• 한국지반환경공학회 논문집
• /
• 제23권1호
• /
• pp.39-49
• /
• 2022

확장형 강관말뚝은 강관말뚝 내부에 확관장비를 삽입하여 강관을 확관하여 강관의 단면적을 증가시키는 공법으로 기존에 사용되는 마이크로파일과 비교하여 말뚝의 성능을 향상시킬 수 있는 공법이다. 본 연구에서는 실제 현장에서 강관의 확관이 가능한 확관장비를 개발하였다. 일련의 실내시험 및 현장시험을 통해 개발된 확관 장비의 강관 확장 성능을 확인하였다. 확관장치의 강관확관능력과 확관이 가능한 범위를 평가하기 위해 강관 확관장치의 최대압력에 대한 변형량과 확관시간을 측정한 결과, 강관두께가 얇을수록 변형량이 크게 발생하였으며 확관시간은 증가하였다. 두께 4.0mm 강관의 경우 두께 2.9mm 강관과 비교하여 변형량은 약 30% 적게 발생하였으나, 확관시간이 줄어드는 효과(약 40% 감소)를 얻을 수 있었다. 그리고 실제 지중에서 강관의 확관이 가능한지 확인하기 위해 현장 확관시험을 수행하였으며 지중에서 확관 후 확관 상태를 확인한 결과, 본 연구에서 개발한 강관 확관장치는 지중응력 조건에서도 강관 확관 성능을 발휘할 수 있음을 확인하였다. 마지막으로 확관하기 전 원상태의 강관과 확관 후 강관의 재료성능을 비교하여 확관형 강관말뚝의 역학적 안정성을 검증하였다.

• 한국유체기계학회 논문집
• /
• 제8권4호
• /
• pp.20-26
• /
• 2005

When the pumps are started or stopped for the operation or tripped due to the power failure, the hydraulic transients occur as a result of the sudden change in velocity. The field tests on the waterhammer were carried out for Pangyo booster pumping station in which had six booster pumps and two in-line pumps with the motor of output 1,700 kW, respectively. The booster pumping station was equipped with the pump control valve as the main surge suppression device, and the surge relief valve as auxiliary one. But the pump control valve had not early controlled in the planned closing mode, the slamming occurred to the valve of which abruptly closed during the large reverse flow. Because the positive pressure wave caused by the pump failure was superposed on the slam surge, the upsurge increased so extremely that the pump control valve was damaged. After the air chambers were additionally installed in the booster pumping station, it was preyed that the water supply system acquire the safety and reliability on the pressure surge.

• 대한의용생체공학회:의공학회지
• /
• 제17권1호
• /
• pp.43-48
• /
• 1996

We investigated the energistics of the physiological heart model by comparing predictive indexes of the myocardial oxygen consumption (MOC), such as tension-time index (R), tension-time or force-time inteual (FTI), rate-pressure product (RPP), pressure-work index, and systolic pressure-volume area (PVA) when using the electro-hydraulic left ventricular device (LVAD). We developed the model of LVAD incorporated the closed-loop cardiovascular system with a baroreceptor which can control heart rate and time-varying elastance of left and right ventricles. On considering the benefit of the LVAD, the effects of various operation modes, especially timing of assistance, were evaluated using this coupled computer model. Overall results of the computer simulation shows that our LVAD can unload the ischemic (less contractile) heart by decreasing the MU and increasing coronary flow. Because the pump ejection at the end diastolic phase of the natural heart may increase the afterload of the left ventricle, the control scheme of our LVAD must prohibit ejecting at this time. Since the increment of coronary flow is proportional to the peak aortic pressure after ventricle contraction, the LVAD must eject immediately following the closure of the aortic valve to increase oxygen availability.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2004년도 학술대회지
• /
• pp.277-282
• /
• 2004

This paper concerns about dynamic analysis of an underwater test miner, which operates on cohesive soil. The test miner consists of tracked vehicle and pick-up. device. The motion oj pick-up device relative to the vehicle chassis is controlled by two pairs of hydraulic cylinders. The test miner is modeled by means of a commercial software. A terramechanics model of cohesive soft soil is implemented to the software and applied to dynamic analysis of the test miner model. The dynamic responses of test miner are studied with respect to of four different types of terrain conditions.

• 한국기계가공학회지
• /
• 제12권6호
• /
• pp.69-76
• /
• 2013

This paper presents the development of the FCF method for the manufacturing of final products using numbers related to the minimum amount of work. The utilized product is a drum clutch, which is part of the transmission of an automobile. A double acting press is secured first and a prediction of the forming load on the practical material is made through an experiment with a plasticine model. Also, a finite element simulation using product shape and properties is performed, as well as a press experiment. A double acting press is manufactured that is suitable for a double acting experiment with a conventional hydraulic press(200 tons). A peripheral device for the press is additionally designed for experimental purposes. And, the press has as its essential points the drive speed, stroke control, etc., all of which influence the forming and is modified. Especially, a laser system is used for velocity measurement of two punches. The forming load of a practical material is predicted in order to derive a forming load formula for cold conditions on the basis of approximate similarity theory. Finite element analysis of the relative velocity ratio(RVR), etc., for most suitable flow defect(unfilling, etc.) prevention is achieved as well. The results are verified through a press experiment.

• 드라이브 ㆍ 컨트롤
• /
• 제20권1호
• /
• pp.41-47
• /
• 2023

The aim of this study was to develop a method for installing strain gauges on moving, lubricating oil-filled, and sealed parts, such as drive shafts of equipment, including construction machinery. A measuring device was constructed using an embedded CPU and an IoT sensor to measure the strain of the strain gauge, which allowed for the measurement of axial torque and axial force, and subsequent analysis. To verify the performance of the developed device, the axial torque and axial force of the forklift were measured during operation using a strain gauge attached to the inside of the drive shaft. This study confirmed the possibility of measuring and analyzing the strain of a moving part, such as the inside of a drive shaft, which is sealed and filled with hydraulic oil.

• Geomechanics and Engineering
• /
• 제37권2호
• /
• pp.109-122
• /
• 2024

Standard triaxial cells are commonly used to measure the mechanical behavior of saturated soils. However, this type of standard system is difficult to use for unsaturated soil specimens since it cannot measure the changes in the pore-air volume and pressure. This paper proposes to extend the measurement possibilities of the standard triaxial testing device in a simple way and to adapt it to partially saturated soils. The system is supplied by two hygrometers installed at each end of the cylindrical unsaturated specimen to measure local relative humidity, which allows the derivation of suction. The volumetric strain of the specimen is calculated by analyzing digital photos captured from the outside of the transparent cell wall. Specimens made of kaolin clay, having different hydraulic properties, were tested to verify the reliability of the measurements, and thus, the relevance of the proposed techniques to study the mechanical behavior of unsaturated soils.

• 지질공학
• /
• 제3권2호
• /
• pp.149-165
• /
• 1993

지하매질의 유동특성을 알기 위한 직접적인 방법은 아직도 현장수리시험에 의존하고 있다. 열극암반에서 유동모델의 개념정립을 위하여는 열극체계분포와 특히, 수리시험해석결과가 중요시되고 있다. 국내에서 수행되고 있는 수리시험은 조사공구간별에 따른 수리전도도를 방사상의 정상류로 가정하여 결과를 해석하고 있다. 또한 시험대상 매질을 균질한 대수층 또는 단순한 기하학적 형태의 매질로 간주하며 구간별 투수량계수는 시험구간을 가로지르는 각 열극의 투수량계수의 합과 같다고 가정한다. 국내 기존의 수리시험 및 해석방법으로는 수리학적 경계면의 영향(boundary effects)이나 유동로의 기하학적 형태(flow geometry)에 대한 자료를 얻기가 힘들며, 일정한 조사공 주변을 벗어나면 투수성열극의 연결성에 대한 정보를 구할 수 없다. 열극특성을 고려한 지하수유동 해석을 위하여 단일공 정압주입시험을 실시하였으며, 비정상류해석방법을 통하여 유동차원(flow dimension)에 대한 분석을 시도하였다. 시추시에는 단일패커시험을 일정구간별로 시행하였으며, 조사공의 시추후에는 이중패커에 의한 구간별 시험을 실시하였다. 비정상류해석으로 구한 수리전도도값은 정상류해석의 결과와 큰 차이(10배 이내)는 없었으나, 정압하에서 도출된 유동량변화곡선에서 유동차원분석이 가능하였다. 상부구간(<10m 깊이)의 단일 및 이중패커시험결과는 모두 정상류의 유동차원이 나타났으며, 이는 영향반경의 경계면이 open system임을 알 수 있다. 15m 깊이에서 도출된 유동량변화곡선은 1차원 유동상태에서 3차원(구상유동)으로 변화하였다. 하부구간(25m 깊이)의 시험결과는 closed system 특성이 관찰되었으며, 이는 조사구간에서 연결된 열극이 수리적으로 격리되어 있음을 알 수 있다. 현장수리시험으로부터 보다 많은 자료를 도출하기 위하여는 무엇보다도 수리시험장비의 보완이 필요하다. 특히 조사구간을 완벽하게 분리할 수 있는 패커장비와 미세한 유동량변화를 계측할 수 있는 유량계의 확보가 필수적이며, 조사구간의 압력변화를 자동기록할 수 있는 계측기기가 필요하였다.

• 대한기계학회논문집A
• /
• 제41권7호
• /
• pp.683-689
• /
• 2017

고유가, 환경규제 등의 국제무역환경 변화에 따라 수출주력상품인 유압 브레이커의 고부가가치화를 위하여 지능형 전자제어유압시스템 분야인 ICT 융합기술을 활용하여 암반특성을 예측하고 최적모드(다단형)로 구동하는 지능형 파쇄기술 및 에너지 효율을 극대화할 수 있는 유압 브레이커 개발에 관한 연구를 수행하였다. 본 연구에서는 암반의 강도에 따라 최적의 타격력을 제공하기 위해 근접센서를 이용해 암반 타격 시 피스톤의 하강 깊이를 측정하고 이를 통해 암반의 특성을 판별하여 타격력을 결정하는 피스톤 스트로크의 길이를 솔레노이드 밸브를 이용해 제어하였다. 다단 타격시스템을 위해 컨트롤러와 디스플레이/조작장치를 개발하였고, 무선통신을 이용하여 상호 정보교환이 가능하도록 하였다. 최종적으로 암반 강도에 따라 3단으로 타격할 수 있는 제어시스템을 개발하였고, 실차실험을 통해 이를 검증하였다.

• Structural Engineering and Mechanics
• /
• 제60권6호
• /
• pp.939-952
• /
• 2016

A compression to tensile load transforming (CTT) device was developed to determine indirect tensile strength of concrete material. Before CTT test, Particle flow code was used for the determination of the standard dimension of physical samples. Four numerical models with different dimensions were made and were subjected to tensile loading. The geometry of the model with ideal failure pattern was selected for physical sample preparation. A concrete slab with dimensions of $15{\times}19{\times}6cm$ and a hole at its center was prepared and subjected to tensile loading using this special loading device. The ratio of hole diameter to sample width was 0.5. The samples were made from a mixture of water, fine sand and cement with a ratio of 1-0.5-1, respectively. A 30-ton hydraulic jack with a load cell applied compressive loading to CTT with the compressive pressure rate of 0.02 MPa per second. The compressive loading was converted to tensile stress on the sample because of the overall test design. A numerical modeling was also done to analyze the effect of the hole diameter on stress concentrations of the hole side along its horizontal axis to provide a suitable criterion for determining the real tensile strength of concrete. Concurrent with indirect tensile test, the Brazilian test was performed to compare the results from two methods and also to perform numerical calibration. The numerical modeling shows that the models have tensile failure in the sides of the hole along the horizontal axis before any failure under shear loading. Also the stress concentration at the edge of the hole was 1.4 times more than the applied stress registered by the machine. Experimental Results showed that, the indirect tensile strength was clearly lower than the Brazilian test strength.