• Proceedings of the Korean Nuclear Society Conference
• /
• 1999.10a
• /
• pp.260.1-260
• /
• 1999

• Transactions of the Korean hydrogen and new energy society
• /
• v.34 no.2
• /
• pp.169-177
• /
• 2023

Phase stability diagrams were constructed for magnesium alanate (Mg(AlH₄)₂) nanoparticles to investigate the reversible hydrogen storage reaction by using density functional theory. Our findings indicate that bulk Mg(AlH₄)₂ shows favorable hydrogen release, but unfavorable hydrogen uptake (adsorption) reactions. However, for Mg(AlH₄)₂ nanoparticles, it was observed that hydrogen release and recharge can be achieved by controlling the particle size and temperature. Furthermore, by predicting the decomposition phase diagram of Mg(AlH₄)₂ nanoparticles with varying hydrogen partial pressure, it was discovered that reversible dehydrogenation reactions can occur even in relatively large nanoparticles by controlling the hydrogen partial pressure.

• Transactions of the Korean hydrogen and new energy society
• /
• v.27 no.4
• /
• pp.349-356
• /
• 2016

Volumetric capacity metrics at cryogenic condition are critical for technological and commercial development. It must be calculated and reported in a uniform and consistent manner to allow comparisons among different materials. In this paper, we propose a simple and universal protocol for the determination of volumetric capacity of sorbent materials at cryogenic condition. Usually, the sample container volume containing porous sample at RT can be directly determined by a helium expansion test. At cryogenic temperatures, however, this direct helium expansion test results in inaccurate values of the sample container volume for microporous materials due to a significant helium adsorption, resulting significant errors in hydrogen uptake. For reducing this container volume error, therefore, we introduced and applied the indirect method such as 'volume correction using a non-porous material', showing a reliable cold volume correction.

• The Korean Journal of Physiology and Pharmacology
• /
• v.11 no.2
• /
• pp.71-77
• /
• 2007

Cisplatin treatment increases the excretion of inorganic phosphate in vivo. However, the mechanism by which cisplatin reduces phosphate uptake through renal proximal tubular cells has not yet been elucidated. We examined the effect of cisplatin on $Na^+$-dependent phosphate uptake in opossum kidney (OK) cells, an established proximal tubular cell line. Cells were exposed to cisplatin for an appropriate time period and phosphate uptake was measured using $[^{32}P]$-phosphate. Changes in the number of phosphate transporter in membranes were evaluated by kinetic analysis, $[^{14}C]$phosphonoformic acid binding, and Western blot analysis. Cisplatin inhibited phosphate uptake in a time- and dose-dependent manner, and also the $Na^+$-dependent uptake without altering $Na^+$-independent uptake. The cisplatin inhibition was not affected by the hydrogen peroxide scavenger catalase, but completely prevented by the hydroxyl radical scavenger dimethylthiourea. Antioxidants were ineffective in preventing the cisplatin-induced inhibition of phosphate uptake. Kinetic analysis indicated that cisplatin decreased Vmax of $Na^+$-dependent phosphate uptake without any change in the Km value. $Na^+$-dependent phosphonoformic acid binding was decreased by cisplatin treatment. Western blot analysis showed that cisplatin caused degradation of $Na^+$-dependent phosphate transporter protein. Taken together, these data suggest that cisplatin inhibits phosphate transport in renal proximal tubular cells through the reduction in the number of functional phosphate transport units. Such effects of cisplatin are mediated by production of hydroxyl radicals.

• Korean Journal of Human Ecology
• /
• v.9 no.3
• /
• pp.63-68
• /
• 2006

Walnut colorants were extracted from walnut hull and their dyeing properties on cotton were investigated. Effect of dyeing conditions on dye uptake and effect of mordanting on dye uptake, color change and colorfastness were explored. Walnut colorants showed low affinity to cotton compared with wool and its isotherm adsorption curve was Freundlich type. It was considered that hydrogen bonding and van der Waal's force were involved in the adsorption of walnut colorants onto cotton. The dyed cotton showed YR color and there was no significant color change as pH changed. The dyed cotton showed generally high colorfastness except fastness to washing and light. Mordanting did not improve dye uptake and colorfastness, and not affect color of the dyed cotton significantly.

• Transactions of the Korean hydrogen and new energy society
• /
• v.23 no.4
• /
• pp.310-315
• /
• 2012

A simple drying process was developed for the preparation of a Pt/Nafion self-humidifying membrane to be used for a proton-exchange membrane fuel cell (PEMFC). Platinum (II) bis (acetylacetonate), $Pt(acac)_2$ was sublimed, penetrated into the surface of a Nafion film and then reduced to Pt nanoparticles simultaneously without any support of a reducing agent in a glass reactor at $180^{\circ}C$ for 15 min. The process was carried out in $N_2$ atmosphere to prevent the oxidation of Pt nanoparticles at high temperature. The morphology and distribution of the Pt nanoparticles were observed by transmission electron microscopy (TEM) and energy dispersive spectroscopy (EDS), and we found that the average Pt particle size was ca. 3.7 nm, the penetration depth was ca. $17{\mu}m$. Almost all Pt nanoparticles were formed just beneath the surface and the number density decreased rapidly as the penetration depth increased. To estimate water absorption characteristics of the Nafion membranes, water uptake at an isothermal condition was measured by dynamic vapor sorption (DVS), and it was found that water uptake of the Pt/Nafion membrane was higher than that of the neat Nafion membrane.

• Bulletin of the Korean Chemical Society
• /
• v.4 no.1
• /
• pp.3-9
• /
• 1983

Lithium n-butylborohydride was prepared from borane-dimethylsulfide (BMS) and n-butyllithium, and the approximate rates and stoichiometrics of its reactions with selected organic compounds containing representative functional groups were studied in THF at room temperature. Phenol and benzenetiol liberated hydrogen quickly and quantitatively, and the reactions of primary alcohols, 2,6-di-ter-butylphenol and 1-hexanethiol liberated hydrogen quantitatively within 3 hrs, whereas the reactions of secondary and tertiary alcohols were very slow. Aldehydes and ketones were reduced rapidly and quantitatively to the corresponding alcohols. Cinnamaldehyde utilized 1 equiv. of hydride rapidly, suggesting the reduction to cinnamyl alcohol. Carboxylic acids evolved 1 equiv. of hydrogen rapidly and further reduction was not observed. Anhydrides utilized 2 equiv. of hydride rapidly but further hydride uptake was very slow, showing a half reduction. Acid chlorides were reduced to the alcohol stage very rapidly. All the esters examined were reduced to the corresponding alcohol rapidly. Lactones were also reduced rapidly. Expoxides took up 1 equiv. of hydride at a moderate rate to be reduced to the corresponding alcohols. Nitriles and primary amides were inert to this hydride system, whereas tertiary amide underwent slow reduction. Nitroethane and nitrobenzene were reduced slowly, however azobenzene and azoxybenzene were quite inert. Cyclohexanone oxime evolved 1 equiv. of hydrogen rapidly, but no further reduction was observed. Phenyl isocyanate and pyridine N-oxide were proceeded slowly, showing 1.74 and 1.53 hydride uptake, respectively in 24 hours. Diphenyl disulfide was reduced rapidly, whereas di-n-butyl disulfide, sulfone and sulfonic acids were inert or sluggish. n-Hexyl iodide and benzyl bromide reacted rapidly, but n-octyl bromide, n-octyl chloride, and benzyl chloride reacted very slowly.

• Transactions of the Korean hydrogen and new energy society
• /
• v.17 no.1
• /
• pp.39-46
• /
• 2006

Highly ordered Li dispersed nickel oxide nanotubes were prepared with anodic aluminum oxide (AAO) template for hydrogen storage. Electron microscope results showed that uniform length and diameter of nickel oxide nanotubes were obtained. The wall thickness and outer diameter of nickel oxide nanotubes are about 40 - 50 nm and 200 - 400 nm, respectively. It was observed that the diameter of nickel oxide nanotubes is bigger than the pore diameter of AAO template. Li dispersed nickel oxide were consisted of nanoflakes and had structures of nanotubes and nanorods. For increasing the hydrogen adsorption and desorption capacity, the Li dispersed nickel oxide nanotubes were fluorinated. The fluorinated Li dispersed nickel oxide nanotubes showed 1.65 wt% of the hydrogen adsorption capacities at 77 K under 47 atm.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.19 no.3
• /
• pp.125-129
• /
• 2009

The preparation and characterization of niobium carbide crystallites were investigated in this study, and in particular, the effect of preparation conditions were studied on the synthesis of niobium carbides crystallites. For this purpose, various characterization techniques including x-ray diffraction, BET surface area, and oxygen uptake measurements were employed to characterize the synthesized niobium carbide crystallites. The niobium carbide crystallites were prepared using niobium oxide and methane gas or methane-hydrogen mixture. Using x-ray diffraction a lattice parameter of $4.45{\AA}$ and a crystallite size ranging from $52{\AA}$ to $580{\AA}$ was found. BET surface areas ranged from $3.2\;m^2/g$ to $16.6\;m^2/g$ and oxygen uptake values varied from $0.5{\mu}mol/g$ to $6.1{\mu}mol/g$. It was observed that niobium carbide crystallites were active for ammonia decomposition reaction. While the BET surface area increased with increasing the oxygen uptake, the conversion of ammonia decomposition reaction decreased. These results indicated that the ammonia decomposition over these materials was considered to be structure-sensitive.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.25 no.3
• /
• pp.577-585
• /
• 2001

Dyeing properties of the colorants extracted from pomegranate hull on cotton fabric were investigated. Effects of dyeing conditions and mordanting on dye uptake, color change and colorfastness were explored. Cationic agent treatment was done for cotton to improve low dyeability in natural dyeing. In addition antimicrobial activity of the cotton fabrics dyed with pomegranate colorants was examined by the shake flask method. Pomegranate colorants showed low affinity to cotton fiber and its adsorption isotherm was Freundlich type. Therefore, hydrogen bonding was involved in the adsorption of pomegranate colorants onto cotton fiber. Mordants did not significantly increase dye adsorption. Pomegranate colorants produced mainly yellow color on cotton fabric. In order to improve dye uptake, cotton was cationized by treating with Cationon UK(quarterly ammonium salt) and chitosan. The cationized cotton with Cationon UK showed higher dye uptake and shorter dyeing time, compared with the untreated cotton. Chitosan treated cotton also showed high dye uptake, but chitosan was less effective compared with Cationon UK. Fastness to washing, perspiration, and rubbing was not improved by mordanting and cationizing treatment, but light fastness was increased by all mordants and cationic agent. As dye concentration increased, bacterial reduction rate was increased and mordants did not significantly increase bacterial reduction rate.