• Journal of Electrical Engineering and Technology
• /
• v.13 no.5
• /
• pp.1917-1926
• /
• 2018

In view of the current state of the reserves of electric energy generated resources and the share of electric motors in electricity consumption, many researches and studies related to efficiency in electric motors are being made. The presented work is related to the Axial Flux Permanent Magnet Synchronous Motor (AF-PMSM), which has recently undergone significant work based on the development of magnet and motor technology. In this study, a novel AF-PMSM was designed analytically through Finite Element Method (FEM) which can be started by connecting to a line such as an asynchronous motor in a transient state and can operate with high efficiency and power factor after synchronization in steady state without the need for an expensive motor drive. According to the obtained FEM results, a design with an efficiency class of IE4 of 5.5 kW shaft power, a 4 poles motor was obtained. As a result, economic calculations indicate that the extra cost of the designed Line start AF-PMSM with respect to the asynchronous motor is rapidly compensated by energy saving due to a more efficient operation, especially constant speed operations. As a result of the analysis obtained, the targeted values are reached. For induction motors and radial flux permanent magnet synchronous motors, a good alternative motor that can operate with high efficiency and power factor has been obtained.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.13 no.6
• /
• pp.2964-2985
• /
• 2019

Global data center IP traffic is expected to reach 20.6 zettabytes (ZB) by the end of 2021. Intra-data center networks (Intra-DCN) will account for 71.5% of the data center traffic flow and will be the largest portion of the traffic. The understanding of traffic distribution in IntraDCN is still sketchy. It causes significant amount of bandwidth to go unutilized, and creates avoidable choke points. Conventional transport protocols such as Optical Packet Switching (OPS) and Optical Burst Switching (OBS) allow a one-sided view of the traffic flow in the network. This therefore causes disjointed and uncoordinated decision-making at each node. For effective resource planning, there is the need to consider joining the distributed with centralized management which anticipates the system's needs and regulates the entire network. Methods derived from Kalman filters have proved effective in planning road networks. Considering the network available bandwidth as data transport highways, we propose an intelligent enhanced SDN concept applied to OBS architecture. A management plane (MP) is added to conventional control (CP) and data planes (DP). The MP assembles the traffic spatio-temporal parameters from ingress nodes, uses Kalman filtering prediction-based algorithm to estimate traffic demand. Prior to packets arrival at edges nodes, it regularly forwards updates of resources allocation to CPs. Simulations were done on a hybrid scheme (1+1) and on the centralized OBS. The results demonstrated that the proposition decreases the packet loss ratio. It also improves network latency and throughput-up to 84 and 51%, respectively, versus the traditional scheme.

• Journal of English Language & Literature
• /
• v.56 no.2
• /
• pp.187-217
• /
• 2010

By reading the main character, Rene Gallimard, in M. Butterfly as a spatial metaphor of America, this article examines how homogeneous American national identity of heterosexuality and white masculinity has been reinforced since the cold war and has constituted a crisis of hegemony with the decline of imperialism and how its pathological symptom is shown through the melancholic suicide of Gallimard. This article also argues how the feminine attributes implied in race, gender and sexuality in M. Butterfly are designated and allegorized as an impure, contaminated and ahistorical marker of national integrity in pthe social and material status of the heterosexual American white male. To develop my argument, I read M. Butterfly from a psychoanalytic point of view. Therefore I depend on Freud, Lacan, and Bhabha's psychoanalysis as the theoretical basis. In this paper, I also argue that the homogenized and fixed national identity is splitted and collapsed from within as shown in the Gallimard's melancholy and in the process of splitting the "Third Space" of hybrid subjects for the marginal and the emergent like Song Liling, a homosexual Asian man, can be built "from a space in-between." Therefore Hwang calls into questions conventions of fixed, essentialist identities through the shifting gender identities between Song and Gallimard in M. Butterfly and how identities in the plural are constructed variously in throughly historicized, politicized situations, and these constructions can be complicated by relations of power.

• Journal of Digestive Cancer Research
• /
• v.5 no.1
• /
• pp.23-27
• /
• 2017

Although laparoscopic pancreaticoduodenectomy (LPD) is considered as minimally invasive surgery, an advanced level of laparoscopic skill is still required. LPD comprises various procedures including reconstruction. Therefore, establishment of a safe approach at each step is needed. Prevention of intraoperative bleeding is the most important factor in safe completion of LPD. The establishment of effective retraction methods is also important at each site to prevent vascular injury. I also recommend the "uncinate process first" approach during initial cases of LPD, in which the branches of the inferior pancreaticoduodenal artery are dissected first, at points where they enter the uncinate process. This approach is performed at the left side of the superior mesenteric artery (SMA) before isolating the pancreatic head from the right aspect of the SMA, which allows safe dissection without bleeding. Safe and reliable reconstruction is also important to prevent postoperative complications. Laparoscopic pancreatojejunostomy requires highly skilled suturing technique. Pancreatojejunostomy through a small abdominal incision, as in hybrid-LPD, facilitates reconstruction. In LPD, the surgical view is limited. Therefore, we must carefully verify the position of the pancreaticobiliary limb. A twisted mesentery may cause severe congestion of the pancreaticobiliary limb following reconstruction, resulting in severe complications. We must secure the appropriate position of the pancreaticobiliary limb before starting reconstruction. We describe the incidence of intraoperative and postoperative complications and appropriate technique for safe performance of LPD.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.39 no.4
• /
• pp.49-59
• /
• 2011

This study is a reinterpretation of characteristics of public space in contemporary cities with a view to liminal space. The conditions of pubic space now cannot be captured through the existing discourses of publicness, and public space. The basic premise of the study is that the idea of liminal space or liminality is useful to grasp the fluid and hybrid attribute of public space in contemporary cities. Liminal space, originally from anthropological studies, is the intermingled stage between two realms and the sustained period of the ritual. The idea has been widely used for various cultural phenomenon and spatial experiences. A literature review on public space and liminal space was carried out. Cases pertaining to public space with a view to liminal space were examined and discussed in detail. Through the careful reading of several public spaces with an angle toward liminal space, the new perspective toward public space will be drawn out. First, we need to emphasize the fluid spectrum of public space rather than the serial stage such as the public, the semi-public, the semi-private, and the private. Second, the idea will contribute to understanding the flexible state depending upon time. What we can learn from case studies is the volatile characteristics in public space as a common phenomenon support its vitality. This interpretation will contribute to the perception of a new horizon of public space. The nature of public space is unpredictable and free. In reality, the spectrum of public space will expand and fluctuate. Ironically, public space can be vitalized through enhancing and activating the private space. The intimate and complicated interface between the two realms is a key issue. The boundary of public space might be redefined to embrace the flexible the fragile nature of changing public space. These research implications will guide the thoughtful design and management of pubic space.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.25 no.4
• /
• pp.245-250
• /
• 2005

This experiment was conducted to compare the frech and dry matter yields and feed values of Sorghum$\times$Sudangrsss Hybrid in accordance with different nitrogen and potassium fertilizer sources at the Dae-Ho reclaimed tidal land, Korea from 2003 to 2004. Soil salt contents of ammonium sulfate plots(T3, T4, T5) were higher than that of the urea plot(T2), but that of potassium sulfate plot(T6) was the lowest. The fresh yields of ammonium sulfate plots(T3, T4, T5) and potassium sulfate plot(T6) were higher than that of the urea plot(T2) as $173\%,\;173\%,\;144\%\;and\;90\%$. respectively. The dry matter and total digestible nutrient(TBN) yields were similar tendency like the results of the fresh matter yields. The crude protein(CP), neutral detergent fiber(NDF) and acid detergent fiber(ADF) contents of ammonium sulfate plots(T3, T4, T5) were higher than those of urea plot(T2), but those of potassium sulfate plot(T6) were the lowest. On the other hand, TDN content in potassium sulfate plot(T6) was the highest. It was desirable to use ammonium sulfate$(20\~30kg\;N/10a)$ and potassium sulfate fertilizer$(15kg\;K_2O/10a)$ than those of urea and potassium chloride fertilizer on reclaimed tidal land in view of forage production and its feed value.

• Journal of Intelligence and Information Systems
• /
• v.23 no.4
• /
• pp.77-110
• /
• 2017

Recently, the diversification and individualization of consumption patterns through the web and mobile devices based on the Internet have been rapid. As this happens, the efficient operation of the offline store, which is a traditional distribution channel, has become more important. In order to raise both the sales and profits of stores, stores need to supply and sell the most attractive products to consumers in a timely manner. However, there is a lack of research on which SKUs, out of many products, can increase sales probability and reduce inventory costs. In particular, if a company sells products through multiple in-store stores across multiple locations, it would be helpful to increase sales and profitability of stores if SKUs appealing to customers are recommended. In this study, the recommender system (recommender system such as collaborative filtering and hybrid filtering), which has been used for personalization recommendation, is suggested by SKU recommendation method of a store unit of a distribution company that handles a homogeneous brand through a plurality of sales stores by country and region. We calculated the similarity of each store by using the purchase data of each store's handling items, filtering the collaboration according to the sales history of each store by each SKU, and finally recommending the individual SKU to the store. In addition, the store is classified into four clusters through PCA (Principal Component Analysis) and cluster analysis (Clustering) using the store profile data. The recommendation system is implemented by the hybrid filtering method that applies the collaborative filtering in each cluster and measured the performance of both methods based on actual sales data. Most of the existing recommendation systems have been studied by recommending items such as movies and music to the users. In practice, industrial applications have also become popular. In the meantime, there has been little research on recommending SKUs for each store by applying these recommendation systems, which have been mainly dealt with in the field of personalization services, to the store units of distributors handling similar brands. If the recommendation method of the existing recommendation methodology was 'the individual field', this study expanded the scope of the store beyond the individual domain through a plurality of sales stores by country and region and dealt with the store unit of the distribution company handling the same brand SKU while suggesting a recommendation method. In addition, if the existing recommendation system is limited to online, it is recommended to apply the data mining technique to develop an algorithm suitable for expanding to the store area rather than expanding the utilization range offline and analyzing based on the existing individual. The significance of the results of this study is that the personalization recommendation algorithm is applied to a plurality of sales outlets handling the same brand. A meaningful result is derived and a concrete methodology that can be constructed and used as a system for actual companies is proposed. It is also meaningful that this is the first attempt to expand the research area of the academic field related to the existing recommendation system, which was focused on the personalization domain, to a sales store of a company handling the same brand. From 05 to 03 in 2014, the number of stores' sales volume of the top 100 SKUs are limited to 52 SKUs by collaborative filtering and the hybrid filtering method SKU recommended. We compared the performance of the two recommendation methods by totaling the sales results. The reason for comparing the two recommendation methods is that the recommendation method of this study is defined as the reference model in which offline collaborative filtering is applied to demonstrate higher performance than the existing recommendation method. The results of this model are compared with the Hybrid filtering method, which is a model that reflects the characteristics of the offline store view. The proposed method showed a higher performance than the existing recommendation method. The proposed method was proved by using actual sales data of large Korean apparel companies. In this study, we propose a method to extend the recommendation system of the individual level to the group level and to efficiently approach it. In addition to the theoretical framework, which is of great value.

• Composites Research
• /
• v.30 no.2
• /
• pp.158-164
• /
• 2017

The fiber metal laminate is a type of hybrid materials laminated thin metallic sheets with fiber reinforced plastic sheets. The laminate has been researched or applied in automotive and aerospace industries due to their outstanding impact absorbing performance in view of light weight aspect. Specially, the replacement of side-impact beam as the fiber reinforced plastic has been researched actively. The objective of this paper is the primitive investigation in the development of side-door impact beam using the fiber metal laminate. First, the three-point bending simulations were conducted to decide the shape of impact beam using the numerical analysis. Next, two cases impact beam (pure DP 980 and fiber metal laminate) were installed in the side-door, and then the bending tests (according to FMVSS 214S) were simulated using the numerical analysis. It is noted that the side-door impact beam can be replaced with the fiber metal laminate sufficiently based on the numerical analysis results.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.15 no.1
• /
• pp.52-60
• /
• 1995

This experiment was carried out to determine the effect of nitrogen application level of cattle sluny(T1:150, T3:250, T53.50 kglha) and chemical fertilizer(T2:150, T4:250, T6:350 kg/ha) on the growth characteristics, dry matter yield and chemical soil property of Sorghum-Sudangrass hybrid [Sorghum bicolor L. Moench]. The results obtained are summarized as follows: Mean stem diameter was significantly increased by increasing nitrogen application level of cattle slurry and chemical fertilizer. Especially, T6 treatment was the highest as 11.1 mm, while T1 treatment w a the lowest as 0.3 mrn. According to the same level of nitrogen application, cattle slurry treaunent(T1, T3 and T5) were showed a lower mean stem hardness than chemical fertilizer treatment(T2, T4 and T6). Especially, T3 treatment was the softest at 0.7 kg/$cm^2$. The dead stubble and tiller number were increased by increasing nitrogen level of cattle slurry and chemical fertilizer(P

• Journal of Broadcast Engineering
• /
• v.18 no.2
• /
• pp.261-270
• /
• 2013

A stereoscopic 3D video service is able to provide a 3D video service while keeping backward compatibility with the existing 2D video service. In the terrestrial digital television (DTV) system, a stereoscopic video codec is required to have high coding efficiency in order to provide a 3D video service in the same channel capacity. A hybrid codec consisting of MPEG-2 for base video and H.264/AVC or HEVC for 3D auxiliary video is considered. Furthermore, Non-Real-Time (NRT) delivery of stereoscopic video is also considered as a service scenario for 3DTV services to overcome the limited bandwidth. In this paper, we propose a stereoscopic video coding scheme using adaptive loop filter (ALF) which had been considered in HEVC as a pre-/post-filter for enhancing coding efficiency in NRT-based 3DTV services. In order to apply ALF as a post-filter to the reconstructed additional view coded by H.264/AVC, we devise a method in which ALF is adaptively applied based on a structure determined by using macroblock (MB) coding information such as MB mode type and reference index instead of coding unit (CU) structure on which ALF is applied in the HEVC. Experimental results shows that the proposed stereoscopic video coding scheme applying ALF obtains up to 24.9% gain of bit saving.