• 조명전기설비학회논문지
• /
• 제28권3호
• /
• pp.32-43
• /
• 2014

This paper presents the intra capacitance modeling according to the winding method, section bobbin and coil structure for hybrid choke coil capable of the EMI attenuation of broad bands from lower frequency bands to higher frequency bands and high frequency type common-mode choke coil capable of the EMI attenuation of high frequency band used in the EMI Block of LED-TV SMPS. In case of high frequency type CM choke coil, it can be explained the parasitic capacitance of A type and section bobbin type winding methods among them is much smaller than the other. The first resonant frequency of the proposed CM choke coil tends to increase as the parasitic capacitance becomes small and its impedance characteristics also show improved performance as the first resonant frequency increases. In case of hybrid choke coil using rectangular copper wire, it has investigated its parasitic capacitance compared to CM choke coil of conventional toroidal type becomes small. Also it has confirmed through the experiment results that CE margin and RE margin in frequency bands 0.5MHz to 5MHz and 30MHz to 200MHz are respectively 10dB and 15dB greater than that of conventional type in case of one stage EMI filter structure adopting hybrid choke coil compared to two stage EMI Filter structure using two of each CM choke coil used in the lower and higher frequency bands or two of CM choke coil used in only the lower frequency bands. In the future, the hybrid choke coil and CM choke coil of high frequency type show it can be practically used in not only LED/LCD-TV SMPS but also several applications such as LED Lighting, Laptop Adapter, Server Power Supply and so on.

• 전기전자학회논문지
• /
• 제22권1호
• /
• pp.185-188
• /
• 2018

본 논문은 LED-TV용 SMPS EMI 감쇄 필터에서 적용되고 있는 저주파와 고주파의 광범위한 대역에서 EMI 감쇄가 가능한 기생 커패시턴스 저감형 Hybrid 초크 코일의 코일 구조, 권선 방법 및 섹션 보빈에 따른 기생 커패시턴스 임피던스 모델링을 나타내고 있다. 특히 본 논문에서 제안한 기생 커패시턴스 저감형 Hybrid 초크 코일은 평각 동선 권선방법을 채택함으로써 기존의 자동 권선형 공통 모드 초크 코일에 비해 기생커패시턴스($C_p$)을 저감할 수 있다. 기생 커패시턴스($C_p$)가 작아짐에 따라 제안한 기생 커패시턴스 저감형 Hybrid 초크 코일의 1차 공진 주파수는 증가하며 1차 공진 주파수가 증가함에 따라 특히 고주파 대역에서 임피던스특성이 개선됨을 알 수 있다. 본 논문에서 제안한 기생 커패시턴스 저감형 Hybrid 초크 코일은 향후 LED-TV SMPS를 포함한 LED 조명, Note-PC Adapter 등과 같은 다양한 분야에 응용되리라 사료된다.

• 조명전기설비학회논문지
• /
• 제21권8호
• /
• pp.96-101
• /
• 2007

가스방전관(GDT)은 내부 정전용량이 작아서 통신용 서지보호기로 널리 사용되고 있는 소자이다. 하지만 가스방 전관의 동작개시를 위해서는 방전이 개시될 수 있는 충분한 전압과 시간이 필요하며, 이 동작개시전압은 피보호 회로가 서지에 민감한 장비일 경우 손상을 줄 수 있을 만큼 크므로 최근에는 조합 형태로 적용하는 경우가 대부분이다. 이렇게 초기 과전압이 상당 부분 존재하는 가스방전관에는 추가적으로 TVS나 필터 등을 통해 피크 전압을 제한해 주어야 한다. 본 논문에서는 공통모드 초크코일을 이용한 필터를 적용하여 공통모드와 차동모드의 조합회로를 구성하고, 주파수 대역이 다른 뇌임펄스 전압과 ring wave 전압을 인가하여 파형에 따른 조합회로의 특성을 확인하였다. 다단으로 보호되는 과정을 각각의 측정점에서 잔류전압을 측정하여 단계별로 적용한 SPD들이 어떻게 동작하는지를 실측데이터로 제시하였다. 각 단계의 잔류전압을 비교했을 때 공통모드에 비하여 차동모드에서 서지전압을 제한하는 성능이 보다 효과적이다.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2007년도 춘계학술대회 논문집
• /
• pp.250-253
• /
• 2007

Gas Discharge Tubes (GDTs) are widely used as surge protectors for commnuication applications due to their small internal capacitance. In these days, however, they are mostly used in combined configurations, because the activation voltage required to initiate the discharge process in the GDTs for sufficient amount of time can be large enough to damage surge-sensitive protected circuits. For GDTs with a considerably high initial over-voltage value, we should limit the peak voltage using a TVS or filter. As for ZnO varistors, even though their performance for voltage restriction is excellent, their applications in high-frequency commnuication circuits have been limited because of higher internal capacitance when compared to the GDTs. In order to develop a surge protector for commnuication applications by taking advantages of these two devices, we built a combination circuit that connects a GDT and a ZnO varistor along with a choke coil in common and differential modes. We describe how the applied SPDs operate in protection process steps with the actual data obtained from the residual voltage measurements at each step. The experiment results show that the surge voltage restriction with the choke coil is more effective in 100 [kHz] RingWave voltage than in lightning impulse voltage.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 제37회 하계학술대회 논문집 C
• /
• pp.1488-1489
• /
• 2006

Gas Discharge Tubes (GDTs) are widely used as surge protectors for communication applications due to their small internal capacitance. In these days, however, they are mostly used in combined configurations, because the activation voltage required to initiate the discharge process in the GDTs for sufficient amount of time can be large enough to damage surge-sensitive protected circuits. For GDTs with a considerably high initial over-voltage value, we should limit the peak voltage using a TVS or filter. As for ZnO varistors, even though their performance for voltage restriction is excellent their applications in high-frequency communication circuits have been limited because of higher internal capacitance when compared to the GDTs. In order to develop a surge protector for communication applications by taking advantages of these two devices, we built a combination circuit that connects a GDT and a ZnO varistor along with a choke coil in common and differential modes. We describe how the applied SPDs operate in protection process steps with the actual data obtained from the residual voltage measurements at each step. The experiment results show that the surge voltage restriction with the choke coil is more effective in differential mode than in common mode.