• Reproductive and Developmental Biology
• /
• v.39 no.3
• /
• pp.77-81
• /
• 2015

This study was carried out to evaluate the effects of embryonic stage and toxicities of cryoprotectant on the rates of survival and development of the cryopreserved mouse early embryo and finally to establish the cryopreservation method of surplus embryos obtained during assisted reproductive technology. Toxicities of two cryoprotectants, dimethyl sulfoxide (DMSO) and ethylene glycol (EG) were investigated using a murine embryo model. Female F-1 mice were stimulated with gonadotropin, induced ovulation with hCG and mated. Two cell embryos were collected and cultured after exposure to either DMSO or EG. Embryo development was evaluated up to the blastocyst stage. The total cell count of blastocysts that were treated with DMSO ($68.1{\pm}24.1$) at the 2-cell stage was significantly lower than that were treated with EG ($81.2{\pm}27.0$) or the control ($99.0{\pm}18.3$) (p<0.001). On comparison of two cryoprotectant treated groups, the DMSO treated group showed a decreased cell count compared with the EG treated group (p<0.05). Both DMSO ($15.4{\pm}1.5$) and EG ($10.2{\pm}1.4$) treated groups showed higher apoptosis rates of cells in the blastocyst compared with the control ($6.1{\pm}0.9$, p<0.0001). In addition, the DMSO treated group showed more apoptotic cells than the EG treated group (p<0.001). The potential toxicity of cryoprotectants was uncovered by prolonged exposure of murine embryos to either DMSO or EG at room temperature. When comparing two cryoprotective agents, EG appeared to be less toxic than DMSO at least in a murine embryo model.

• Journal of Satellite, Information and Communications
• /
• v.8 no.1
• /
• pp.89-100
• /
• 2013

Communication Ocean Meteorological Satellite (COMS) for the hybrid mission of meteorological observation, ocean monitoring, and telecommunication service was launched onto Geostationary Earth Orbit on June 27, 2010 and it is currently under normal operation service after the In-Orbit Test (IOT) phase. The COMS is located on $128.2^{\circ}$ East of the geostationary orbit. In order to perform the three missions, the COMS has 3 separate payloads, the meteorological imager (MI), the Geostationary Ocean Color Imager (GOCI), and the Ka-band antenna. Each payload is dedicated to one of the three missions, respectively. The MI and GOCI perform the Earth observation mission of meteorological observation and ocean monitoring, respectively. During the IOT phase the functionalities and the performances of the COMS satellite and ground station have been checked through the Earth observation mission operation for the observation of the meteorological phenomenon over several areas of the Earth and the monitoring of marine environments around the Korean peninsula. The operation characteristics of meteorological mission and ocean mission are described and the mission planning for the COMS is discussed. The mission operation results during the COMS IOT are analyzed through statistical approach for the study of both the mission operation capability of COMS verified during the IOT and the satellite image reception capacity achieved during the IOT.

• Horticultural Science & Technology
• /
• v.32 no.6
• /
• pp.794-802
• /
• 2014

The aim of this study was to determine the effect of day-length extension treatment using LED lighting (blue, green, red, or 3 mixed) on vegetative growth and flowering of freesia 'Yvonne', in comparison to that using glow lamps and metal halide lamps. Lighting treatments were imposed from 5 PM to 8 PM for 150 days from after flower bud differentiation to flowering end. For the period from leaf emergence to floral bud formation, no light source affected plant height but the number of leaves was decreased by the metal halide lamp. The highest SPAD value in the flower bud developing period occurred in the metal halide lamp treatment. The time of flowering was advanced by blue or green LED treatment compared to the no lighting control. The green LED lighting advanced flowering by 6 and 8 days compared to no lighting and metal halide lamp treatment, respectively. The blooming period tended to be shortened by the red LED treatment. As for the flower characteristics of 'Yvonne', floret length and width, and the weight of cut flowers were highest in the metal halide lamp treatment. Red LED decreased corm width and weight of 'Yvonne' while glow lamp decreased height and weight. Starch contents in corm were not influenced by the lighting source. Our results indicate that the green LED lighting advanced the time of flowering and the metal halide lamp was good for cut-flower quality.

• Journal of Technology Innovation
• /
• v.22 no.3
• /
• pp.101-133
• /
• 2014

Climate change and low-carbon consumer movement is demanding proper response around the world while rising oil price increases consumers' needs for green car. As a preliminary study to establish an industrial platform for green car and bring out corporate strategies, this article aims to propose an academic research framework by using various methodologies including conceptual/mathematical modeling, system dynamics, and ABM from different angles. First, an analysis framework for the industrial platform was introduced to analyze green car cases, required elements were proposed, and econometrics was applied to build a basic model related to green platform (two-sided market). Also, to analyze from a dynamic perspective, a system dynamics model was applied to green car environment to build a system dynamics analysis model that is applicable to particular green car industry analysis. Lastly, an agent based model was used to study the way to activate the hybrid car market in Korea from individual consumers' perspective. Based on the result, vehicle policies that are either being enforced or planned to be enforced in the Korean HEV market can be analyzed.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.36 no.2
• /
• pp.105-112
• /
• 2018

To determine the position of receiver, the GPS (Global Positioning System) uses position information of satellites and pseudo ranges based on signals. These are reflected by surrounding structures and multipath errors occur. This paper proposes a method for multipath error reduction using digital images to enhance the accuracy. The goal of the study is to calculate the shielding environment of receiver using image processing and apply it to GPS positioning. The proposed method, firstly, performs a preprocessing to reduce the effect of noise on images. Next, it uses hough transform to detect the outline of building roofs and determines mask angles and permissible azimuth range. Then, it classifies the satellites according to the condition using the image processing results. Finally, base on point positioning, it computes the receiver position by applying a weight model that assigns different weights to the classified satellites. We confirmed that the RMSE (Root Mean Square Error) was reduced by 2.29m in the horizontal direction and by 15.62m in the vertical direction. This paper showed the potential for the hybrid of GPS positioning and image processing technology.

• Horticultural Science & Technology
• /
• v.28 no.4
• /
• pp.715-718
• /
• 2010

$Cymbidium$ 'Purple Princess' ('Show Girl' x 'Eiko') is a new cultivar having dark purple sepal and petal (RHS, RP59A) with purple lip (RHS, RP59A). A cross was made between pink colored $C.$'Show Girl' as maternal line and dark purple colored $C.$ 'Eiko' as paternal line in 1994. It was preliminarily selected as Line No. 94019267 in 1999 considering the characters of flower shape and color, leaf growing shape and growth habit in normal culture condition. Multiplication, cultivation, and characteristic trials were conducted from 2000 to 2003. The line was named as Wongyo F1-7 and phenotype was characterized in 2004 as a new 'Purple Princess'. 'Purple Princess' has about 13.2 flowers per flower stalk and flower size of 5.2 cm. General appearance of petals and sepals is slightly incurved shape. The plant size is intermediate having erect peduncle. Blooming starts from early December under optimal culture condition. Leaf attitude and twisting is erect and very weak respectively. Erect leaf will be suitable for growing and handling in the nursery as pot orchid flowers.

• Journal of Energy Engineering
• /
• v.24 no.4
• /
• pp.124-129
• /
• 2015

An experimental study was performed estimating COP(Coefficient of Performance) of air-conditioning cycle using inverter scroll compressor with and without $Al_2O_3$ nano particle. All experiments were done for various compressor speeds from 1000~4000 rpm and used the inverter controller called CANDY to change the compressor rpm. The air-conditioning cycle components in the apparatus were used as same with components of YF hybrid car. To estimate the COP, this study measured the temperature and pressure at inlets and outlets of compressor, condenser, and evaporator. And also measured the compressor input power using Powermeter. Through the experiments, the maximum error to estimate COP was shown about ${\pm}6.09%$ at 3500rpm. The COP of refrigeration cycle with $Al_2O_3$ nano-particle was similar with that of the base cycle without nano-particle between 1000~3000 rpm of the compressor speed. But, This study showed that the COP of the cycle with $Al_2O_3$ over 3000 rpm of the compressor speed was higher than that of the base cycle due to the higher heat transfer rate increased in the evaporator from the higher oil flow rate inside the cycle as well known. Those results can be used the basic and fundamental data to design the air-conditioning cycle using inverter scroll compressor with $Al_2O_3$ nano particle.

• Horticultural Science & Technology
• /
• v.17 no.6
• /
• pp.742-746
• /
• 1999

Contents of mineral element and cytokinin in the xylem sap of 'Keumdongee' and 'Tongilhwang' oriental melons were compared with those in oriental melons grafted onto 8 rootstocks. The effect of grafting on the fruit quality of oriental melon was also investigated. Flesh firmness varied with rootstocks. Soluble solids contents in the placenta tissue of grafted 'Tongilhwang' were higher than that in the 'Keumdongee'. Electric conductivity of the xylem sap in own-rooted plants was higher in 'Keumdongee' than in 'Tongilhwang', but it increased in 'Tongilhwang' once they were grafted. The sap volume per plant was greater in 'Keumdongee' than in 'Tongilhwang'. The mineral concentrations varied considerably depending on the rootstock used. Xylem sap of grafted oriental melons contained a higher amount of mineral ions, especially $NO_3{^-}$ and $PO_4{^-}$, than did the sap in own-rooted plants. The increase in the mineral levels in sap due to grafting was most apparent in 'Tongilhwang'. Xylem sap from both 'Keumdongee' and 'Tongilhwang' contained trans-zeatin (t-Z), trans-zeatin riboside (t-ZR), and dihydrozeatin riboside (DHZR). Small amounts of isopentenyl adenine (IPA) and isopentenyl adenine riboside (IPAR) were also detected. Trans-zeatin riboside was the most abundant, followed by t-Z. Cytokinin concentration in 'Keumdongee' was not significantly influenced by rootstock type used, although the highest concentration of cytokinins in 'Keumdongee' was obtained with 'Chamtozwa' rootstock. However, the cytokinin concentration in 'Tongilhwang' increased with grafting irrespective of rootstock type used.

• Corrosion Science and Technology
• /
• v.9 no.4
• /
• pp.147-152
• /
• 2010

Conventional paints for conversion coating applications in steel production derived mainly from water-based polymer dispersions containing several additives actually show good general performance, but suffer from poor scratch and abrasion resistance during use. The reason for this is because the relatively soft organic binder matrix dominates the mechanical surface properties. In order to maintain the high quality and decorative function of coated steel sheets, the mechanical performance of the surface needs to be improved significantly. In fact the wear resistance should be enhanced without affecting the optical appearance of the coatings by using appropriate nanoparticulate additives. In this direction, nanocomposite coating compositions (Nanomer$^{(R)}$) have been derived from water-based polymer dispersions with an increasing amount of surface-modified nanoparticles in aqueous dispersion in order to monitor the effect of degree of filling with rigid nanoparticles. The surface of nanoparticles has been modified for optimum compatibility with the polymer matrix in order to achieve homogeneous nanoparticle dispersion over the matrix. This approach has been extended in such a way that a more expanded hybrid network has been condensed on the nanoparticle surface by a hydrolytic condensation reaction in addition to the quasi-monolayer type small molecular surface modification. It was expected that this additional modification will lead to more intensive cross-linking in coating systems resulting in further improved scratch-resistance compared to simple addition of nanoparticles with quasi-monolayer surface modification. The resulting compositions have been coated on zinc-galvanized steel and cured. The wear resistance and the corrosion protection of the modified coating systems have been tested in dependence on the compositional change, the type of surface modification as well as the mixing conditions with different shear forces. It has been found out that for loading levels up to 50 wt.-% nanoparticles, the mechanical wear resistance remains almost unaffected compared to the unmodified resin. In addition, the corrosion resistance remained unaffected even after $180^{\circ}$ bending test showing that the flexibility of coating was not decreased by nanoparticle addition. Electron microscopy showed that the inorganic nanoparticles do not penetrate into the organic resin droplets during the mixing process but rather formed agglomerates outside the polymer droplet phase resulting in quite moderate cross linking while curing, because of viscosity. The proposed mechanisms of composite formation and cross linking could explain the poor effect regarding improvement of mechanical wear resistance and help to set up new synthesis strategies for improved nanocomposite morphologies, which should provide increased wear resistance.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.21 no.12
• /
• pp.1380-1393
• /
• 2010

This paper presents a design, fabrication and the test results of planar active electronically scanned array(AESA) radar prototype for airborne fighter applications using transmit/receive(T/R) module hybrid technology. LIG Nex1 developed a AESA radar prototype to obtain key technologies for airborne fighter's radar. The AESA radar prototype consists of a radiating array, T/R modules, a RF manifold, distributed power supplies, beam controllers, compact receivers with ADC(Analog-to-Digital Converter), a liquid-cooling unit, and an appropriate structure. The AESA antenna has a 590 mm-diameter, active-element area capable of containing 536 T/R modules. Each module is located to provide a triangle grid with $14.7\;mm{\times}19.5\;mm$ spacing among T/R modules. The array dissipates 1,554 watts, with a DC input of 2,310 watts when operated at the maximum transmit duty factor. The AESA radar prototype was tested on near-field chamber and the results become equal in expected beam pattern, providing the accurate and flexible control of antenna beam steering and beam shaping.