• 전력전자학회논문지
• /
• 제18권1호
• /
• pp.45-53
• /
• 2013

Fuel cell power system is one of the most promising energy source for the alternative energy because it has unique advantages such as high energy density, no power drop during operation, and feasible to make compact size. However, due to very low response time, fuel cell is difficult to correspond to drastic load changes and start-up operation. For solving these problem, fuel cell power system must include energy storage device such as Li-Poly battery or super capacitor. Therefore, bi-directional DC-DC converter must be required for this storage device and fuel cell-PCS control. This paper presents a design and modeling of the bi-directional DC/DC converter. Firstly, we present modeling the boost and buck mode of the bi-directional converter through both PWM switch model and state space averaging technique. Secondly, in order to minimize output ripple and transient response overshoot, we have two identical DC-DC converters interleaved and adopt two-loop voltage-current controller. The proposed bi-directional DC-DC converter's modeling method and control design have been verified with computer simulation and experimentation.

• 한국정보통신학회논문지
• /
• 제23권8호
• /
• pp.923-929
• /
• 2019

자율운항선박의 기반은 추진시스템의 안정성이 중요하며, 추진체계의 안정성을 위하여 다중 발전 체계 및 추진체계를 갖추어야한다. 기존 선박에서는 안정성을 위하여 높은 발전 용량을 산정하며, 그 결과 저부하 운전으로 인한 경제성 하락을 야기한다. 이를 해결하기 위해서는 전력체계의 최적화를 통하여 발전 체계의 경량화와 효율의 증가가 필요하다. 본 논문에서는 전기추진선박용 OPMS(Optimization Power Management System)를 구축한다. OPMS는 하이브리드형 발전시스템, 에너지저장시스템, 부하제어시스템으로 구성된다. 발전시스템은 이중연료엔진, 에너지저장시스템은 배터리, 부하제어시스템은 추진 부하, 상용 부하, 불규칙 부하, 화물 기기 관련 부하, 갑판 부하로 구성된다. 각 시스템별 기기들의 특성에 대하여 모델링하여 전력체계를 구축하였다. 실험을 위하여 선박 운용에 따른 시나리오를 작성하고 안정성 및 경제성을 기존의 전기추진선박과 비교하였다. 실험의 결과 발전기의 비교적 적은 시간 투입으로 같은 전력량을 공급함으로써 선박의 LNG 1.3%, Main Fuel 0.3%, Pilot Fuel 35.1%의 연료소모량 감소를 통하여 경제성 및 안정성을 확인하였다.

• 대한의용생체공학회:의공학회지
• /
• 제28권6호
• /
• pp.768-776
• /
• 2007

A new type of the fluid circulation blood pressure simulator was proposed to enhance the blood pressure simulator used for the development and evaluation of automatic sphygmomanometers. Various pressure waveform of fluid flowing in the pipe was reproduced by operating the proportional control valve after applying a pressure on the fluid in pressurized oil tank. After that, appropriate fluid was supplied by operating the proportional control valve, which enabled to reproduce various pressure wave of the fluid flowing in the tube. To accomplish this work, the mathematical model was carefully reviewed in cooperating with the proposed simulator. After modeling the driving signal as input signal and the pressure in internal tube as output signal, the simulation on system parameters such as internal volume, cross-section of orifice and supply pressure, which are sensitive to dynamic characteristic of system, was accomplished. System parameters affecting the dynamic characteristic were analyzed in the frequency bandwidth and also reflected to the design of the plant. The performance evaluator of fluid dynamic characteristic using proportional control signal was fabricated on the basis of obtained simulation result. An experimental apparatus was set-up and measurements on the dynamic characteristic, nonlinearity, and rising and falling response was carried out to verify the characteristic of the fluid dynamic model. Controller was designed and thereafter, simulation was performed to control the output signal with respect to the reference input in the fluid dynamic model using the proposed proportional control valve. Hybrid controller combined with an proportional controller and feed-forward controller was fabricated after applying a disturbance observer to the control plant. Comparison of the simulations between the conventional proportional controller and the proposed hybrid simulator indicated that even though the former showed good control performance.

• 전력전자학회논문지
• /
• 제13권5호
• /
• pp.360-368
• /
• 2008

하이브리드 전기자동차용 리튬이온 배터리 시스템의 모델링 및 모델기반 상태 관측기 설계에 관한 연구를 수행하였다. 배터리의 동적 특성을 모사하기 위한 모델은 전기적 등가회로로 단순화하여 제안하였다. 모델 파라미터는 최소 자승 이론에 의거 다양한 운전조건에 따라 추정하였고, 실험 검증하였다. 검증된 모델을 기반으로 하는 비례-적분(PI) 제어의 상태 관측기를 구성하였고, 제어 이득 선정방법을 제안하였다. 제안된 상태 관측기의 강인성은 시뮬레이션 및 실험에 의거 다양한 운전조건 변동에 따른 민감도를 분석하여 검증하였다.

• 한국정밀공학회지
• /
• 제33권3호
• /
• pp.235-242
• /
• 2016

The purpose of this study is an attempt to improve the functionality of a conventional Fused Deposition Modeling (FDM) process using the Automatic Tool Changer (ATC) to perform multimaterial production and post-processing. Hybrid-FDM means a fusion of an Additive Manufacturing process and grinding process using the ATC system. In order to enhance the potentiality of production capacity for multi-material fabrication and surface roughness improvement, two extrusion tools and one grinding tool system are suggested. A pneumatic chuck is attached on a moving platform in the XY axes plane and an extrusion head and grinding head are placed in a docking station, allowing for a quick changeover with each other. Therefore, the manufacturing lead time can be reduced efficiently for the fabrication of a product.

• 제어로봇시스템학회논문지
• /
• 제11권7호
• /
• pp.602-608
• /
• 2005

In the virtual environment, force feedback to the human operator makes virtual experiences more realistic. To ensure the safe operation and enhance the haptic feeling, stability should be guaranteed. Both motors and brakes are commonly used for haptic devices. Motors can generate a torque in any direction, but they can make the system active during operation, thus leading to instability. Brakes can generate a torque only against their rotation, but they dissipate energy during operation, which makes the system intrinsically stable. Consequently, motors and brakes are complementing each other. In this research, a two degree-of-freedom (DOF) haptic device equipped with motors and brakes has been developed to provide better haptic effects. Each DOF is actuated by a pair of motor and brake. Modeling of the environment and the control method are needed to utilize both actuators. Among various haptic effects, contact with the virtual wall, representation of friction and representation of plastic deformation have been investigated extensively in this paper. It is shown that the hybrid haptic device is more suited to some applications than the motor-based haptic device.

• 한국강구조학회 논문집
• /
• 제25권3호
• /
• pp.307-320
• /
• 2013

기존 해상풍력발전 지지구조물의 단점을 보완한 신형식의 파일 기초 하이브리드 지지구조물을 본 연구에서 제안하였다. 이 지지구조는 콘크리트 자중을 이용한 중력식 기초의 개념으로부터 수정되어 4개의 파일로 지지되며, 강재 샤프트와 원추형 콘크리트가 결합된 하이브리드 형식이다. 규모가 크고 두꺼운 콘크리트의 3차원 해석을 위해, 정확한 기하형상 모델링과 응력의 절점 보간이 가능한 솔리드-쉘 입체요소를 개발하였다. 해양구조물 전용 유한요소 프로그램인 XSEA에 탑재된 솔리드-쉘 요소와 Stream Function 파랑 이론을 적용하여, 제안한 하이브리드 지지구조물에 대해 서남해안 지역의 환경조건을 적용한 준정적 해석 및 고유진동수 해석을 실시하였다. 해석결과, 수평변위가 허용변위 이내로 나타났고, 고유진동수 해석을 통해 하이브리드 구조형식의 동적거동에 대한 우수성을 입증하였다. 결과적으로, 파일지지 하이브리드 지지구조물은 우리나라 서남해안 지역과 같이 연약지반에 적용 할 수 있는 충분한 안정성을 가진 것으로 평가 되었고, 각 부재에 대한 최적화 연구를 통해 경제성 확보가 가능한 것으로 검토되었다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2008년도 춘계학술대회논문집
• /
• pp.393-399
• /
• 2008

A modeling method for the modal analysis of a pre-twisted multi-packet blade system undergoing rotational motion is presented in this paper. Blades are idealized as pre-twisted cantilever beams that are fixed to a rotating disc. The stiffness coupling effects between blades due to the flexibilities of the disc and the shroud are modeled with discrete springs. The coupling effect between chordwise and flapwise bending deflection is also considered. Hybrid deformation variables are employed to derive the equations of motion. To obtain more general information, the equations of motion are transformed into dimensionless forms in which dimensionless parameters are identified. The effects of the dimensionless parameters and the number of packets as well as blades on the modal characteristics of the rotating multi-packet pre-twisted blade system are investigated with some numerical examples.

• Earthquakes and Structures
• /
• 제3권6호
• /
• pp.853-867
• /
• 2012

In this paper, a new type of passive energy dissipating system similar to added damping and stiffness (ADAS) and triangular added damping and stiffness (TADAS) is proposed and implemented in the analytical model of a building with hybrid structural system in the structure's base which we call it; Telescopic column. The behavior and performance of a high rise R.C. structure equipped with this system is investigated and compared with conventional base isolation systems such as rubber isolator bearings and friction pendulum bearings. For this purpose a series of ground acceleration records of the San Fernando, Long Beach and Imperial Valley earthquakes are used as the disturbing ground motions in a series of numerical simulations. The nonlinear numerical modeling which includes both material and geometric nonlinearities were carried out by using SAP2000 program. Results show suitable behavior of structures equipped with telescopic columns in controlling the upper stories drifts and accelerations.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회A
• /
• pp.832-837
• /
• 2008

A modeling method for the modal analysis of a multi-packet blade system having tapered cross section undergoing rotational motion is presented in this paper. Blades are idealized as tapered cantilever beams that are fixed to a rotating disc. The stiffness coupling effects between blades due to the flexibilities of the disc and the shroud are modeled with discrete springs. Hybrid deformation variables are employed to derive the equations of motion. To obtain more general information, the equations of motion are transformed into dimensionless forms in which dimensionless parameters are identified. The effects of the dimensionless parameters including tapered ratio and the number of packets as well as blades on the modal characteristics of the system are investigated with some numerical examples.