• 제목/요약/키워드: Hydrogen generation system

검색결과 280건 처리시간 0.025초

시호 약침제제의 자유기 소거능 및 지질과산화 억제효능에 관한 연구 (Scavenging Effects of Free Radicals and Inhibitory Effects of Lipid Peroxidation of Bupleury Radix Aqua-Acupuncture Solution in Vitro)

  • 문진영;임종국
    • Journal of Acupuncture Research
    • /
    • 제15권2호
    • /
    • pp.135-145
    • /
    • 1998
  • Bupleury radix has been used for the treatment of fever, liver disease, inflammation in traditional medicine. The present study was carried out to evaluate the antioxidant effects of Bupleury radix aqua-acupuncture solution (BRAS) in vitro. Oxygen derived free radicals produced in the course of normal aerobic life, such as superoxide anion radical($O_2^-$ ), hydroxyl radicaI( OH), hydrogen peroxide($H_2O_2$) and singlet oxygen($^1O_2$) can attack polyunsaturated fatty acid in cell membranes, enzymes, other cell compounds, and give rise to lipid peroxidation, DNA damage, lipofuscin accumulation, structure alteration of cell membrane and cell death. In this study, antioxidant effects of BRAS on lipid peroxidation were determined according to the method of TBA. BRAS inhibited markedly peroxidation of linoleic acid during the autoxidation, and also inhibited lipid peroxidation induced by hydroxyl radical derived from $H_2O_2-Fe^{2+}$ in rat liver homogenate. And BRAS showed 30% scavenging effect on DPPH radical, also exhibited a 30% inhibitory effect on superoxide generation from xanthine-xanthine oxidase system. In addition, BRAS protected the cell death induced by tert-butyl hydroperoxide(t-BHP) and significantly increased cell viability in the normal rat liver cell(Ac2F).

  • PDF

진공 브레이징을 이용한 고온가스냉각로 중간 열교환기 후보재료의 접합성능에 관한 예비시험 (Preliminary Investigation on Joining Performance of Intermediate Heat Exchanger Candidate Materials of Very High Temperature Reactor(VHTR) by Vacuum Brazing)

  • 김경호;김광호;이민구;김흥회;김성욱;김숙환
    • 대한용접접합학회:학술대회논문집
    • /
    • 대한용접접합학회 2005년도 추계학술발표대회 개요집
    • /
    • pp.195-197
    • /
    • 2005
  • An intermediate heat exchanger(IHX) is a key component in a next-generation VHTR with process heat applications such as hydrogen production and also for an indirect gas turbine system. Therefore, high temperature brazing with nickel-based filler metal(MBF-15) was carried out to study the joining characteristic(microstucture, joining strength) of nickel-based superalloy(Haynes 230) by vacuum brazing. The experimental brazing was carried out at the brazing process, an applied pressure of about 0.74Mpa and the three kinds of brazing temperatures were 1100, 1150, and $1190^{\circ}C$ with holding time 5 minute. It's joining phenomena were analyzed by optical microscopy and scanning electron microscopy with EPMA. The results of microstructure in the centre-line region of a joint brazed with MBF-15 show a typical ternary eutectic of v-nickel, nickel boride and chromium boride.

  • PDF

Protective Effects of Ramie (Boehmeria nivea) against Oxidative Stress in C6 Glial Cells

  • Wang, Xiaoning;Cho, Sunghun;Kim, Ho Bang;Jung, Yong-Su;Cho, Eun Ju;Lee, Sanghyun
    • 한국자원식물학회지
    • /
    • 제28권6호
    • /
    • pp.675-681
    • /
    • 2015
  • β amyloid protein (Aβ) plays a critical role in the pathogenesis of Alzheimer's disease (AD) and possibly in Aβ-induced mitochondrial dysfunction and oxidative stress. Aβ can directly cause reactive oxygen species (ROS) production. Overproduction of ROS is considered to be involved in the pathogenesis of neurodegeneration of AD. Here, we investigated 9 kinds of ramie (Boehmeria nivea, (L.) Gaud., BN; hereafter denoted as BN) for their protective action against oxidative stress in a cellular system using C6 glial cells. We observed loss of cell viability and high levels of ROS generation after treatment with hydrogen peroxide (H2O2) and Aβ25-35. However, treatments with BN extracts led to an increase in cell viability and decrease in ROS production induced by H2O2 and Aβ25-35. In particular, the extracts of BN-01 (seobang variety from Seocheon) and BN-09 (local variety from Yeonggwang) showed excellent anti-oxidative properties. This indicates that BN extracts could prevent neurodegeneration by reducing oxidative stress in cells.

Development of a Welding Machine System Using Brown Gas by Improved Water Electrolyzation

  • Lee Yong-Kyun;Lee Sang-yong;Jeong Byung-Hwan;Mok Hyung-Soo;Choe Gyu-Ha
    • Journal of Power Electronics
    • /
    • 제5권4호
    • /
    • pp.305-311
    • /
    • 2005
  • Throughout the world, studies on the water energization are currently under way. Of those, Brown gas, which is generated through the electrolyzation of water and is a mixed gas of the constant volume of 2 parts hydrogen to 1 part oxygen, has better characteristics in terms of economy, energy efficiency, and environmental affinity than those of acetylene gas and LPG (Liquefied Petroleum Gas) used for existing welding machines. This paper analyzes the characteristics of Brown gas and presents methods for increasing the generating efficiency of Brown gas by designing a power supply to deliver power to a water-electrolytic cell and designing a cylindrical electrode to improve the efficiency of the electrolyzer needed for water electrolyzation. Based on the above the methods, a welding machine using Brown gas is developed. And the generation efficiency of Brown gas is measured tinder different conditions (duty ratio, frequency and amplitude) of supplied power.

충남대학교 차세대 로켓엔진 시스템 기술 연구 현황 (Chung-nam National University's Status of Research on Technology of the Next Generation Rocket Engine System)

  • 장지훈;전준수;김태완;고영성;김선진
    • 한국추진공학회:학술대회논문집
    • /
    • 한국추진공학회 2012년도 제38회 춘계학술대회논문집
    • /
    • pp.196-200
    • /
    • 2012
  • 충남대학교 액체로켓실험실에서는 차세대 우주발사체 추진시스템의 국내 독자적 개발 능력 구축을 목표로 차세대 추진 시스템의 소요 임무를 분석하고, 과산화수소 및 메탄의 새로운 친환경 추진제를 이용한 이원 추진 시스템의 적용 특성을 분석한 후 각각의 추진제 조합에 따른 축소형 로켓엔진의 개발 기술을 단계적으로 획득하고 있다. 이를 통하여 향후 국내에서 소요임무별로 새롭게 요구되는 차세대 실물형 로켓엔진(연소기) 개발에 직접 활용될 수 있는 설계/제작/시험 기술을 확보하고자 한다.

  • PDF

Performance evaluation of Accident Tolerant Fuel under station blackout accident in PWR nuclear power plant by improved ISAA code

  • Zhang, Bin;Gao, Pengcheng;Xu, Tao;Gui, Miao;Shan, Jianqiang
    • Nuclear Engineering and Technology
    • /
    • 제54권7호
    • /
    • pp.2475-2490
    • /
    • 2022
  • The Accident Tolerant Fuel (ATF) is a new concept of fuel, which can not only withstand the consequences of the accident for a longer time, but also maintain or improve the performance under operating conditions. ISAA is a self-developed severe accident analysis code, which uses modular structures to simulate the development processes of severe accidents in nuclear plants. The basic version of ISAA is developed based on UO2-Zr fuel. To study the potential safety gain of ATF cladding, an improved version of ISAA, referred to as ISAA-ATF, is introduced to analyze the station blackout accident of PWR using ATF cladding. The results show that ATF cladding enable the core to maintain a longer time compared to zirconium alloy cladding, thereby enhancing the accident mitigation capability. Meanwhile, the generation of hydrogen is significantly reduced and delayed, which proves that ATF can improve the safety characteristics of the nuclear reactor.

거대조류 바이오가스를 연료로 하는 고체산화물 연료전지를 이용한 삼중발전 (Trigeneration Based on Solid Oxide Fuel Cells Driven by Macroalgal Biogas)

  • ;유준
    • 청정기술
    • /
    • 제26권2호
    • /
    • pp.96-101
    • /
    • 2020
  • 이 논문에서는 3세대 바이오매스 중 거대조류, 즉 해조류 바이오매스로부터 유래된 바이오가스를 연료로 사용하여 열, 전력 및 수소를 생산하는 삼중발전의 타당성 평가를 수행하였다. 이를 위해 3 MW급 고체산화물 연료전지와 가스터빈, 그리고 유기 랭킨 사이클로 이루어진 상용 규모의 열, 전력 및 수소 생산공정을 공정모사기를 사용하여 설계, 모사하였고, 공정모사로 부터 얻은 열 및 물질 수지를 통해 각 단위조작 장치의 가격을 추정하고 경제성을 분석하였다. 수소를 생산하기 위해 고체산화물 연료전지의 설계를 수정하였는데, 연료전지 내 애프터-버너를 제거하고 수성-가스 전환 반응기를 추가하였다. 공정모사 결과 설계된 삼중발전 공정은 시간당 3.47톤의 건조 갈조류 원료로부터 생산된 2톤의 바이오가스를 이용하여 2.3 MW의 전력과 50 kg hr-1의 수소를 37%의 효율로 생산한다. 이 결과를 토대로 가장 현실적인 시나리오에 대해 경제적으로 평가하고 BESP (breakeven electricity selling price)를 계산하였는데, ¢10.45 kWh-1로 기존의 고정 발전 대비 동등 이상의 수준으로 나타났다.

전기투석/용매추출 공정에서 멤브레인 표면 개질을 통한 구리 이온의 회수 효율 향상 (Improved Copper Ion Recovery Efficiency through Surface Modification of Membranes in the Electrodialysis/Solvent Extraction Process)

  • 박중원;김리나;이현주;김민석;손희상
    • 멤브레인
    • /
    • 제32권6호
    • /
    • pp.486-495
    • /
    • 2022
  • 본 연구는 전기투석과 용매추출을 융합한 희유금속 회수 공정에서 분리막과 음이온교환막의 개질을 통해 유기상과 수상에 대한 분리막의 낮은 젖음성 및 AEM을 통한 수소이온 투과로 인한 금속이온의 회수 효율 감소를 개선하였다. 구체적으로, 분리막 표면 중 한면은 polydopamine (PDA) 통한 친수성 개질, 다른 면은 SiO2 또는 graphene oxide를 통한 친유성개질을 함으로써 분리막의 젖음성을 개선하였다. 또한, 음이온교환막의 표면을 polyethyleneimine, PDA, poly(vinylidene fluoride) 등을 이용, 개질해 수분 흡수(Water uptake) 감소 및 기공구조 변화를 통해 수소이온 수송을 억제해 수소이온 투과를 억제할 수 있다. 개질된 막 표면 형상과 화학적 특성 및 조성은 주사전자현미경과 푸리에변환 적외선 분광법을 통해 확인되었고, 이를 구리 이온 회수 시스템에 적용해 향상된 추출 및 탈거 효율과 수소이온 수송 억제능을 확인하였다.

역전기투석용 광가교형 폴리아크릴레이트계 음이온교환막 제조 (Preparation of Polyacrylate-Based Non-Reinforced Anion Exchange Membranes via Photo-Crosslinking for Reverse Electrodialysis)

  • 김태훈;양석환;이장용
    • 멤브레인
    • /
    • 제34권1호
    • /
    • pp.70-78
    • /
    • 2024
  • 본 연구에서는 역전기투석용 4차 암모늄이온을 음이온교환기로 갖는 폴리아크릴레이트계 광가교형 음이온교환막을 개발하였다. 역전기투석은 청정 재생에너지 생산 시스템이지만 출력이 낮고 핵심 소재인 분리막의 가격이 비싸다는 단점으로 인해 상용화에 제한이 있다. 이에, 지지체가 없는 광가교형 음이온교환소재를 제조하였으며 개발한 고분자의 주쇄는 우수한 물성의 엔지니어링 플라스틱을 기반으로 제조하였다. 제조된 분리막은 우수한 물리적, 화학적, 전기화학적 특성을 보였으며 상용 음이온교환막인 AMV와 비교하여 약 50% 낮은 분리막 저항을 보였다. 더욱이 CQAPPOA-35는 40 ㎛의 얇은 분리막 두께에도 불구하고 상용막과 동등 수준의 선택도를 보이는 것을 확인할 수 있었다. CQAPPOA-35을 적용한 RED 스택은 최대 2.327 W m-2 (flow rate : 100 mL min-1)의 출력 밀도를 보여 AMV가 도입된 것보다 15% 향상된 성능 특성을 보였다. 개발된 CQAPPOA-35이 광경화를 통해 쉽고 저렴하게 제조할 수 있으며 RED 스택 특성도 매우 우수하다는 점을 고려할 때, 개발된 CQAPPOA-35은 RED용 음이온교환막으로 상용 활용을 위한 대안이 될 수 있을 것으로 기대된다.

CFD를 이용한 내장형 안테나 유도 결합 플라즈마 시스템 모델링 (Computational Fluid Dynamic Modeling for Internal Antenna Type Inductively Coupled Plasma Systems)

  • 주정훈
    • 한국진공학회지
    • /
    • 제18권3호
    • /
    • pp.164-175
    • /
    • 2009
  • 전산 유체 역학 코드를 사용하여 안테나 내장형 유도 결합 플라즈마 시스템의 가스 유동 특성, 전력 흡수, 전자 온도, 전자 밀도, 화학종의 분포에 대해서 살펴보았다. 복잡한 현실적 3차원 시스템에 대한 안정한 수치해의 도출을 위해서 최적화된 격자생성 전략을 구사하였으며, 이를 이용하여 플라즈마 질화 시스템을 한 예로 전력 흡수, 가스 유동, 전자 온도, 전자 밀도, 화학종의 분포를 분석하였다. 금속 노출형 안테나의 경우 전력 도입부 쪽에 전력 흡수의 불균형이 모델에서 예측되었으며 유전체피복 안테나의 한 예에서 전력 흡수 표피 깊이가 실제 보고된 값인 53 mm와 잘 일치하는 50 mm로 예측되었다. 또한 수소연료 전지 분리판을 위한 고속 질화 공정용 시스템의 모델링에서도 산업용 대량 처리 시스템에 적절한 다중 분리판의 장입 간격을 가스 유동, 활발한 질화종인 질소 원자와 질소 분자 이온의 농도를 근거로 예측하였다.