• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2003년도 춘계학술대회 논문집
• /
• pp.1382-1385
• /
• 2003

Deformation on shapes of the hydrogen absorption metal in this paper was investigated on hydrogen absorption-desorption cycling. In order to study this problem, the cold rolled palladium plate and the cold extrusion palladium bar as specimens had been used. By using the electrochemical method, the palladium specimens were cyclically hydrogenated in the 0.1 mol H$_2$SO$_4$ electrolyte. As results, it is noted that the thickness of the plate specimen gradually increased in increasing hydrogenation cycles whereas the width and the length decreased. But both the diameter and the length of the bar specimen increased with increasing hydrogenation cycles. Also, grains in the plate specimen were greatly deformed after hydrogenation cycling whereas internal grains in the bar specimen were pulverized. And deterioration of the hydrogen absorption rate of the bar specimen was lager than the plate specimen.

• 공업화학
• /
• 제28권3호
• /
• pp.326-331
• /
• 2017

캐스터오일은 수소화반응을 통해 계면활성제의 중간체 등 유용한 화학산업의 원료로 활용 가능하다. 본 연구에서는 캐스터오일의 수소화용 니켈촉매의 제조조건과 전처리 조건에 대한 영향을 연구하였다. 니켈촉매는 침전제와 pH를 다르게 하여 실리카 담체상에 침전법으로 담지되었고, 다시 산화와 환원의 반복된 전처리를 행하였다. 니켈촉매의 활성은 캐스터오일의 요오드 가를 측정하여 비교하였고, 니켈촉매의 분산도는 XRD, BET, TEM을 통하여 분석하였다. 니켈촉매의 활성을 CO산화반응실험을 통하여도 비교하였다. 산화와 환원 사이클의 반복에 의해 니켈의 재분산이 실리카 상에서 발생하였고, 이것이 캐스터오일 수소화반응 활성을 증진시키는데 기여하였다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2002년도 춘계학술대회 논문집
• /
• pp.861-864
• /
• 2002

Deformation of the specimen was investigated on hydrogen absorption-desorption cycling. In order to study this problem, the cold rolled palladium thin plate as the specimen had been used. By using the electrochemical method, the palladium plate specimen was cyclically hydrogenated in the 0.1 mol $H_2SO_4$ electrolyte. As results, it is noted that the thickness of the plate specimen gradually increased in increasing hydrogenation cycles whereas the width and the length decreased. Also, grains in the plate specimen were greatly deformed after hydrogenation cycling. But hydrogen absorption rate scarcely changed.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2002년도 추계학술대회 논문집
• /
• pp.829-832
• /
• 2002

Deformation of the specimens was investigated on hydrogen absorption-desorption cycling. In order to study this problem, the cold rolled and the annealed palladium thin plate as specimens had been used. By using the electrochemical method, the palladium plate specimens were cyclically hydrogenated in the 0.1mol $H_2SO_4$ electrolyte. As results, it is noted that the thickness of the plate specimens gradually increased in increasing hydrogenation cycles whereas the width and the length decreased. Also, Deformation of the cold rolled palladium specimen was lager than the annealed palladium specimen. And grains in the plate specimen were greatly deformed after hydrogenation cycling. But hydrogen absorption rate scarcely changed.

• 한국수소및신에너지학회논문집
• /
• 제2권1호
• /
• pp.29-37
• /
• 1990

The effect of pressure cycling of $Zr_{0.9}Ti_{0.1}Cr_{0.7}Fe_{1.3}$ on the hydrogenation properties was investigated using the P-C-Isotherm curves and hydrogen absorption rate curves in the isotherm condition. The reversible hydrogen absorption capacity was decreased about 45 % after 3300 cycles. In the case of activated sample, the rate controlling steps of hydriding reaction changed from the surface reaction to the hydrogen diffusion process through hydride phase sequentially as reaction proceeded. After 3300 cycles, the sequential change of rate controlling step was same as activated one. However, the hydrogen absorption rate significantly decreased. It is suggested that the degradation of $Zr_{0.9}Ti_{0.1}Cr_{0.7}Fe_{1.3}$ can be interpreted with the formation of $ZrFe_3$ phase at the particle surface.

• 한국수소및신에너지학회논문집
• /
• 제19권6호
• /
• pp.482-489
• /
• 2008

Ti-Cr alloys consist of BCC solid solution, C36, C14 and C15 Laves phase at high temperature. Among others, the BCC solid solution phase was reported to have a high hydrogen storage capacity. However, activation, wide range of hysteresis at hydrogenation/dehydrogenation, and degradation of hydrogen capacity due to hydriding/dehydriding cycles must be improved for its application. In this study, to improve such problems, we added a Nb. For attaining target materials, Ti-10Cr-xNb(x=1, 3, 5wt.%) specimens were prepared by arc melting. The arc melting process was carried out under argon atmosphere. As-received specimens were characterized using XRD(X-ray diffraction), SEM(Scanning Electron Microscopy) with EDX(Energy Dispersive X-ray) and TG/DSC(Thermo Gravimetric Analysis/Differential Scanning Calorimetry). In order to examine hydrogenation behavior, the PCI(pressure-Composition-Isotherm) was performed at 293, 323, 373 and 423K.

• 한국수소및신에너지학회논문집
• /
• 제9권3호
• /
• pp.111-118
• /
• 1998

The intrinsic degradation behavior of $(V_{0.53}Ti_{0.47})_{0.925}Fe_{0.075}$ alloy with BCC structure and the two plateau regions (the low and high plateau region) has been investigate during the temperature-induced hydrogen absorption-desorption cycling (thermal cycling). After 400 thermal cycles between room temperature and $600^{\circ}C$ under 10atm $H_2$, the total reversible hydrogen absorption capacity decreased by about 40%. From thermal desorption analysis it was found that the degradation behavior at each plateau region was different. In addition, XRD analysis showed that the crystal structure of the sample in de-hydrided state was changed from BCC to BCT after degradation, and that of the sample in hydrided state it was maintained as FCC although peaks were broadened after degradation. From the result of static isothermal hydrogenation treatment it were found that crystal structure change from BCC to BCT was caused by the thermal energy. TEM analysis showed that the peak broadening was due to the formation of an amorphous phase in FCC matrix.

• 전기화학회지
• /
• 제5권3호
• /
• pp.111-116
• /
• 2002

묽은 불산용액에서 Si(111) 산화막 (SiOx) 표면을 전기화학적으로 에칭할 때 생성되는 Si(111)-H 표면변화를 전기화학적 주사터널링현미경을 사용하여 조사하였다. pH가 4.7인 0.2M $NH_4F$ 용액에서 순환전압전류곡선은 순환 횟수가 증가할수록 양극 암전류가 감소하였고 두 번 이상 순환한 시료의 암전류는 일정한 형태의 전압전류곡선을 나타냈다. 이때 표면은 모든 SiOx층이 벗겨져 수소말단화된 구조를 가졌으며, 그 이후 순환에서는 생성된 Si(111)-H 표면의 이중 수소결합이 없어지는 step-flow반응이 일어나, 표면이 단일수소결합을 가지는 [112]모서리의 안정한 삼각형 모양을 나타냈으며 또한 생성된 삼각형 흠의 깊이가 점차 깊어졌다. 일정전압법에서는 초기에 큰 양극 암전류 최고 값을 나타낸 후, 시간에 따라 양극 암전류가 감소하였다. 양극 암전류 최고 값 후. 표면의 모든 SiOx가 벗겨졌으며 이후 양극 암전류는 작은 값을 띠면 조금씩 더 낮아졌다. 이 낮아지는 양극 암전류 역시 이중수소 결합의 step-How반응에 안정한 단일수소결합의 [112]모서리 생성에 의해 나타난다. pH 4.7인 0.2M $NH_4F$용액중의 Si(111)-H표면에 +0.4V를 가할 때 진행되는 에칭반응의 메커니즘에 관해서 논하였다.