• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2003년도 춘계학술대회논문집
• /
• pp.362-367
• /
• 2003

A new mechanical-electrical hybrid passive dam ping treatment is proposed to improve the performance of structural vibration control. The proposed hybrid passive damping system consists of a constrained layer damping treatment and a shunt circuit. In a passive mechanical constrained layer damping, a viscoelastic material damping layer is used to control the structural vibration modes in high frequency range. The passive electrical damping is designed for targeting the vibration amplitude in the low frequency range. The governing equations of motion are derived through the Hamilton's principle. The obtained mathematical model is validated experimentally. The presented theoretical and experimental techniques provide invaluable tools for controlling the multiple modes of a vibrating structure over a wide frequency band.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2004년도 Asia Display / IMID 04
• /
• pp.996-998
• /
• 2004

In this study, we tested parylene as the passivation layer for flexible organic light emitting diodes (FOLEDs).Parylene as passivtion layer has several advantages which are good optical transparent and low moisture penetration. For more an effective passivation of FOLEDs, we suggest hybrid passivation layer with parylene and silicon oxide. We compared electrical properties and stability of the device with and without passivation layer. The lifetime of FOLED with hybrid passivation layer was increased over three times than that of non-passivated of FOLED.

• 한국정보처리학회논문지
• /
• 제6권8호
• /
• pp.2031-2041
• /
• 1999

본 논문에서는 비정형, 대용량의 비디오데이터의 특징기반 검색과 주석기반 검색을 통합하여 다양한 사용자의 의미검색을 지원하고, 유사성 질의를 지원하는 통합비디오정보시스템(Hybrid Video Information System : HVIS)을 제안한다. HVIS는 메타데이터 모델링을 위해 한편의 비디오를 비디오 다큐먼트, 시퀸스, 장면, 객체로 나누고 물리적인 비디오스트림을 위한 원시데이터계층(raw_data layer)과 주석기반 검색, 특징기반 검색, 유사성 검색을 지원하기 위한 메타데이터계층(meta_data layer)의 두 개의 계층을 가진 통합 계층지향 메타데이터모델(Two layered Hybrid Object-oriented Metadata Model : THOMM)과 이 모델을 기반으로 주석기반 질의, 특징기반 질의, 유사질의가 가능한 비디오질의언어 (Video Query Language)와 질의를 처리하기 위한 비디오질의처리기 (Video Query Processor : VQP)와 질의처리알고리즘을 제안한다. 특히 유사한 장면, 객체를 찾는 유사질의시 사용자의 관심을 고려한 유사성 정도를 나타내는 식을 제시한다. 제안된 시스템은 Visual C++, ActiveX와 ORACLE를 이용하여 구현되었다.

• Restorative Dentistry and Endodontics
• /
• 제22권1호
• /
• pp.470-478
• /
• 1997

The purpose of this study was to investigate the effects of moistening mechods of dentin on the morphologic states of hybrid layers and on the interfacial bond strength between dentin and composite. Specimens were divided into 6 groups based on the surface moistening methods and materials used. After the dentin surface was conditioned with 10 % phoporic acid and irrigated: 1. The dentin surface was dried. Then bonding agent and composite were applied. 2. The dentin surface was blot-dryed. Then primer, bonding atent and composite were applied. 3. The dentin surface was dryed first. Within 20 seconds, the surface was rewetted, then primer, bonding agent and composite were applied. 4. The dentin surface was dryed. Then primer, bonding agnent and composite were applied. 5. The dentin surface was dryed first. Atter 24hrs, the surface was rewetted, and then primer, bonding agent and composite were applied. 6. The surface was conditioned with NaOCl for 5min. Then primer, bonding agent and composite were applied. To reveal the hybrid layer, scanning electron microscopy was used after the samples were ion beam etched. The shear bond strength of each group was tom pared by ANOVA. In groups 2, 3 and 4, the hybrid layer was clearly visible, but the width was more limited in group 4. In group 1 and 5, the hybrid layer was not found, and a gap was formed between dentin and composite. In group 6, the hybrid layer was not found, but the interface between the dentin and composite was intimate. The shear bond strength of each group was as follows: Group 1 : 4MPa, Group 2 : 14MPa, Group 3 : 12MPa, Group 4 : 14MPa, Group 5 : 5MPa, Group 6 : 9MPa.

• 정보보호학회논문지
• /
• 제9권1호
• /
• pp.57-70
• /
• 1999

기존의 혼합형 침입차단시스템은 네트워크 계층에서의 패킷 필터링 기능과 응용 계층에서의 응용게이트웨이 기능을 함께 수행하기 때문에, 모든 데이터가 응용 프로그램 계층에서 처리되는 게이트웨이 방식 침입차단시스템에 비해 성능이 뛰어나고 게이트웨이 방식 침입차단시스템처럼 다양한 접근제어가 가능하면서도 사용자에게 투명성을 제공할 수 있다. 하지만, 네트워크 계층과 응용 계층에 대응되는 보안정책을 각각 설정하여 접근을 제어하기 때문에 관리자의 침입차단시스템 관리를 용이하게 하기 위해서 일관성있는 사용자 인터페이스 개발이 요구된다. 본 논문에서는 혼합형 침입차단시스템을 위한 그래픽 사용자 인터페이스를 구현하여 접근제어 및 로그 분석, 실시간 네트워크 트래픽 감시, 날짜별 트래픽에 대한 통계처리와 같은 관리기능을 제공한다. 이 때, 접근제어를 위해서 새로운 규칙기술 언어를 함께 제안하고, 이를 이용하여 사용자가 요구하는 다양한 형식의 접근제어 규칙을 생성하도록 한다.

• Restorative Dentistry and Endodontics
• /
• 제21권1호
• /
• pp.227-241
• /
• 1996

The effect of collagen dissolution in acid conditioned dentin was morphologically examined by both scanning and transmission electron microscopy. 18 freshly extracted human molars and dentin bonding systems of All Bond 2, Scotchbond Multipurpose, Superbond D-Liner were used in this study. For SEM preparation, each 3 of ~ exposed dentin surfaces were acid conditioned by using various acids within the above three bonding systems respectively. After acid conditioning of the other 3 exposed dentin surfaces as above, they were treated with 1.7% NaOCl for 2 minutes. The remaining 3 dentin surfaces were acid conditioned and treated with 3.3 % NaOCl for 2 minutes. All of the specimens were then fixed in 4 % glutaraldehyde for 12 h at $4^{\circ}C$ and dehydrated in ethanols grades from 50 % to 100 %, then surface changes of the specimens were observed by using SEM. For TEM preparation, exposed dentin surfaces were acid conditioned with the same acid as SEM specimens and treated with 1.7%, 3.3 % NaOCl respectively, then applied with corresponding bonding agents. After the procedures were finished, composite resin were applied on the dentin surfaces and light cured. Small, rectangular sticks with end dimensions of approximately 1 by 1 mm were sectioned and further sample preparative techniques for transmission electron microscopy were performed in accordance with the procedures used for ultrastructural TEM observations of calcified tissues. The results were as follows : 1. In the 1.7 % NaOCl retreated specimens after acid conditioning, the porous dentin surface of intertubular dentin and wide opening of dentinal tubules were appeared. And there were fine irregularities on the intertubular dentin, indicating a clear difference as compared with the acid conditioned specimens. 2. In the 3.3% NaOCl retreated specimens after acid conditioning, the intertubular dentin was further eroded causing a more porous and wider opening of dentinal tubules. Moreover, sharp irregularities on the intertubular dentin were more evident than those of acid conditioned and 1.7% NaOCl retreated specimens. 3. In all of the acid conditioned specimens, the resin-dentin hybrid layer of approximately 3.5mm thickness was formed and the collapsed collagen layer was observed on the uppermost part of hybrid layer in the specimens applied with All Bond 2. The collgen fibrils of intertubular dentin in specimens applied with Scotchbond Multipurpose were running perpendicular to the interface, and electron dense black layer demarcated from the deep unaltered dentin was more evident in the specimen applied with Superbond D-Liner than any other specimens. 4. In the 1.7 % NaOCl retreated specimens after acid conditioning, the resin-dentin hybrid layer of approximately 2.5-3.0mm thickness was formed and the collapsed collagen layer and longitudinally running collagen fibrils as shown in the acid conditioned specimens were observed in the specimens applied with All Bond 2 and Superbond D-Liner. 5. In all of the 3.3% NaOCl retreated specimens after acid conditioning, the evidence of resin-dentin hybrid layer was not identified ; nevertheless, the longitudinally running collagen fibrils remained slightly in the specimens applied with All Bond 2.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2005년도 추계학술대회 논문집 Vol.18
• /
• pp.269-270
• /
• 2005

A hybrid passivation method using parylene and silicon dioxide combination layer for a flexible organic light emitting diode (FOLED) was applied on a polycarbonate substrate. A parylene coating by vapor polymerization method is a highly effective passivation process for the FOLED, and it applies all top surface and the edges of the FOLED device. In order to minimize the permeation of moisture and oxygen from the top surface of the device, an additional layer of silicon dioxide was deposited over the parylene coated layer. It was found that the water vapor transmittance rate (WVTR) of parylene (15 m-in-thickness) / SiO2 (0.3$\mu$m-in-thickness) combination layers deposited on polycarbonate film was decreased under the value of 10-3 g/m2day. The FOLED with the hybrid passivation showed remarkably longer lifetime characteristics in the ambient conditions than the non-passivated FOLED. The lifetime of the passivated FOLED was 400 hours and it was more than ten times over the lifetime of the convectional non-passivated FOLED.

• Transactions on Electrical and Electronic Materials
• /
• 제3권4호
• /
• pp.16-20
• /
• 2002

The high bias voltage associated with the thick layer (typically 500-1000 ㎛) of selenium required to have an acceptable x-ray absorption in radiography and fluoroscopy applications may have some practical inconvenience. A hybrid x-ray detector with zinc sulfide-amorphous selenium structure has been developed to improve the x-ray sensitivity of a a-Se based flat-panel digital imaging detector. Photoluminescence(PL) characteristic of a ZnS:Ag phosphor layer showed a light emission peak centered at about 450 nm, which matches the sensitivity spectrum of selenium. The dark current of the hybrid detector showed similar characteristics with that of a a-Se detector. The x-ray sensitivity of hybrid and a-Se x-ray detector was 345 pC/㎠/mR and 295 pC/㎠/mR at an applied voltage of 10 V/㎛, respectively. The purpose of this study was to evaluate the pertinence of a solution using a thin selenium layer, as a photosensitive converter, with a thick coating of silver doped zinc sulfide phosphor.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 춘계학술대회 논문집 센서 박막재료 반도체 세라믹
• /
• pp.75-78
• /
• 2003

In recent years, there has been keen interest in developing flat panel detectors for all modalities of radiology, including gerneral radiology, fluoroscopy, electronic portal imaging, and mammography. In this paper, we report the new hybrid x-ray detector consisted of ZnS(Ag) photoemission layer and a-Se photoconductor layer to resolve problem of conventional x-ray detector such as the direct detector and the indirect detector. To design the structure of ZnS(Ag)/a-Se detector, the penetrated energy spectrum and absorption fraction was estimated using MCNP 4C code. Also, we carried out the experiment to demonstrate the result of MCNP 4C code. Experimental results showed that the absorption fraction of $500{\mu}m$-ZnS(Ag) film was above 87%, 75% at 60 and 80 kVp. As a results, we can determined the thickness of suitable phosphor and the thickness of photoconductor.

• Transactions on Electrical and Electronic Materials
• /
• 제11권6호
• /
• pp.257-260
• /
• 2010

Zinc oxide (ZnO) bottom-contact thin-film transistors (TFTs) were prepared by the use of injector type atomic layer deposition. Two hybrid gate oxide systems of different polarity polymers with silicon oxide were examined with the aim of improving the properties of the transistors. The mobility and threshold voltage of a ZnO TFT with a poly(4-dimethylsilyl styrene) (Si-PS)/silicon oxide hybrid gate dielectric had values of 0.41 $cm^2/Vs$ and 24.4 V, and for polyimide/silicon oxide these values were 0.41 $cm^2/Vs$ and 24.4 V, respectively. The good hysteresis property was obtained with the dielectric of hydrophobicity. The solid output saturation behavior of ZnO TFTs was demonstrated with a $10^6$ on-off ratio.