• Tribology and Lubricants
• /
• 제38권5호
• /
• pp.191-198
• /
• 2022

With the world's fast expanding energy usage comes a slew of new issues. Because one-third of energy is lost in overcoming friction, tremendous effort is being directed into minimizing friction. Surface texturing is the latest surface treatment technology that uses grooves and dimples on the friction surface of the machine to significantly reduce friction and improve wear resistance. Despite the fact that many studies on this issue have been conducted, most of them focused on parallel surfaces, with relatively few cases of converging films, as in most sliding bearings. This study investigated the lubrication performance of surface-textured inclined slider bearings. We analyzed the continuity and Navier-Stokes equations using a commercial computational fluid dynamics code, FLUENT. The results show the pressure and velocity distributions and the lubrication performance according to the number and orientation of rectangular dimples. Partial texturing somewhat improves the lubrication performance of inclined slider bearings. The number of dimples with the maximum load-carrying capacity (LCC) and minimum friction is determined. When the major axis of the dimple is arranged in the sliding direction, the LCC and friction reduction are maximized. However, full texturing significantly reduces the LCC of the slider bearing and increases the flow rate. The results have the potential to improve the lubrication performance of various sliding bearings, but further research is required.

• Journal of Mechanical Science and Technology
• /
• 제17권3호
• /
• pp.350-356
• /
• 2003

In this study, a numerical analysis for the piston secondary dynamics of small refrigeration reciprocating compressors is performed. In general, the length of cylinder in this class of compressors is shortened to diminish the frictional losses of the piston-cylinder system. So, the contacting length between piston and cylinder wall is in variable with the rotating crank angle around the BDC of the reciprocating piston. In the problem formulation of the piston dynamics, the variation in bearing length of the piston and all corresponding forces and moments are considered in order to determine the piston trajectory, velocity and acceleration at each step. A Newton-Raphson procedure was employed in solving the secondary dynamic equations of the piston. The developed computer program can be used to calculate the entire piston trajectory and the lubrication characteristics as functions of crank angle under compressor running conditions. The results explored the effects of some design parameters and operating conditions on the stability of the piston, the oil leakage, and friction tosses.

• KSTLE International Journal
• /
• 제4권1호
• /
• pp.1-7
• /
• 2003

A turbo pump unit provides high pressure oxygen and fuel in a space shuttle main engine (SSME). This paper focused on rotordynamics, investigating its characteristics based on a numerical simulation of turbo pump finite element model. Speeds up to 50,000 rpm are considered, as well as the special problems related to elastic-ring, seal hydrodynamic force, shroud force and clearance-excitation farce. The rotordynamic prediction shows that the elastic-ring which is inserted between the casing and the outer race of ball bearing allows far an acceptable separate margin of first critical speed. Additionally, the results show that the floating ring seal, which have a peculiar ring, adds substantial stiffness and damping to the system as well as exhibits superior performance in terms of rotordynamic stability of system compared to the plain seal.

• 한국자기학회지
• /
• 제8권2호
• /
• pp.93-98
• /
• 1998

자성유체의 자기력, 점성, 비열등을 이용한 댐핑효과로 스피커의 대출력화, 고급화를 도모할수 있다. 공침법으로 합성한 magnetite에 올레인산을 피복하고 윤활유에 분산하여 스피커 댐퍼용 자성유체를 제조하였다. 제조한 자성유기체의 자기적 특성, 전도 및 열안정성을 측정하였고, 이를 고음스피커인 6cm tweeter에 적용하여 댐핑효과와 방열효과를 평가하였다. 일본 NFC의 APG-815 자성유체의 특성돠 비교하였을 때 고체비율 20%로 제조한 자성유페는 자기적특성, 온도상승에 따른 점도변화, 댐핑효과 및 방열특성이 APG-815와 같거나 우수하였다.

• Tribology and Lubricants
• /
• 제24권3호
• /
• pp.133-139
• /
• 2008

In recently designed diesel engines, the running conditions for piston pin bearings have become very severe due to combustion pressure and temperature increase. In this paper, it will be investigated the tendency of piston pin rotating motion by calculating the friction coefficient at piston pin bearings, the oil film thickness and the frictional torques induced by hydrodynamic shear stress. Finally, the pressure distributions on the oil film of piston pin bearings will be found by two-dimensional lubrication analysis in order to help the optimum design of the bearings of piston pin. Specially, it is investigated the effects on the film pressure distribution due to the change in maximum combustion pressure.

• 대한기계학회논문집A
• /
• 제29권3호
• /
• pp.411-417
• /
• 2005

Surface texturing of tribological application is another attractive technology of friction reducing. Also, reduction of friction is therefore considered to be a necessary requirement for improved efficiency of machine. In this paper attempts to investigate the effect of density for micro-scale dimple pattern using photolithography on bearing steel flat mated with pin-on-disk. We demonstrated the lubrication mechanism for a Stribeck curve, which has a relationship between the friction coefficient and a dimensionless parameter for lubrication condition. It is found that friction coefficient is depended on the density of surface pattern. It was thus verified that micro-scale dimple could affect the friction reduction considerably under mixed and hydrodynamic lubrication conditions from based on friction map. Lubrication condition regime has an influence on the friction coefficient induced the density of micro dimple.

• Tribology and Lubricants
• /
• 제24권2호
• /
• pp.55-62
• /
• 2008

In recently designed diesel engines, the running conditions for piston pin bearings have become very severe due to combustion pressure and temperature increase. In this paper, it will be investigated the tendency of piston pin rotating motion by calculating the friction coefficient at piston pin bearings, the oil film thickness and the frictional torques induced by hydrodynamic shear stress. Finally, the pressure distributions on the oil film of piston pin bearings will be found by two-dimensional lubrication analysis in order to help the optimum design of the bearings of piston pin. Specially, it is investigated how the changes in combustion pressure at exhaust and intake stroke and the pressure-viscosity index effect on the film pressure distribution.

• Tribology and Lubricants
• /
• 제8권2호
• /
• pp.26-34
• /
• 1992

This paper suggests a method to predict the flying state of the head slider in a hard disk drive (HDD) by using an optimization technique. The modified Reynolds equation for the hydrodynamic lubrication theory under the slip flow condition is used to describe the air-bearing system and a Finite Volume Method (FVM) is applied to solve the equation. Especially, Augmented Lagrange Multiplier (ALM) method is employed to find the minimum flying height, the pitch angle and the roll angle of the slider, which is shown to be faster and more general than the conventional update schemes. By using the proposed method, the variations of the flying state are analyzed as a function of the slider position in the direction of the disk radius for various disk velocities and skew angles.

• Tribology and Lubricants
• /
• 제13권2호
• /
• pp.89-95
• /
• 1997

This paper considers two dimensional analysis for lubrication between the single piston ring and the cylinder liner. The piston ring is treated as a reciprocating, hydrodynamic bearing with combined sliding and squeeze motion. Reynolds' equation is used, to model lubrication with Reynolds' cavitation boundary condition. This analysis is developed to get the cyclic variation of minimum film thickness and viscous frictional force. Two types of piston ring face shape are considered. This result can be used to study the influence of ring shape design parameter to improve the characteristics of sealing and lubrication.

• 한국재료학회지
• /
• 제8권12호
• /
• pp.1176-1181
• /
• 1998

VIM에 의해 제조된 0.55wt.% C-1.68wt.% Mn강을 사용하여 고주파 유도경화 베어링강의 특성을 조사하였다. 시편의 청정도는 DIN 50602에 의한 K4값이 6.41로 측정되어 높게 나타났다. 고주파 유도경화된 시편은 약 2.7mm의 유효경화층 깊이를 가진 표면경화층이 형성되었으며 불균질한 submicron크기의 lath 마르텐사이트가 표면경화층에 형성되었다. 회전접촉 피로 시험은 최대 헤르쯔 응력 492 kgmm$^{-2}$ 을 가하며 탄성유체 윤활조건에서 실시되었다. 회전접촉 피로시험 후 시편의 궤도면 직하에서 측정된 미소경도는 유도경화한 경우에 비해 표면직하 약 $500\mu\textrm{m}$ 깊이까지 증가하였다. 그 경도증가량의 최대치를 나타내는 위치는 표면에서부터 약 100$\mu\textrm{m}$ 깊이로 밝혀졌으며 백색부식영역 (white etching area)을 나타내었다 회전접촉 피로시험 후 시편의 궤도면 직하, 이 백색 부식영역에서 균열이 생성되고 전파하였다.