• Journal of the Korea institute for structural maintenance and inspection
• /
• v.20 no.3
• /
• pp.66-74
• /
• 2016

The aim of this research work is to investigate the mix proportion of multi-component cement incorporating ground granulated blast furnace(GGBFS), fly ash(FA) and silica fume(SF) as an addition to cement in ternary and quaternary combinations. The water-binder ratio was 0.45. In this study, 50% and 60% replacement ratios of mineral admixture to OPC was used, while series of combination of 20~40% GGBFS, 5~35% FA and 0~15% SF binder were used for fundamental characteristics tests. This study concern the GGBFS/FA ratio and SF contents of multi-component cement including the compressive strength, water absorptions, ultrasonic pulse velocity(UPV), drying shrinkage and X-ray diffraction(XRD) analysises. The results show that the addition of SF can reduce the water absorption and increase the compressive strength, UPV and drying shrinkage. These developments in the compressive strength, UPV and water absorption can be attributed to the fact that increase in the SF content tends basically to consume the calcium hydroxide crystals released from the hydration process leading to the formation of further CSH(calcium silicate hydrate). The strength, water absorption and UPV increases with an increase in GGBFS/FA ratios for a each SF contents. The relationship between GGBFS/FA ratios and compressive strength, water absorption, UPV is close to linear. It was found that the GGBFS/FA ratio and SF contents is the key factor governing the fundamental properties of multi-component cement.

• Journal of the Korea Concrete Institute
• /
• v.21 no.5
• /
• pp.557-563
• /
• 2009

This study is on the properties of inorganic porous calcium silicate material made from silica powder through the autoclaving curing, the results of this study should be utilized fundamental data for the development of noise reduction porous solid material using siliceous byproduct generated by various manufacture process. For the manufacture of autoclave curing specimen, various calcareous materials used and siliceous materials used silica powder. In this study, properties in density and compressive strength according to the change of W/B and C/S ratio, microscopy for the shape of pore, SEM and XRD for the examination of hydrate after autoclave curing are carried out respectively. The test results shown that the more slurry density decrease, the more W/B increase at the fresh state, this tendency shown similar to in hardened state. Among the specimens of C/S ratio, the compressive strength of C/S ratio of 0.85 gave the highest the compressive strength. In the results of XRD, tobermorite generated by autoclaving curing was created all of specimens regardless of C/S ratio. To ascertain pore structure, we compared with existing porous calcium silicate product(ALC, organic sound absorbing porous material). The results of microscope observation, pore structure of specimen of this study was similar to that of existing inorganic sound absorbing foam concrete. therefore, we could conformed a possibility of sound absorbing porous solid material on the basis of the results.

• Journal of the Korean Wood Science and Technology
• /
• v.28 no.4
• /
• pp.41-50
• /
• 2000

Cement-bonded particleboard is being used as outdoor siding material all over the world, because this composite particularly bears a light weight, high resistance against fire, decay, and crack by cyclic freezing and thawing, anti-shock property, and strength enhancement. Construction systems are currently changing into a frame-building style and wooden houses are being constructed with prefabrication type. Therefore, they require a more durability at outdoor-exposed sides. In this study, the cement hydration property for Korean pine particle, Japanese larch particle and face- and middle layer particles (designated as PB particle below) used in Korean particleboard-manufacturing company was investigated, and the rapid manufacturing characteristics of cement-bonded particleboard by supercritical $CO_2$ curing was evaluated. Korean pine flour showed a good hydration property, however, larch flour showed a bad one. PB particle had a better hydration property than larch flour. The addition of $Na_2SiO_3$ indicated a negative effect on hydration, however, $MgCl_2$ had a positive one. Curing by supercritical $CO_2$ fluid gave a conspicuous enhancement in the performances of cement-bonded particleboards compared to conventional curing. $MgCl_2$ 3%-added PB particle had the highest properties, and $MgCl_2$ 1%-added Korean pine particle had the second class with the conditions of cement/wood ratio of 2.7, a small fraction-screened particle and supercritical curing. On the contrary, the composition of non-hammermilled or large fraction-screened particle at cement/wood ratio of 2.2 was poorer. Also, the feasibility for actual use of 3%-added, small PB particle-screened fraction was greatest of all the conventional curing treatments. Relative superiority of supercritical curing vs. conventional curing at dimensional stability was not so apparent as in strength properties. Through the thermogravimetric analysis, it was ascertained that the peak of a component $CaCO_3$ was highest, and the two weak peaks of calcium silicate hydrate and ettringite and $Ca(OH)_2$ were present in supercritical treatment. Accordingly, it was inferred that the increased formation of carbonates in board contributes to strength enhancement.

• The Korean Journal of Quaternary Research
• /
• v.25 no.2
• /
• pp.17-24
• /
• 2011

We investigated the variation of $CaCO_3$ contents in cores PC1 and PC2 recovered from the continental slope area of the Ulleung Basin in the East Sea. $CaCO_3$ contents of cores PC1 and PC2 varied between 0.6 and 17.2% and between 0.3 and 43.0%, respectively. $CaCO_3$ contents in the upper part of core PC1 corresponding to MIS 1 are less than 5%, whereas those in the lower part of MIS 2 are more than 10%. Such variation of $CaCO_3$ contents in core PC1 confirms the previous results of $CaCO_3$ studies in the East Sea. In core PC2, $CaCO_3$ contents of the upper part are similar to those of core PC1. However, $CaCO_3$ contents in the lower part of core PC2 are more than 40%. According to XRD operation and SEM examination, the high $CaCO_3$ contents in the lower part of core PC2 are more attributable to the authigenic carbonate minerals rather than the biogenic carbonate composition. Such abundant authigenic carbonate minerals are closely related to the dissociation of methan hydrates which were observed in the Ulleung Basin.

• Applied Chemistry for Engineering
• /
• v.8 no.6
• /
• pp.914-919
• /
• 1997

On the basis of theory of Bratsch's electronegativity equalization, the electronegativity equalization, the group electronegativities and the group partial charges for anionic and nonionic surfactants could be calculated by using Pauling's electronegativity parameters. From calculated results, we have investigated how CMC, hydrophilic and hydrophobic groups, group partial charge, electronegativity of hydrophilic and hydrophobic groups, structural stability of micelle for anionic and nonionic surfactants are related. It was fround that CMC depends upon group partial charge and group electronegativity of hydrophilic and hydrophobic groups of surfactants. For the anionic surfactants, negative partial charge in hydrophobic group is delocalized as the carbon number in hydrophobic group increase. So negative partial charge of hydrophilic group has very large electronegativity that is decreased. And CMC decreases as hydration ability of hydrophilic groups which decreases relatively. For the nonionic surfactant, partial charge and electronegativity in hydrophobic group increases with the increment of carbon number in hydrophobic group. And CMC decreases because electronegativity of hydrophilic group is decreased with the increment of electronegativity of hydrophilic group. However, with the increase of repeating units in hydrophilic group, the negative partial charge of hydrophilic group increases. So CMC increases because surfactants hydrate rather than form micelles in aqueous solution by the increase of hydration ability.

• Applied Chemistry for Engineering
• /
• v.5 no.4
• /
• pp.597-608
• /
• 1994

A new process for the production of high purity ${\alpha}-Al_2O_3$ from ammonium aluminium sulfate solution abtained through the sulfation of low grade bauxite ore with $(NH_4)_2SO_4$, and leaching of the sulfated product was investigated. This process is consisted of solvent extraction for Fe component removal from ammonium aluminum sulfate solution and homogeneous precipitation of Al containing precipitate from the refined ammonium aluminium sulfate solution by using urea as precipitator. The optimum conditions of solvent extraction with Alamine 336 as extractant were shaking time of 4min, organic phase ratio to aqueous phase of 0.25. The types of precipitation products from this precipitation were amorphous alumina gel, pseudo-boehmite and crystalline boehmite in the lower temperature of $100^{\circ}C$, in the range from $125^{\circ}C$ to $150^{\circ}C$, and above $150^{\circ}C$, respectively. And also amorphous alumina gel hydrate in $1000^{\circ}C$ and crystalline boehmite in $1250^{\circ}C$ were tranfered to ${\alpha}-Al_2O_3$, respectively. This alumina was identified as ${\alpha}-Al_2O_3$ of purity 99.7%.

• Korean Journal of Food Science and Technology
• /
• v.35 no.1
• /
• pp.1-6
• /
• 2003

Chemical compositions of several herbs (rosemary, mint, thyme, sage, and lavender) cultivated in Korea were analyzed. Approximate compositions were as follows: moisture $69.92{\sim}82.10%$, crude ash $2.48{\sim}6.15%$, crude fat $0.40{\sim}2.46%$, crude protein $0.84{\sim}1.57%$, and crude fiber $2.48{\sim}6.15%$. Total contents of phenolics determined by Folin-Dennis's method were in the range of $73.24{\sim}197.79mg%$. Contents of minerals, Na, Ca, Mn, P, Mg, Zn, and Fe determined by ICP-AES were $43.0{\sim}112.5,\;177.5{\sim}304.0,\;0.5{\sim}1.5,\;74.0{\sim}218.5,\;57.0{\sim}116.0,\;1.0{\sim}2.0$ and $3.0{\sim}5.0mg%$, respectively. Free sugar contents determined by HPLC were: sucrose $0{\sim}7.61$, glucose $0.94{\sim}15.92$, and rhamnose $0.64{\sim}7.99mg%$. Fatty acids including palmitic, stearic, oleic, linoleic, linolenic, and arachidonic acids were identified by GC. Linoleic and linolenic acid contents were higher than those of palmitic and stearic acids. Aroma components identified by GC-MS were 1,8-cineole, ${\alpha}-phellandrene,\;{\alpha}-terpinene,\;{\beta}-pinene,\;{\beta}-thujone$, borneol, butan-1-ol, cis-sabinene hydrate, ${\delta}-carene,\;{\gamma}-terpinene$, and verbenone.

• Journal of the Korean GEO-environmental Society
• /
• v.9 no.5
• /
• pp.5-13
• /
• 2008

In this study, It was carried out to evaluate the feasibility of recycled crushed concrete as aggregate used cement mortar replace sand and to investigate engineering properties of recycled aggregate for hazardous waste solidification. The compressive strength of cement mortar replaced 5-15% (wt.) recycled aggregate was over $163kgf/cm^2$ which is the standard of first grade concrete block class C. And cement mortar was examined to evaluate the stability by leaching test. Cu, Cd, Pb, Cr, and As as the heavy metals were proved very stable but mercury (Hg) was leached high concentration because it was simply tied to the cement surface. We investigated the crystal structures of cement mortar and they had shown the peaks of $Ca(OH)_2$, ettringite, and CSH (calcium silicate hydrate). As the result, the longer curing time, the higher CSH peak that means to increase compressive strength and the cement mortar was more stable. Therefore it was shown that it may be possible to apply hazardous waste solidification using recycled aggregate, fly ash and sewage sludge ash.

• Geophysics and Geophysical Exploration
• /
• v.20 no.2
• /
• pp.78-87
• /
• 2017

For efficient data processing, trace interpolation and regularization techniques should be antecedently applied to the seismic data which were irregularly sampled with missing traces. Among many interpolation techniques, MWNI (Minimum Weighted Norm Interpolation) technique is one of the most versatile techniques and widely used to regularize seismic data because of easy extension to the high-order module and low computational cost. However, since it is difficult to interpolate spatially aliased data using this technique, model-constrained MWNI was suggested to compensate for this problem. In this paper, conventional MWNI and model-constrained MWNI modules have been developed in order to analyze their performance using synthetic data and validate the applicability to the field data. The result by using model-constrained MWNI was better in spatially aliased data. In order to verify the applicability to the field data, interpolation and regularization were performed for two field data sets, respectively. Firstly, the seismic data acquired in Ulleung Basin gas hydrate field was interpolated. Even though the data has very chaotic feature and complex structure due to the chimney, the developed module showed fairly good interpolation result. Secondly, very irregularly sampled and widely missing seismic data was regularized and the connectivity of events was quite improved. According to these experiments, we can confirm that the developed module can successfully interpolate and regularize the irregularly sampled field data.

• Journal of Sasang Constitutional Medicine
• /
• v.15 no.1
• /
• pp.72-89
• /
• 2003

To elucidate the neuroprotective effect of Yeoldahanso-tang(YHT) on nerve cells damaged by hypoxia, the cytotoxic effects of exposure to hypoxia were determined by XTT(SODIUM3,3'-{I-[(PHENYLAMINO) CARBONYL]-3,4-TETRAZOLIUM}- BIS (4-METHOXY-6-NITRO) BENZENE SULFONIC ACID HYDRATE), NR(Neutral red), MTT(3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide) and SRB(Sulforhodamin B) asssay. The activity of catalase and SOD(Superoxide dismutase) was measured by spectrophometry, and $TNF-{\alpha}$(Tumor cell necrosis $fector-{\alpha}$) and PKC(Protein kinase C) activity was measured after exposure to hypoxia and treatment of YHTWE. Also the neuroprotective effect of YHTWE was researched for the elucidatioion of neuroprotective mechanism. The results were as follows; 1. Hypoxia decreased cell viability measured by XTT, NR assay when cultured cerebral neurons were exposed to 95% N2/5% CO2 for $2{\sim}26$ minutes in these cultures and YHTWE inhibited the decrease of cell viability. 2. H2O2 treatment decreased cell viability measured by MTT, and SRB assay when cultured cerebral neurons were exposed to 1-80 ${\mu}M$ for 6 hours, but YHTWE inhibited the decrease of cell viability. 3. Hypoxia decreased catalase and SOD activity, and also $TNF-{\alpha}$ and PKC activity in these cultured cerebral neurons, but YHTWE inhibited the decrease of the catalase and SOD activity in these cultures. 4. Hypoxia triggered the apoptosis via caspase activation and internucleosomal DNA fragmentation. Also hypoxia stimulate the release of cytochrome c forom mitochondria. YHTWE inhibited the apoptosis via caspase activation induced by hypoxia. From these results, it can be suggested that brain ischemia model induced hypoxia showed neurotoxicity on cultured mouse cerebral neurons, and the YHTWE has the neuroprotective effect in blocking the neurotoxicity induced by hypoxia in cultured mouse cerebral neurons.