• 한국정밀공학회지
• /
• 제24권10호
• /
• pp.75-82
• /
• 2007

The AMT(Automated Manual Transmission) has been developed by utilizing the auto clutch system and the automatic shift mechanism, to automate the clutch operation and shift operation of the existing MT(Manual Transmission). The use of hydraulic actuator for each actuator of the clutch and gear has realized a reduction of fuel consumption and exhaust emission. In this paper, we develop a simulator for the transmission control system of the AMT using AMESim. The developed simulator can be applied to design the hydraulic select actuator system of an AMT.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1996년도 한국자동제어학술회의논문집(국내학술편); 포항공과대학교, 포항; 24-26 Oct. 1996
• /
• pp.1459-1464
• /
• 1996

The most important parameter for hydraulic active suspension system is to sustain desirable vehicle maneuvering stability and ride comfort without increasing consumption power. The performance of hydraulic active suspension system depends on damping force of body damping valve and piston damping valve. Hydraulic actuator design and damping valve parameter selection are essential and basic procedure to design hydraulic active suspension system. This paper is on computer simulation with use of mathematical model that was delivered from dynamic characteristic of hydraulic actuator, as know basic damping characteristics of hydraulic active suspension system. The aim of this paper is to select the system parameter that affect mainly hydraulic active suspension, and identify the validity on the system parameter selection.

• 대한기계학회논문집A
• /
• 제26권4호
• /
• pp.683-692
• /
• 2002

The most important parameter for hydraulic active suspension system is to sustain desirable vehicle maneuvering stability and ride comfort without increasing power consumption. The performance of hydraulic active suspension system depends on damping force of body damping valve and piston damping valve. Hydraulic actuator design and damping valve parameter selection are essential and basic procedure to design hydraulic system. This paper is on computer simulation with use of mathematical model that was delivered from dynamic characteristic of hydraulic actuator, as know basic damping characteristics of hydraulic active suspension system. The aim of this paper is to select the system parameter that affect mainly hydraulic active suspension, and identify the validity on the system parameter selection.

• 연구논문집
• /
• 통권28호
• /
• pp.101-110
• /
• 1998

This study discusses the developement of hydraulic rotary actuator design technology for industrial machinery and earthmoving equipment. The lubrication and wear analysis of sliding components of the machinery are very important parameters to strength the design technique. The analysis and wear test are performed for the selected materials of the above mentioned coupled sliding members. The can be used to select the better combinations of sliding components.

• Journal of Biosystems Engineering
• /
• 제43권4호
• /
• pp.331-341
• /
• 2018

Purpose: This study was conducted to develop a linear Proportional-Integral-Derivative (PID) control algorithm for the ascending and descending system of a rice transplanter and to analyze its response characteristics. Methods: A hydraulic model using a single-acting actuator, proportional valve and a PID control algorithm were developed for the ascending and descending system. The PID coefficients are tuned using the Ziegler-Nichols (Z-N) method and the characteristics of unit step response are analyzed to select the PID coefficients at various pump speeds. Results: Results showed that the performance of the PID controller was superior in any condition. It was found that the highest settling time and maximum overshoot were less than 0.210 s and 5%, respectively at all pump speed. It was determined that the steady state errors were 0% in all the cases. The lowest overshoot and settling time were calculated to be nearly 2.56% and 0.205 s, respectively at the pump rated speed (2650 rpm). Conclusions: The results indicated that the developed PID control algorithm would be feasible for the ascending and descending system of a rice transplanter. Finally, it would be helpful to plant the seedlings uniformly and improve the performance of the rice transplanter.