• 한국식품저장유통학회지
• /
• 제18권1호
• /
• pp.1-6
• /
• 2011

고추장굴비의 지방산패를 최소화하기 위하여 신선굴비를 동결건조한 굴비포를 사용하여 고추장굴비를 제조하고 비열처리 살균방법으로 초고압과 감마선 처리하여 저장 중에 품질과 미생물변화를 분석함으로서 고추장굴비의 저장과 유통기간 연장 가능성을 검토하였다. 초고압처리(200, 400, 600 MPa) 및 감마선 조사(7, 10, 20, 30 kGy) 후 pH 변화는 유의적으로 차이가 없었으며 20일 동안 상온에서 저장 중에도 시료간의 유의적인 변화를 보이지 않았다. 색도는 Hunter L값과 b값은 증가하는 경향을 보였으며 a값은 감소하는 경향을 보였으나 외관상 품질에 영향을 미칠 정도는 아니었다. 휘발성 염기질소 대조구와 처리구에서 저장 중 경시적으로 증가하는 현상을 보였으나 초고압처리 압력이 높을수록, 감마선 조사강도가 높을수록 유의적으로 현저히 낮은 증가율을 보였다. TBA값은 모든 시료에서 시간이 경과함에 따라 증가량의 차이는 있으나 증가하는 경향을 보였으며, 초고압 처리하지 않은 경우 초기 0.6 mg/g 수준에서 20일 저장 후 4.2 mg/g 수준으로 높은 증가율을 보였으며, 600 MPa 처리구와 30 KGy 처리구의 경우 각각 1.2mg/g과 1.5 mg/g 수준으로 현저하게 낮은 값을 보였다. 초고압처리에 의한 호기성 생균수 감소효과는 다소 낮은 편이었으며 10 kGy 이상의 방사선 조사에 의해 효과적으로 미생물 수를 감소시켰다. 특히 30 kGy 처리구의 경우 20일 동안 저장 후에도 검출되지 않아 멸균효과를 얻을 수 있었다. 고추장 굴비 대중화를 위해서 진공포장이 기본적으로 요구되며, 초고압처리 방법은 단기적인 유통기한 연장효과를 기대할 수 있으며 장기적인 효과를 위해서는 감마선 조사가 적합할 것으로 판단된다.

• 한국기계가공학회지
• /
• 제5권2호
• /
• pp.56-64
• /
• 2006

Rapid progress in many branches of technology has led to a demand on new materials such as high strength light weight alloys, powdered alloys and composite materials. The hydrostatic extrusion is essentially a method of extruding a clad rod through a die. In order to investigate the effect of the process conditions such as friction heat, deformation and clad thickness on the clad extrusion process, viscoplastic finite element simulations were conducted. A specific model for theoretical analysis used in this study is The single scalar variable version of Hart's model. An experiment also has been carried out using 1.5MN hydrostatic extruder with variable speed ram, LVDT and load cell for comparison. It is found that the hydrostatic extrusion pressure considering the effect of heat dissipation in this theoretical work was closer to the experimental pressure than the isothermal hydrostatic extrusion pressure.

• The International Journal of Costume Culture
• /
• 제4권3호
• /
• pp.241-248
• /
• 2001

Re water resistance of shell fabrics intended for we in outdoor apparel was measured using three different standard test methods, ASTM D 751, hydrostatic resistance, procedure A(Mullen test -- with and without a fabric support) and Procedure B (Hydrostatic head test). A database of information on their water resistance performance was created. The data collected with different methods were correlated and the advantages and disadvantages of each method were compared. The Mullen test with a support appears to give higher and more favorable water resistance values on shell fabrics preventing fabric rupture during the test. The hydrostatic head test gave lower hydrostatic pressure values than those measured on the two Mullen tests. The Mullen test is recommended for testing the water resistance of fabrics that high a relatively high water resistance because the Mullen tester applies a wide range of pressure. The hydrostatic head test is recommended for testing the fabrics that have relatively low water resistance. The area of the fabric sample that is in contact with the water is smaller in the Mullen test, so higher pressure levels can be reached and more samples should probably be tested to get a representative value for each fabric types. Furthermore, the hydrostatic head test was deemed more repeatable than the Mullen tests in his study.

• KSBB Journal
• /
• 제23권5호
• /
• pp.362-368
• /
• 2008

본고에서는 초고압 시스템 (High hydrostatic pressure (HHP))의 특성, 종류, 응용을 예로 들어 설명하였다. 초고압 기술은 식품의 살균, 식품 보존기간연장, 유효성분의 추출 등에 선택적으로 적합하게 적용하여 생물산업공정에 효율적으로 응용 할 수 있다. 초고압 시스템을 효율적으로 적용하기 위한 최적조건을 선정하는 것은 많은 조업 변수에 대한 고려를 해야 하는 힘든 작업이다. 따라서 하드웨어에 대한 기초 실험과 예비 생산을 통하여 공정에 대한 모사를 검증하고 생산 효율을 증가시킬 수 있다. 또한 초고압 시스템의 중요성이 증가함에 따라 고성능 및 사용이 더욱 편리한 시스템이 나타날 것이며, 많은 영역의 바이오산업에서 필수적으로 이용될 것이다.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 1998년도 추계학술대회 논문집
• /
• pp.222-227
• /
• 1998

The paper proposes a new method for measuring the flow ripple generated by an axial piston pump and motor in a hydrostatic transmission. The method is based on dynamic characteristics between pressure and flow ripple in the pipeline. Also, the self-checking functions develop for the evaluation of accuracy and dynamic response of estimated results by the method proposed here. The experiment carry out open circuit type hydrostatic transmission. By using the self-checking functions, the validity of the method is investigated by comparison with the measured and estimated flow and pressure ripples, and good agreement is achieved.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2003년도 추계학술대회논문집
• /
• pp.386-390
• /
• 2003

As a trial of application of hydrostatic pressure in micro fomring, burr-free punching has been conducted by means of hydro-mechanical procedure. Even though it is in beginning stage, result of the hydro-mechanical punching is promising. Hydrostatic pressure helps delay fracture initiation and makes it possible to get clean shearing surface. Without any burr on both side of sheet, smooth holes are archived as intended. To verify the significance of hydro-mechanical punching, conventional punching is performed under similar conditions and relatively larger portion of fracture surface is detected in the punching hole. Despite the quality of sidewall is not good enough, it might be possible to make the hole shaped upright, reduce the roll-over radius and minimize the fracture surface by optimizing process parameters.

• 한국압력기기공학회 논문집
• /
• 제8권1호
• /
• pp.19-24
• /
• 2012

This paper presents the results of finite element analysis for the effects of hydrostatic test and operating condition on the weld residual stress at dissimilar metal weld of a pressurizer safety nozzle in a nuclear power plant. For the study, the weld residual stress at ambient condition was analyzed using ABAQUS in the first place. After the weld residual stress analysis, the hydrostatic test condition and operating condition was applied to the same model one after another. The weld residual stress was observed to change due to the successive hydrostatic test and operating condition. The axial residual stresses on inner surface of the dissimilar metal weld and HAZ region were decreased by hydrostatic test and operating condition, which gives beneficial effect on preventing primary water stress corrosion cracking.

• 한국공작기계학회논문집
• /
• 제10권1호
• /
• pp.120-126
• /
• 2001

This study deals with a flow and pressure ripple characteristics for a hydrostatic transmission(HST) consisting of a vari-able axial piston pump connected in an open loop to a fixed displacement axial piston motor. These flow ripples produced by pump and motor in HST interacts with the source impedances of the pump or motor and dynamic characteristics of the connected pipeline, and results in a pressure ripples, Pressure ripples. Pressure ripples in HSP is major source of vibration, which can lead to fatigue failure of components and cause noise. In this paper, the flow ripples generated by a swash plate type axial piston pump or motor in HST are measured by making use of hydraulic pipeline dynamics and the measured pressure data at two points along the pipeline. By using the self-checking functions, the validity of the method us investigated by comparison with the measured and estimated pressure ripples at the halfway section of the pipeline, and good agreement is achieved.

• 한국공작기계학회논문집
• /
• 제11권3호
• /
• pp.33-38
• /
• 2002

This paper deals with pressure ripple attenuation far separated-type Hydrostatic Transmission (HST) consisting ova variable axial piston pump connected in an open loop to a fried displacement axial piston motor. Pressure ripples in HST is major source of vibration which can lead to fatigue failure of components and cause noise. In order to reduce the pressure ripple, an annular tube tripe hydraulic filter is proposed to attenuate pressure ripples with the high frequencies components to achieve better noise reduction in HST. The basic principle of a hydraulic filter is allied to propagation of pressure wave, reflection, absorption in cross section of discontinuity and resonance in the hydraulic pipeline. It is experimentally shown that the hydraulic filter attenuates about 30∼40dB of pressure ripple with high frequencies. These results will assist in modeling and design of noise reduction in hydraulic control systems, and provide a means of designing a quieter HST.

• 한국방재학회 논문집
• /
• 제10권1호
• /
• pp.103-109
• /
• 2010

본 연구에서는 자유수면 흐름에 적용할 수 있는 연직방향에 대해 좌표변환된 3차원 동수압 모형을 제시하였다. 제시한 모형은 자유수면과 동수압의 해석을 위하여, 2중 예측-수정(double predictor-corrector)방법을 적용하였다. 본 연구에서는 정확한 동역학적 경계조건(자유수면에서의 압력은 0인 조건)을 적용하는 방법을 검토하였고, 제시한 모형을 이용한 수치모의 결과를 해석해와 비교하여 본 연구에서 제시한 모형의 우수성을 검증하였다.