• 제목/요약/키워드: Hydrotest

검색결과 6건 처리시간 0.016초

Sabkha층의 Hydrotest 시 입자파쇄 거동분석 (Behavior Analysis of Particle Crushing about Sabkha Layer under Hydrotest)

  • 김석주;한희수
    • 한국지반환경공학회 논문집
    • /
    • 제14권9호
    • /
    • pp.57-65
    • /
    • 2013
  • 탄산질 모래는 낮은 구속압에서도 입자파쇄가 발생하며 이로 인해 높은 압축성을 나타내기 때문에 입자파쇄가 강도 및 변형특성에 중요한 영향을 미친다. 본 논문은 탄산질 모래로 구성된 Sabkha층에 Tank 설치를 위하여 시험성토 및 Hydrotest를 수행한 후 지반의 침하거동을 비교 분석한 것이다. 현장 Sabkha층 시료는 압밀시험결과 80~170kPa에서 입자파쇄가 발생하였고, 화학조성을 분석한 결과 석영질 모래에서 검출되지 않은 칼슘성분이 다량 검출되어 입자파쇄가 잘 일어날 수 있음을 알 수 있었다. 입자파쇄가 발생하지 않은 시험성토에서는 성토완료 이틀만에 간극수의 소산과 침하가 완료되었으나 입자파쇄응력보다 큰 200kPa의 하중이 재하된 Hydrotest에서는 충수 후 장기침하거동이 발생하여 시험성토의 침하거동과는 상이한 결과를 나타내었다. 따라서 현장 Sabkha층에 입자파쇄하중 이상의 하중이 재하될 경우 입자파쇄로 인한 즉시침하와 파쇄된 입자의 재배열로 인한 이차압축침하가 발생됨을 알 수 있었다.

AE에 의한 압력용기의 안전성평가에 관한 연구 (A Study on the Monitoring of Pressure Vessel Safety during Hydrotest by Acoustic Emission)

  • 이주석;조경식;최진민;장홍근;오세규
    • 비파괴검사학회지
    • /
    • 제8권1호
    • /
    • pp.12-21
    • /
    • 1988
  • The behaviour of pressure vessel made of SS41 steel was investigated during hydrotest. AE tests were carried out for the vessels in as-manufactured, V-notched and weld-cracked state using microcomputer-based AE instrumentation. The following results were obtained: 1) In the case of source location using cylindrical program, to minimize the error of source location, the difference of max. Delta T values measured from each sensor should be kept as small as possible. 2) When crack grew, AE event rate increased continuously but AE event from the inclusions occurred intermittently, so by analyzing event rate, the source of AE could be derived. 3) From the spot welding part of supporter, many events with low energy occurred independent of Kaiser effect, which could be confirmed by analyzing energy parameter. 4) The b-value from the tensile specimen of was lower than that from normal specimen and the b-value from crack propagation was lower than that from deformation, so by analyzing peak amplitude distribution, the source mechanism could be derived from the b-value.

  • PDF

최신 DnV 규정에 의한 해저 파이프라인의 자유 경간 해석 (Developments of Free Span Analysis of Offshore Pipelines by New DnV Code)

  • Kim, Bum-Suk;Lee, Jong-Hyun;Park, Han-Suk
    • 한국해양공학회:학술대회논문집
    • /
    • 한국해양공학회 2001년도 추계학술대회 논문집
    • /
    • pp.68-72
    • /
    • 2001
  • Two different methods of free span analysis of offshore pipelines by DnV codes were introduced and compared in order to calculate the allowable free span lengths of the offshore pipelines. The allowable span lengths of the offshore pipelines for installation, hydrotest and operation conditions by static and dynamic span analysis were determined. Static analysis was performed by ASME codes and dynamic span analysis was performed by both 1981 DnV code. Comparison of two codes were carried out. A new design procedure to calculate the allowable span lengths was developed with new DnV code.

  • PDF

RSEM 규격에 따른 중국 광동 원전 상온수압시험시의 음향방출 누설시험 및 누설 육안검사 (Acoustic Leak Detection and Visual Examination during Hydrotest of Guangdong Nuclear Power Plants by RSEM Code)

  • 주영상;이종포
    • 비파괴검사학회지
    • /
    • 제14권1호
    • /
    • pp.39-47
    • /
    • 1994
  • 원자력발전소의 상온수압시험에는 여러가지 목적이 있으며 그 중에서 가장 중요한 것 중 하나는 원전 주요 기기로부터의 누설여부를 알아내는 것이다. 동 시험에서 누설 여부를 알아내기 위해 현재 국내에서는 미국 규격에 따라 육안검사를 수행하고 있으나 프랑스의 경우, 음향방출 누설시험과 육안검사를 수행토록 하고 있다. 저자는 1992년과 1993년 중국 광동 원전 1, 2호기의 가동전검사에 참여하여 프랑스의 RSEM 규격에 따라 실시된 상온수압시험시의 음향방출 누설시험과 누설 육안검사에 대하여 기술 지원 업무를 수행하였다. 동시험에서는 시험 최고 압력인 228bar에서는 음향방출 누설 감시시험과 누설 육안검사를, 감압단계인 155bar 에서는 누설 육안검사를 수행하였다. 본고에서는 동 규격에 따라 최초로 수행된 중국 광동 원전 가동전검사 수압시험시의 음향방출에 의한 누설감시와 누설 육안검사에 대해 검사 기술, 검사 방법, 검사 절차, 그리고 검사 대상부위 등을 기술하였다.

  • PDF

수압시험중(水壓試驗中)의 구행압력용기(球型壓力容器)에 대(對)한 AE검사(檢査) (ACOUSTIC EMISSION TESTING OF SPHERICAL PRESSURE VESSEL DURING HYDROTESTS)

  • 장홍근;이주석;조경식
    • 비파괴검사학회지
    • /
    • 제3권1호
    • /
    • pp.12-18
    • /
    • 1983
  • This paper describes the procedures and results of an acoustic emission testing performed during hydrotest of spherical pressure vessel for propane storage. A computer based multi-channel real time monitoring and source location analysis AET-4900 system was used for AE testing. The vessel was extremely quiet throughout the entire test run and especially 6 to $14.5kg/cm^{2}$, it is normal operating pressure range. After exceeding $14.5kg/cm^{2}$, one of the 20 sections showed the most event in any one section 11 total but there were scattered at different locations. In order to confirm the events seen in horizontal weld line of that section, proof testing was performed with ultrasonics and radiography.

  • PDF

Sabkha층 탄산질 모래의 침하특성 및 상부기초의 거동 (Settlement Characteristics of a Large-Scale Foundation over a Sabkha Layer Consisting of Carbonate Sand)

  • 김석주;한희수
    • 지질공학
    • /
    • 제23권3호
    • /
    • pp.247-256
    • /
    • 2013
  • 중동지역의 Sabkha층 탄산질 모래는 낮은 전단강도를 나타내며, 입자파쇄시 내부공극의 외부노출로 인한 즉시침하와 파쇄입자의 재배열로 인한 시간 의존적 이차침하가 발생된다. 현장 대형기초에 의한 Sabkha층의 침하특성을 분석하기 위하여 Hydrotest를 수행하였고, 실내시험 결과와 비교하였다. 삼축압축시험 결과 일차입자파쇄의 정도에 따라 Sabkha층 GL-1.5 m에서 Strain-hardening, GL-7.0 m에서 Strain-perfect, GL-7.5 m에서 Strain-softening 형태의 응력-변형 거동이 나타났다. 일반적으로 전반전단파괴는 입자가 조밀하고 지반의 강도가 큰 경우 발생하나 Sabkha층 탄산질 모래에서는 Strain-softening 거동 발생시 Strain-hardening과 Strain-perfect 거동에 비하여 오히려 입자파쇄 강도가 작아지는 현상이 발생하였다. 이러한 응력-변형 특성은 상대밀도 증가시 전단강도가 증가하는 석영질 모래의 특성과는 상이한 것이다. 현장 Hydrotest시 입자파쇄의 영향으로 간극수압 소산 후에도 지속적인 이차압축침하가 발생되었으며, 입자파쇄응력이 상대적으로 작고 Strain-softening 거동, 혹은 Strain-perfect 거동을 나타낸 하부 Sabkha층의 입자파쇄가 기초침하에 지배적인 영향을 미친 것으로 판단된다.