• Journal of electromagnetic engineering and science
• /
• 제12권4호
• /
• pp.280-286
• /
• 2012

The conventionally classified waves are reclassified in this paper, including the waves associated with metamaterial (MTM) transmission lines. Various types of guided waves in periodic structures are analyzed for 1D Composite Right/Left Handed (CRLH) transmission lines (TL). In addition, dispersion diagrams for 1D CRLH, RH, and LH TLs are presented in terms of radiation conditions. We have refined the design equations of the conventional 1D CRLH TL and proposed a condition to realize the desired phase shift and its slope per unit cell. This condition has been applied to the conventional Wilkinson power divider and realized into MTM added $90^{\circ}$ hybrid coupler. Based on the 10 dB return loss and the $90{\pm}10^{\circ}$ phase shift, the bandwidths of the MTM added $90^{\circ}$ hybrid coupler are 82.25% and 103.5% against the conventional 23% and 52.5%, respectively.

• 한국초전도ㆍ저온공학회논문지
• /
• 제9권1호
• /
• pp.57-60
• /
• 2007

Superconducting electric power devices need to stack HTS wires to increase the current carrying capacity. Uniform multi-stacked wires(UMS) which were made of the same HTS wires have been used. This paper shows the magnetization loss of hybrid multi-stacked(HMS) wire made of BSCCO wires and YBCO wires. Five HMS wires, YB(YBCO-BSCCO), YYBB. YBYB, YBBY and BYYB, were made and tested. Magnetization losses of each UMS wire were compared with corresponding HMS wire. Test results show that magnetization losses per unit length of HMS wire are between the corresponding UMS BSCCO wire and HMS YBCO wire below critical magnetic field. Above the critical magnetic field, magnetization losses of HMS wires are larger than that of corresponding both VMS wires.

• 전력전자학회논문지
• /
• 제9권4호
• /
• pp.319-325
• /
• 2004

무공해 자동차를 만들기 위해 중요한 요소로서는 주행거리와 알맞은 가격이다. 니켈-수소 배터리와 같은 향상된 배터리의 개발은 부분적으로 문제를 해결할 수 있으며, 또 하나의 효과적인 방법은 배터리 관리 시스템이나. 니켈-수소 배터리와 배터리 ECU는 주행거리, 가속도, 등판능력과 같은 무공해 자동차의 성능에 영향을 미치는 중요한 구성품이다. 예컨대 운행 중 쉽게 발생하는 단락, 과방전, 과충전은 배터리와 관계되는 가장 큰 문제점이기 때문에 전용의 HEV용 배터리 ECU의 개발은 필수적이다. 본 논문에서는 배터리 전류적산 및 전압에 기초한 HEV용 SOC 알고리즘을 제안하고 배터리 ECU를 설계 및 해석하였으며, 시험을 통해 타당성을 검증하였다.

• Journal of Advanced Marine Engineering and Technology
• /
• 제41권4호
• /
• pp.296-301
• /
• 2017

발전 플랜트, 석유 화학 플랜트, 단위 공장과 같은 다양한 플랜트에서 사용 후 스팀이나 잉여 스팀을 이용하여 온수나 급탕수를 생산하는 시스템의 수요가 증가하고 있다. 컴팩트 스팀 유닛(Compact Steam Unit, 이하 CSU)은 이러한 (폐)스팀 등을 이용하여 온수와 급탕수를 생산하는 시스템으로서 에너지 재활용 측면에서 매우 좋은 대안이 되고 있다. 본 연구에서는 CSU의 핵심 기자재 중 하나인 열교환기를 기존 판형 열교환기에서 성능이 개선된 하이브리드 판형 열교환기를 사용하였고, 개선된 온도 조절 밸브 및 제어 시스템 등으로 새로운 형태의 CSU(1,600 kW급)를 구성하여, CSU의 성능 시험을 수행하였으며 시험 결과를 CSU의 상용화를 위한 자료로 삼고자 하였다. 실험 결과, 1차측(고온측, 스팀)과 2차측(저온측, 냉수) 사이의 에너지 밸런스는 ${\pm}0.77%$ 이내였으며, CSU의 성능 평가 요소 중 가장 중요한 2차측 냉수 출구 온도 편차는 $(0{\sim}0.3)^{\circ}C$ 이었다.

• 한국전자파학회논문지
• /
• 제20권3호
• /
• pp.280-288
• /
• 2009

본 논문에서는 좁은 빔 특성을 가지고 35 dB 이상의 부엽 레벨(Side Lobe Level: SLL)을 가지는 Chebyshev 전류 분포의 선형 배열 안테나를 위한 고전력, 저손실의 스트립라인 10-출력 전력분배 기를 설계, 제작하였다. T-junction 전력분배기를 기본 구조로 하여 단위 셀을 설계하였고, 설계된 단위 셀을 결합하여 전체 전력분배기를 설계하였다. 설계 시 특성 개선을 위하여 다중 임피던스 변환기와 변형된 링 하이브리드 구조를 적용하였고 커넥터 구조의 변경을 통한 동축선로-스트립라인 천이 구조의 개선으로 반사 및 삽입 손실 특성을 개선하였다.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2011년도 추계학술대회
• /
• pp.16-17
• /
• 2011

본 논문에서는 120kW급 하이브리드 전기 차량용 IPMSM 제어기 개발 사례를 소개 한다. 높은 출력 밀도를 요구하는 하이브리드 전기차량의 특성을 고려하여 개발된 IPMSM(매입형 영구자석 동기전동기)를 대상으로 대전류, 고효율 시스템 구성을 위해 수냉식 MCU(Motor Control Unit)를 개발 하였다. 또한 효율적인 차량 전원 배선 및 냉각 유로 구성을 고려한 전원 분배 기능 및 방열판 설계기법이 적용 되었다. 개발된 MCU를 모의 해석 및 실험을 통해 검증 하였다.

• 대한전기학회논문지:전력기술부문A
• /
• 제55권2호
• /
• pp.62-66
• /
• 2006

We investigated the characteristics of the hybrid-type superconducting fault current limiter (SFCL) by the number of secondary windings. The SFCL consists of a transformer, which has a primary winding and several secondary windings with serially connected $YB_{a2}Cu_{3}O_{7}$ films. In order to increase the capacity. of the SFCL, the serial connection between each current limiting unit is necessary. Resistive-type SFCL has a difficulty in quenching simultaneously between the units due to slight differences of their critical current densities. The hybrid-type SFCL could achieve the simultaneous quenching through the electrical isolation and the mutual flux linkage among the units. We confirmed that the capacity of the SFCL could be increased effectively through the simultaneous quenching among the units. In addition, the power burden of the system could be reduced by adjusting the number of secondary windings. We will investigate the method to increase the capacity through serial and Parallel connections among current limiting units.

• 한국자동차공학회논문집
• /
• 제16권6호
• /
• pp.65-73
• /
• 2008

The purpose of this study is development of universal engine model for integrated Hybrid Electric Vehicle (HEV) simulator and a optimization of engine model. The engine model of this study is based on the MATLAB Simulink for universal and include engine fuel economy technologies for HEV. Various engine fuel economy technologies for HEV is estimated by commercial engine 1-D simulation program - WAVE. And, the 1-D simulation model of base version is compared with engine experiment result. The analyzed engine technologies with 1-D simulation are Dual-CVVT, Atkinson-Cycle and Cylinder-Deactivation System. There are improvement of fuel economy and power performance with Dual-CVVT model at part load and full load, pumping loss reduction with Cylinder-Deactivation System at idle and regeneration. Each estimated technologies are analyzed by 1-D simulation on all operation region for base data to converse simulink. The simulink based engine model maintains a signal with ECU for determination of engine operation point.

• 한국지열·수열에너지학회논문집
• /
• 제14권4호
• /
• pp.43-52
• /
• 2018

This paper presents the cooling performance analysis results of a ground-source heat pump (GSHP) system using hybrid ground heat exchanger (HGHE). In this paper, the HGHE refers to the ground heat exchanger (GHE) using both a vertical GHE and a surface water heat exchanger (SWHE). In order to evaluate the system performance, we installed monitoring sensors for measuring temperatures and power consumption, and then measured operation data with 4 different load burdened ratios of the hybrid GHE, Mode 1~Mode 4. The measurement results show that the system with HGHE mainly operates in Mode 1 and Mode 2 over the entire measurement period. The average cooling coefficient of performance (COP) for heat pump unit was 5.18, while the system was 2.79. In steady state, the heat pump COP was slightly decreased with an increase of entering source temperature. In addition, the parallel use of SWHE and VGHE was beneficial to the system performance; however, further research are needed to optimize the design data for various load ratios of the HGHE.

• 대한전기학회논문지:전력기술부문A
• /
• 제50권12호
• /
• pp.584-590
• /
• 2001

This paper presents a windows program package for solving security constrained OPF in interconnected Power systems, which is based on the combined application of evolutionary programming(EP) and sequential quadratic programming(SQP). The objective functions are the minimization of generation fuel costs and system power losses. The control variables are the active power of the generating units, the voltage magnitude of the generator, transformer tap settings and SYC setting. The state variables are the bus voltage magnitude, the reactive power of the generating unit, line flows and the tie line flow In OPF considering security, the outages are selected by contingency ranking method. The resulting optimal operating point has to be feasible after outages such as any single line outage(respect of voltage magnitude, reactive power generation and power flow limits). The OPF package proposed is applied to IEEE 14 buses and 10 machines 39 buses model system.