• 한국환경과학회지
• /
• 제8권5호
• /
• pp.575-586
• /
• 1999

From the environmental aspects, primary productivity of phytoplankton plays the most improtant role in enhancement of marine culture oyster production. This study may be divided into two branches; one is estimation of maximum oyster meat production per unit facility(Carrying Capacity) under the present enviromental conditions in Kamak Bay, the other is improvement of carrying from increase of primary productivity by changing the environmental conditions that cause not ot form an unfavorable environment such as the formation of oxygen deficient water mass using the eco-hydrodynamic model. By simulation of three-dimensional hydrdynamic model and ecosystem model, the comparison between observed and computed data showed good agreement. The results of sensitivity analysis showed that phytoplankton maximum growth rate was the most important parameter for phytoplankton and dissolved oxygen. The estimation of mean primary productivity of Wonpo, Kamak, Pyongsa, and Kunnae culture grounds in Kamak Bay during culturing period were 3.73gC/$m^2$/d, 2.12gC/$m^2$/d, 1.98gC/$m^2$/d, and 1.26gC/$m^2$/d, respectively. Under condition not ot form the oxygen deficient water mass, four times increasing of pollutants loading as much as the present loading from river increased mean primary productivity of whole culture grounds to 4.02gC/$m^2$/d. Sediment N, P fluxes that allowed for 35% increasing from the present conditions increased mean primary productivity of whole culture grounds to 3.65gC/$m^2$/d. Finally, ten times increasing of boundary loadings from the present conditions increased mean primary productivity of whole culture grounds to 3.95gC/$m^2$/d. The maximum oyster meat production per year and that of unit facility in actual oyster culture grounds under the present conditions were 6,929ton and 0.93ton, respectively. This 0.93ton/unit facility is considered to be the carrying capacity in study area, and if the primary productivity is increased by changing the environmental conditions, oyster production can be increased.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2021년도 학술발표회
• /
• pp.207-207
• /
• 2021

The Vietnamese Mekong Delta(VMD) covers an area of 62,250 km² in the lowest basin of the Mekong Delta where more than half of the country's total rice production takes place. In 2016, an estimated 1.29 million tonnes of Vietnam's rice were lost to the country's biggest drought in 90 year and particularly in VMD, at least 221,000 hectares of rice paddies were hit by the drought and related saltwater intrusion from the South China Sea. In this study, 3D numerical simulations using Delft3D hydrodynamic models with calibration and validation process were performed to examine flow characteristics, climate change scenarios, water level changes, and salinity concentrations in the nine major estuaries and coastal zones of VMD during the 21^st century. The river flows and their interactions with ocean currents were modeled by Delft3D and since the water levels and saltwater intrusion in the area are sensitive to the climate conditions and upstream dam operations, the hydrodynamic models considered discharges from the dams and climate data provided by the Coupled Model Intercomparison Project Phase 6(CMIP6). The models were calibrated and verified using observational water levels, salinity distribution, and climate change data and scenarios. The results agreed well with the observed data during calibration and validation periods. The calibrated models will be used to make predictions about the future salinity intrusion events, focusing on the impacts of sea level rise due to global warming and weather elements.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2023년도 춘계학술대회
• /
• pp.151-151
• /
• 2023

무인잠수정의 정밀한 제어 시스템 개발에는 높은 정도의 조종 유체력 미계수 추정이 필수적이다. 전통적으로 조종 미계수는 모형을 이용한 실험(사항, Planar Motion Mechanism, Rotating Arm)과 단순한 이론과 경험을 기반으로 개발된 경험식으로 추정하였다. 그러나 최근 크게 향상된 계산기 성능의 발전은 전산유체역학의 적용성을 크게 확대하였다. 따라서 본 논문에서는 만타형 무인잠수정의 조종 유체력 미계수 추정을 위한 전산유체역학 해석기법을 개발하고자 한다. 특히, 수직 동적 PMM 시험법에 관한 해석기법을 중점적으로 개발한다. 개발된 기법을 이용하여 만타형 무인 잠수정의 6자유도 유체력을 추정하고 그 결과를 실험과 비교하여 개발된 기법을 검증한다. 본 연구에서는 1/6 모형을 이용한다. 수치해석기법 개발은 RASN 기반 상용 해석소프트웨어인 STAR-CCM+를 사용하였다.

• 한국해안해양공학회지
• /
• 제9권1호
• /
• pp.43-55
• /
• 1997

니토층의 압밀과 침식 및 파랑에 의한 유동화에 대한 이론과 실험결과를 개략적으로 고찰하였으며, 영광 해역의 기존자료를 재분석하여 주기적 및 비수기적 압밀과 유동화를 겪는 해저 니토층의 전단강도 연직분포의 시간변화 이력의 중요성에 관하여 정성적의로 논하였다. 기존의 실내설험 결과 및 영광 해역의 현장자료에 따르면, 저면의 압밀과 유동화를 고려하지 않고 니토 혹은 오염물질을 수치모의할 경우 ,유체역학적 작용력과 수주내 농도증가 사이에 시간차이를 유발할 수 있다. 이러한 시간차이는, 특히 파랑에너지가 비교적 큰 대조차 환경에서 저면으로부터 기인하는 고농도 물질의 이동방향 측면, 즉 물질수지 측면에서 심각한 오차를 발생시킬 수 있다

• Geomechanics and Engineering
• /
• 제11권1호
• /
• pp.1-39
• /
• 2016

The finite element method (FEM), discrete element method (DEM), and Discontinuous deformation analysis (DDA) are among the standard numerical techniques applied in computational geo-mechanics. However, in some cases there no possibility for modelling by traditional finite analytical techniques or other mesh-based techniques. The solution presented in the current study as a completely Lagrangian and mesh-free technique is smoothed particle hydrodynamics (SPH). This method was basically applied for simulation of fluid flow by dividing the fluid into several particles. However, several researchers attempted to simulate soil-water interaction, landslides, and failure of soil by SPH method. In fact, this method is able to deal with behavior and interaction of different states of materials (liquid and solid) and multiphase soil models and their large deformations. Soil indicates different behaviors when interacting with water, structure, instrumentations, or different layers. Thus, study into these interactions using the mesh based grids has been facilitated by mesh-less SPH technique in this work. It has been revealed that the fast development, computational sophistication, and emerge of mesh-less particle modeling techniques offer solutions for problems which are not modeled by the traditional mesh-based techniques. Also it has been found that the smoothed particle hydrodynamic provides advanced techniques for simulation of soil materials as compared to the current traditional numerical methods. Besides, findings indicate that the advantages of applying this method are its high power, simplicity of concept, relative simplicity in combination of modern physics, and particularly its potential in study of large deformations and failures.

• 한국수산과학회지
• /
• 제25권2호
• /
• pp.133-143
• /
• 1992

The water-quality control for coastal waters is continuously required in view point of the environmental protection. The purpose of this study is to simulate the hydrodynamic process and the dispersion phenomena of several pollutants in Suyeong Bay, Pusan. The present study employs the depth-averaged 2-dimensional model for nemerical simulation of the hydrodynamics and diffusion. The nemerical solution is obtained by ADI(Altenating Direction Implicit) scheme which is frequently used for tidal current and diffusion computations in the coastal zone. To verify the nunlerical results, the field observations of various water quality parameters such as COD, SS and nutrients were performed during the spring tide. In the results of this study, the computed tidal currents show the clockwise flows for ebb tide and counter-clockwise flows for flood tide. In comparison with the water-qualities in ebb tide and flood tide, there seems to be slightly deteriorated in ebb tide and especially near the estuary of Suyeong River. In flood tide, however, the water-quality near Kwangan Beach is deteriorated. The computed distributions of COD and SS are in god agreements with the observed ones, while those of $PO_4\;^{3-}-P\;and\;NO_3\;^--N$ show slight differences due to the complex transformation processes.

• 물과 미래
• /
• 제16권4호
• /
• pp.221-236
• /
• 1983

황해 및 동지나해와 같은 천해에서 해류 및 해면변화의 주요인은 조석이다. 근년에 수직적분된 운동방정식 및 연속방정식을 기초로 한 황해 및 동지나해의 이차원 수동역학적 수치 모델이 개발되어 조석의 주분호의 진폭, 위상을 만족스러운 정도로서 재현할 수 있었으며 일련의 수치실험에 의해 이 해역의 조석역학을 이해하는 데 필요한 자료를 제공하였다. 다음 단계로서 황해 및 동지나해의 삼차원 수동역학적 수치모델이 수립되어 조류와 정상 균일풍에 의한 해류의 수직분포가 산정되었으며 그 결과가 토의되었다.

• Structural Engineering and Mechanics
• /
• 제57권3호
• /
• pp.403-423
• /
• 2016

The challenges involved with fatigue damage assessment of steel catenary riser (SCR) in the touchdown zone (TDZ) are primarily due to the non-linear behaviour of the SCR-seabed interaction, considerable uncertainty in SCR-seabed interaction modelling and geotechnical parameters. The issue of fatigue damage induced by the cyclic movements of the SCR with the seabed has acquired prominence with the touch down point (TDP) interaction in the TDZ. Therefore, the SCR-seabed response is critical for reliable estimation of fatigue life in the TDZ. Various design approaches pertaining to the lateral pipe-soil resistance model are discussed. These techniques have been applied in the finite element model that can be used to analyse the lateral SCR-seabed interaction under hydrodynamic loading. This study investigates the sensitivity of fatigue performance to geotechnical parameters through a parametric study. In this study, global analyses are performed to assess the influence of vertical linear seabed springs, the lateral seabed model and the non-linear seabed model, including trench evolution into seabed, seabed normalised stiffness, re-penetration offset parameter and soil suction resistance ratio, on the fatigue life of SCRs in the TDZ.

• 대한조선학회논문집
• /
• 제51권2호
• /
• pp.154-161
• /
• 2014

Naval ships have hull appendages which are more exposed to the outside because of its small block coefficient compared with commercial ships. These exposed hull appendages like skeg, strut and shaft line affect the maneuverability of a ship. The effect of hull appendages has considered at initial design stage to estimate more accurate maneuverability. In this paper, sensitivity analysis is used to analyze the effect on maneuverability by hull appendages. 3 DOF maneuvering equations based on Mathematical Modelling Group (MMG) model are used and propeller & rudder model are modified to reflect the characteristics of twin propeller & twin rudder. Numerical maneuvering simulations (Turning test, Zig-zag test) for benchmark naval vessel, David Taylor Model Basin (DTMB) 5415 are performed. In every simulation, it is calculated that stability indices and maneuverability characteristics (Tactical Dia., Advance, 1st Overshoot, Time of complete cycle) with respect to the parameters (area times lift coefficient slope, attachment location) of hull appendages. As a result, two regression formulas are established. One is the relation of maneuverability characteristics and stability indices and the other is the relation of stability indices and hull appendages.

• Environmental Engineering Research
• /
• 제25권3호
• /
• pp.400-408
• /
• 2020

Hydrodynamic study of Activated Sludge Process (ASP) is important to optimize the reactor performance and detect anomalies in the system. Residence time distribution (RTD) study has been performed using LiCl as tracer on a pilot scale aeration tank (AT) and ASP, treating the pulp and paper mill effluent. The hydraulic performance and treatment efficiency of the AT and ASP at different operating parameters like residence time, recycle rate was investigated. Flow anomalies were identified and based on the experimental data empirical models was suggested to interpret the hydrodynamics of the reactors using compartment modelling technique. The analysis of the RTD curves and the compartment models indicated increase in back-mixing ratio as the mean hydraulic retention time (MHRT) of the tank was increased. Bypassing stream was observed at lower MHRT. The fraction of dead zone in the tank increased by approximate 20-25% with increase in recycle rate. The fraction of the stagnant zone was found well below 5% for all performed experiments, which was under experimental error. The substrate removal of 91% for Chemical oxygen demand and 96% for Biochemical oxygen demand were observed for the ASP working at a hydraulic mean residence time 39 h MRT with a 20% recycling of activated sludge.