• 상하수도학회지
• /
• 제23권5호
• /
• pp.517-526
• /
• 2009

This research has been conducted to investigate the characteristics of hydraulic behavior within the PAC contactor, the rectangular shape sedimentation basin without inclined tube and the other one with inclined tube those are parts of demonstration plants(capacity : $2,000m^3/d$) in Korea Institute of Water and Environment. As results of tracer tests, the flow within PAC contactor was evaluated to divided into plug flow and dead space distinctly, and characteristics of dead space was close to that of CSTR(Complete/continuous Stirred Tank Reactor). Also, considering Reynolds number, Froude number, Morill, Modal, NCSTR Inex and plug flow/mixed flow fraction, in the case of the rectangular shape sedimentation basin without inclined tube, the characteristics of flow pattern was close to CSTR. On the other hand, in the case of the basin with inclined tube, the region of CSTR decreased precisely compared with the case of no-tube. Until now we have recognized that the inclined hydraulic structure just reduces the surface loading rate within a sedimentation basin. Actually besides, the inclined structure have an important effect on the hydraulic behavior within the basin.

• 터널과지하공간
• /
• 제24권4호
• /
• pp.325-333
• /
• 2014

대표적인 비재래에너지자원인 셰일가스 생산을 위해서는 수압파쇄가 핵심적인 기술이다. 암석의 취성도는 셰일가스 생산을 위한 수압파쇄 효율결정의 가장 중요한 물성 중 하나이며, 셰일의 취성도가 클수록 셰일가스 생산량이 증가하는 관계를 보인다. 암석의 취성은 다양하게 정의되며 표준화된 정의가 없어 혼란이 존재한다. 본 논문에서는 취성도의 다양한 개념들을 살펴보고 실내 실험값을 이용하여 취성도를 측정하고 각기 다르게 정의된 취성도간의 상관관계에 대해서 고찰해보았다. 일반적으로 일축압축강도와 인장강도의 비율로 나타내는 취성도와, 탄성계수와 포아송비를 이용한 취성도를 비교하였을 때 같은 암석에 대한 취성도 간에 매우 약한 양의 상관관계를 가지고 있는 것을 확인할 수 있었다. 또한 포아송비의 경우 취성도에 미치는 영향이 명확하지 않은 것으로 나타났다. 수압파쇄 결과를 예측하기 위한 지표로써 취성도를 적용하기 위해서는 취성도의 개념의 표준화가 필요한 것을 알 수 있다.

• Computers and Concrete
• /
• 제34권2호
• /
• pp.137-149
• /
• 2024

In order to study the triaxial mechanical behavior of steel fiber reinforced high performance concrete (SFRHPC), the standard triaxial compression tests with four different confining pressures are performed on the cylindrical specimens. Three different steel fiber volumes (0, 1% and 2%) are added in the specimens with diameter of 50 mm and height of 100 mm. Test results show that the triaxial compressive strength and peak strain increase with the increasing of fiber content at the same confining pressure. At the same steel fiber content, the triaxial compressive strength and peak strain increases with the confining pressure. The compressive strength growth rate declines as the confining pressure and steel fiber content increases. Longitudinal cracks are dominant in specimens with or without steel fiber under uniaxial compression loading. While with the confining pressure increases, diagonal crack due to shear is obvious. The Mohr-Coulomb criterion is illustrated can be used to describe the failure behavior, and the cohesive force increases as steel fiber content increases. Finally, the numerical model is built by using the PFC3D software. In the numerical model a index is introduced to reflect the effect of steel fiber content on the triaxial compressive behavior. The simulating stress-strain curve and failure mode of SFRHPC are agree well with the experimental results.

• 대한환경공학회지
• /
• 제38권1호
• /
• pp.25-33
• /
• 2016

본 연구에서는 수처리 공정에 적용하고 있는 CSTR 반응조를 대상으로 유입 유량이 다양하게 변동하는 경우 반응조 내부 수리 거동을 조사하고자 하였다. 유입 유량의 변동은 설계 유량 대비 10~100%까지 변화시켰으며, 각 경우를 CFD 기법을 이용하여 transient 상태의 추적자 실험을 모의하였으며, 모사 결과로부터 2차 정보를 추출하여 수리 거동 지표를 계산하여 유입 유량과 수리거동의 관계를 면밀히 조사하였다. 그 결과, 유입 유량이 증가할수록 Modal index와 ${\beta}$값이 증가하는 거동을 보였으며 Morrill index는 유입 유량과의 관계에서 국부적인 극소값을 가지는 유입 유량이 두 곳 나타났는데 각각 설계 유량의 20%되는 지점과 40%가 되는 지점이었다. 두 극소값이 나타나는 유입 유량보다 유량이 증가하면 다시 Morrill index가 증가하는 현상을 보여 이상적인 CSTR 반응조에 근접하는 것으로 나타났다.

• Geomechanics and Engineering
• /
• 제22권4호
• /
• pp.329-337
• /
• 2020

Polyacrylamide (PAM) possesses high water absorption capacity and a unique pH-dependent behavior that confer large potential to enhance the engineering performance of clays. In this study, calcium bentonite was treated with a nonionic PAM. Flexible-wall permeability test and the consolidation test were performed at different pH values to evaluate the effects of PAM treatment on the hydraulic and consolidation properties. Test results demonstrate that index properties are affected by the adsorbed PAM on clay surface: a decrease in specific gravity, a decrease in net zeta potential, and an increase in liquid limit are observed due to the PAM treatment. At a given pH, the compressibility of the treated clay is greater than that of the untreated clay. However, the compression indices of untreated and treated clays can be expressed as a single function of the initial void ratio, regardless of pH. Hydraulic conductivity is reduced by PAM treatment about 5 times at both neutral and alkaline pH conditions under similar void ratios, because of the reduction in size of the water flow channel by PAM expansion. However, at acidic pH, the hydraulic conductivity of the treated clay is slightly higher than the untreated clay. This reflects that the treated bentonite with PAM can be beneficially used in barrier system for highly alkaline residues.

• Geomechanics and Engineering
• /
• 제7권6호
• /
• pp.633-647
• /
• 2014

Biopolymers, polymers produced by living organisms, are used in various fields (e.g., medical, food, cosmetic, medicine) due to their beneficial properties. Recently, biopolymers have been used for control of soil erosion, stabilization of aggregate, and to enhance drilling. However, the inter-particle behavior of such polymers on soil behavior are poorly understood. In this study, an artificial biopolymer (${\beta}$-1,3/1,6-glucan) was used as an engineered soil additive for Korean residual soil (i.e., hwangtoh). The geotechnical behavior of the Korean residual soil, after treatment with ${\beta}$-1,3/1,6-glucan, were measured through a series of laboratory approaches and then analyzed. As the biopolymer content in soil increased, so did its compactibility, Atterberg limits, plasticity index, swelling index, and shear modulus. However, the treatment had no effect on the compressional stiffness of the residual soil, and the polymer induced bio-clogging of the soil's pore spaces while resulting in a decrease in hydraulic conductivity.

• Geomechanics and Engineering
• /
• 제18권3호
• /
• pp.299-313
• /
• 2019

This research investigated the nonlinear compressibility, permeability, the yielding due to structural degradation and their effects on consolidation behavior of structured soft soils. Based on oedometer and hydraulic conductivity test results of natural and reconstituted soft clays, linear log (1+e) ~ $log\;{\sigma}^{\prime}$ and log (1+e) ~ $log\;k_v$ relationships were developed to capture the variations in compressibility and permeability, and the yield stress ratio (YSR) was introduced to characterize the soil structure of natural soft clay. Semi-analytical solutions for one-dimensional consolidation of soft clay under time-dependent loading incorporating the effects of soil nonlinearity and soil structure were proposed. The semi-analytical solutions were verified against field measurements of a well-documented test embankment and they can give better accuracy in prediction of excess pore pressure compared to the predictions using the existing analytical solutions. Additionally, parametric studies were conducted to analyze the effects of YSR, compression index (${\lambda}_r$ and ${\lambda}_c$), and permeability index (${\eta}_k$) on the consolidation behavior of structured soft clays. The magnitude of the difference between degree of consolidation based on excess pore pressure ($U_p$) and that based on strain ($U_s$) depends on YSR. The parameter ${\lambda}_c/{\eta}_k$ plays a significant role in predicting consolidation behavior.

• 한국수자원학회논문집
• /
• 제52권spc2호
• /
• pp.855-863
• /
• 2019

어류의 어도 이용효율평가를 위해서는 유인효율과 통과효율로 분리하여 분석할 때, 각각의 효율을 증대시킬 수 있는 방향으로 어도 설치 및 관리 계획이 수립될 수 있다. 기 설치된 어도는 어류 모니터링을 통해 보다 직접적으로 각각의 효율을 평가할 수 있다. 반면 어도를 계획할 때, 또는 여건상 어류 모니터링이 어려운 경우, 수리해석을 통해 간접적으로 어도 효율을 평가할 수 있다. 본 연구에서는 어도의 효율평가가 가능한 수리해석 기법을 제시하였다. 유인효율 분석에는 어류 물리서식처 모듈이 장착된 River-2D모형을 사용하였고, 효율의 지표로 가중가용면적을 제안하였다. 통과효율 분석에는 자유 수면을 가지고 수리구조물상의 유체거동을 해석할 수 있는 3차원 모형(Flow-3D)을 해석 도구로 이용하였다. 그리고 덕천강 백곡보에 설치된 아이스하버 어도를 선택하여 어도 효율을 가늠해 보았고, 실제 어류 모니터링자료와 비교해 보았다. 그 결과 수리해석 자료를 정량적으로 어도 효율로 치환하기는 어렵지만, 대체적인 경향성 파악에는 도움을 줄 수 있었다.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2000년도 봄 학술발표회논문집
• /
• pp.271-276
• /
• 2000

Optimal neuro-control algorithm is extended to the control of a multi-degree-of-freedom structure. An active mass driver(AMD) system on the top roof used as a controller. The control signals are made by a multi-layer perceptron(MLP) which is trained by minimizing a sub-optimal performance index. The performance index is a function of both the output responses and the control signals. Structure having nonlinear hysteretic behavior is also trained and controlled by using proposed control algorithm. Bothe the time delay effect and the dynamics of hydraulic actuator are included in the simulation. Example shows that optimal neuro-control algorithm can be applicable to the multi-degree of freedom structures.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2000년도 춘계학술대회논문집
• /
• pp.286-290
• /
• 2000

Optimal neuro-control algorithm is extended to the control of a multi-degree-of-freedom structure. An active mass driver(AMD) system on the top roof is used as an exciter. The control signals are made by a multi-layer perceptron(MLP) which is trained by minimizing a sub-optimal performance index. The performance index is a function of both the output responses and the control signals. Structure having nonlinear hysteretic behavior is also trained and controlled by using proposed control algorithm. In training neuro-controller, emulator neural network is not used. Instead, sensitivity-test data are used. Therefore, only one neural network is used for the control system. Both the time delay effect and the dynamics of hydraulic actuator are included in the simulation. Example shows that optimal neuro-control algorithm can be applicable to the multi-degree of freedom structures.