimensional surface FESEM studies and HRTEM images. The overall formation of $TiO_2-based$ nanotube thin film can be summarized with three successive steps: (1) $TiO_2$ dissolving and amorphous $Na_2TiO_3$ deposition process; (2) layered $Na_2Ti_3O_7$ formation via spontaneous crystallization and rapid growth process; (3) formation of nanotube thin film via $Na_2Ti_3O_7$ splitting and multilayer scrolling process of (100) planes around the c axis of $Na_2Ti_3O_7$.

• 한국전기전자재료학회논문지
• /
• 제36권2호
• /
• pp.175-185
• /
• 2023

A hybrid supercapacitor is a promising energy storage device in view of its excellent capacitive performance. Commercial three-dimensional foam nickel (Ni) can be used as an ideal framework due to an interconnected network structure. However, its application as an electrode material for supercapacitors is limited due to its low specific capacity. Herein, we report a successful growth of MnO₂ on the surface of graphene by a one-step hydrothermal method; thus, forming a three-dimensional MnO₂-graphene-Ni hybrid foam. Our results show that the mixed structure of MnO₂ with nanoflowers and nanorods grown on the graphene/Ni foam as a hybrid electrode delivers the maximum specific capacitance of 193 F·g^-1 at a current density 0.1 A·g^-1. More importantly, the hybrid electrode retains 104% of its initial capacitance after 1,000 charge-discharge cycles at 1 A·g^-1; thus, showing the potential application as a stable supercapacitor electrode.

• 한국결정성장학회지
• /
• 제14권3호
• /
• pp.83-89
• /
• 2004

본 연구에서는 우수한 생체적합성과 높은 기계적 성질을 갖는 아파타이트 생체세라믹스를 제조하기 위하여 수산화아파타이트(HA, $Ca_{10}(PO_4)_6(OH)_2/TiO_2$ 생체복합분말을 제조하였다. HA/$TiO_2$ 생체복합분말은 침전법과 졸겔법으로 각각 제조된 $TiO_2$ 분말과 수열합성법으로 제조된 HA 분말을 1:1의 무게분율로 혼합하여 제조하였다. HA/$TiO_2$ 생체복합분말은 $TiO_2$와 HA 입자의 크기와 모양에 따라 미세구조의 차이를 나타냈으며, $TiO_2$와 HA의 입자 크기가 서로 다른 복합분말의 경우, 작은 입자는 큰 입자의 표면에 둘러싸고 있었으나, $TiO_2$와 HA의 입자 크기가 비슷한 복합분말의 경우, $TiO_2$와 HA 입자가 서로 분산되어 균일한 미세구조를 가지고 있었다 균질한 미세구조를 갖는 복합분말은 소결체 제조 시 높은-소결밀도와 우수한 기계적 특성을 나타내었다.

• 한국결정성장학회지
• /
• 제17권6호
• /
• pp.238-244
• /
• 2007

수열합성법으로 합성 제조한 TMA-A 제올라이트 내부에 이온교환법을 이용하여 나노사이즈의 ZnO 결정을 성공적으로 담지하였다. TMA-A 제올라이트의 최적 합성 조성비로는 $Al(i-pro)_3$:2.2 TEOS:2.4 TMAOH:0.3 NaOH:200 $H_2O$으로 된 용액이었다. ZnO를 담지시킨 TMA-A 제올라이트의 합성을 위하여 0.3g의 TMA-A 제올라이트와 5mol의 $ZnCl_2$ solution을 사용하였다. 각각의 시료를 혼합, 교반, 원심분리, 건조의 과정을 거쳐서 준비한 ZnO를 담지시킨 TMA-A 제올라이트 precursor를 $400{\sim}600^{\circ}C$에서 3시간 동안 열처리하였다. TMA-A 제올라이트의 결정화 과정을 X-ray diffraction (XRD)을 이용하여 분석하였으며, Brunaur-Emett-Teller(BET) 비표면적을 측정하였다. 또한, 온도와 시간에 따른 입자의 형상이나 크기를 scanning electron microscopy(SEM), transmission electron microscopy(TEM) 및 입도분석을 통하여 관찰하였다.

• 한국결정성장학회지
• /
• 제8권1호
• /
• pp.55-63
• /
• 1998

조성이 각각 1.9 $SiO_2-1.5\;Na_2O-Al_2O_3-40\;H_2O$인 반응물과 10 $SiO_2-7\;Na_2O-Al_2O_3-280\;H_2O$인 반응물로부터 다공성 지지판에 성장된 A형 및 Y형 제올라이트 결정박막을 합성하였다. 합성된 제올라이트 막은 X선회절분석기와 주사전자현미경으로 특성을 검토하였다. 지지체 상에 붙어 성장한 A 및 Y형 제올라이트 결정은 치밀하게 서로 붙은 상태였으며 그 두께가 약 8-15$\mu$m 정도였다. 또한 반응물을 조제할 때, 물은 첨가하지 않은 채로 혼합하고 디스크형으로 가압성형하여 $100^{\circ}C$에서 결정화시켜도 치밀하게 성장된 제올라이트 결정박막을 합성할 수 있었다. 박막으로 결정화시킨 A형 제올라이트는 미세세공의 분자체기능을 통하여 물과 메탄올의 혼합수용액에서 물만을 선택적으로 투과시키는 것을 알 수 있었다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2014년도 제46회 동계 정기학술대회 초록집
• /
• pp.429.2-429.2
• /
• 2014

ZnO nanowire is known as synthesizable and good mechanical properties. And, stimuli-responsive polymer is widely used in the application of tunable sensing device. So, we combined these characteristics to make precise tunable sensing devise. In this work, we investigate the dependence of ZnO nanowire alignment and morphology on si substrate using nanosphere template with various conditions via hydrothermal process. Also, pH-temperature dependant tuning ability of nanostructure was studied. The brief experimental scheme is as follow. First, Zno seed layer was coated on a si wafer ($20{\times}20mm$) by spin coater. And then $1.15{\mu}m$ sized close-packed PS nanospheres were formed on a cleaned si substrate by using gas-liquid-solid interfacial self-assembly method. After that, zinc oxide nanowires were synthesized using hydrothermal method. Before the wire growth, to specify the growth site, heat treatment was performed. Finally, NIPAM(N-Isopropylacrylamide) was coated onto as-fabricated nanostructure and irradiated by UV light to form the PNIPAM network. The morphology, structures and optical properties are investigated by FE-SEM(Field Emission Scanning electron Microscopy), XRD(X-ray diffraction), OM(Optical microscopy), and WCA(water contact angle).