• 제목/요약/키워드: Hybrid Antenna

검색결과 147건 처리시간 0.022초

MIMO OFDM 시스템을 위한 하이브리드 심볼 옵셋 추정 알고리즘 (Hybrid Symbol Offset Estimation Algorithm for MIMO OFDM Systems)

  • 정혁구
    • 한국전자파학회논문지
    • /
    • 제19권4호
    • /
    • pp.461-469
    • /
    • 2008
  • 본 논문은 MIMO OFDM 시스템에 적용 가능한 하이브리드 심볼 옵셋 추정 알고리즘을 제안한다. MIMO OFDM 시스템은 다중 송수신 안테나 시스템이므로 종래의 단일 송수신 안테나 시스템에 적용되는 알고리즘과는 다르게 다중 수신 안테나 시스템에서 사용하는 결합 기법을 고려하여 사용할 수 있다. 따라서 본 논문에서는 MIMO OFDM 시스템과 같은 다중 수신 안테나 시스템에서 적용 가능한 심볼 옵셋 추정 알고리즘을 제안하고, MIMO 시스템 환경에서 모의 실험하였으며, ISI가 심한 채널의 경우에는 제안하는 동일 이득 결합 상관 관계 알고리즘이 종래의 이른 심볼 옵셋 추정 알고리즘보다 이상적인 샘플 위치를 찾는 성능이 1.8배 우수함을 제시하였다.

복합 위상천이기 구성을 갖는 위상배열안테나의 효율적인 배열구성에 관한 연구 (A Study on Efficient Configuration of Array for Phased Aray Antenna with Hybrid Phased Shifting Device)

  • 정진우;박성일;안형순
    • 한국전자통신학회논문지
    • /
    • 제13권6호
    • /
    • pp.1199-1206
    • /
    • 2018
  • 복합 위상천이기 구성은 배열안테나를 부 배열로 구성한 후, 부 배열 내부에는 일반적인 위상천이기를 사용하고, 부 배열 단위에는 실시간 지연 위상천이기를 사용하는 구성이다. 상기 구성은 빔 편이 현상을 효율적으로 개선할 수 있으나, 배열 구성이 적절하지 않으면 위상배열안테나 주 빔의 주파수 별 이득 편차가 발생하게 된다. 이와 같은 문제를 해소하기 위해 시스템 설계 주요 요구사항인 비 대역폭, 최대 빔 조향 각도 그리고 최대 이득 편차 제한 기준을 기반으로 효율적인 배열을 구성할 수 있는 간소화된 수식을 제시하였다.

GPS용 마이크로스트립 패치안테나의 광대역화 (Bandwidth Broadening for the GPS Microstrip Patch Antenna)

  • 손태호
    • 한국ITS학회 논문지
    • /
    • 제14권4호
    • /
    • pp.73-79
    • /
    • 2015
  • 윌킨슨 전력분배기 및 90도 하이브리드 회로를 각각 GPS용 마이크로스트립 패치안테나에 적용하여 넓혀진 대역특성을 비교한다. 패치는 정사각형 패치로 설계하고, 회로를 적용하기 위하여 패치안테나에 2포트 프로브 급전한다. 윌킨슨 전력분배기와 90도 하이브리드 회로를 설계하고 90도 위상차가 나는 출력 포트를 패치안테나에 공급한다. 설계된 패치와 2가지 회로를 FR4 기판에 구현하고 이들을 각각 결합한다. 구현된 안테나에 대한 정재파비 측정결과 2: 1 기준으로 윌킨슨 전력분배기 적용 때 36.5% 대역폭(1,200~1,775 MHz), 90도 하이브리드 적용 때 29.84% 대역폭(1,230~1,700 MHz)을 얻었다. 3dB 축비 대역폭은 17.14% 대역폭(1,360~1,630 MHz) 및 15.87% 대역폭(1,400~1,650 MHz)을 얻음으로써 광대역임이 입증되었고, 윌킨스 전력분배기 적용이 90도 하이브리드 적용보다 좀 더 넓은 대역폭이 나타났다. 무반사실에서 측정한 안테나의 최대이득은 GPS 중심주파수에서 각각 2.84 dBi 및 2.75 dBi를 얻었다.

mm파 컬러게이트 휘드 혼 안테나의 설계법 (Design Method for the Millimeter Wave Corrugated Feed Horn Antenna)

  • 손태호;박영태;한석태
    • 한국전자파학회:학술대회논문집
    • /
    • 한국전자파학회 2003년도 종합학술발표회 논문집 Vol.13 No.1
    • /
    • pp.487-491
    • /
    • 2003
  • Design procedure of corrugated horn antenna for mm-wave frequency range is presented, and hybrid condition in horn is calculated. Balanced hybrid mode should be converted in the horn from TE11 mode by the proper corrugation dimensions which size are available to be fabricated under the mm-wave short wavelength condition. In this paper, corrugate profiles which satisfy both hybrid condition and fabrication possibility are obtained.. By cylindrical mode theory, the electromagnetic fields both inside hem and corrugation are delivered. Propagation characteristics in hem is calculated by the mode impedance matching method with boundary conditions, and radiation fields are obtained by the Kirchhoff-Hyugen principle to the hem aperture fields. A mm-wave corrugated horn operates on 85 - 115GHz is designed and fabricated, and results of measurement are also shown.

  • PDF

A Broadband Microstrip Array Antenna for 3G Smart Antenna System Testbed

  • Rashid, Zainol Abidin Abdul;Islam, Mohammad Tariqul;Jiunn, Ng Kok
    • 정보통신설비학회논문지
    • /
    • 제5권1호
    • /
    • pp.43-59
    • /
    • 2006
  • A compact and broadband $4\times1$ array antenna was developed for 3G smart antenna system testbed. The $4\times1$ uniform linear away antenna was designed to operate at 1.885 to 2.2GHz with a total bandwidth of 315MHz. The array elements were based on the novel broadband L-probe fed inverted hybrid E-H (LIEH) shaped microstrip patch, which offers 22% size reduction to the conventional rectangular microstrip patch antenna. For steering the antenna beam, a commercial variable attenuator (KAT1D04SA002), a variable phase shifter (KPH350SC00) with four units each, and the corporate 4-ways Wilkinson power divider which was fabricated in-house were integrated to form the beamforming feed network. The developed antenna has an impedance bandwidth of 17.32% $(VSWR\leq1.5)$, 21.78% $(VSWR\leq2)$ with respect to center frequency 2.02GHz and with an achievable gain of 11.9dBi. The design antenna offer a broadband, compact and mobile solution for a 3G smart antenna testbed to fully characterized the IMT-2000 radio specifications and system performances.

  • PDF

A Broadband Microstrip Array Antenna for 3G Smart Antenna System Testbed

  • Rashid, Zainol Abidin Abdul;Islam, Mohammad Tariqul;Jiunn, Ng Kok
    • 정보통신설비학회논문지
    • /
    • 제7권1호
    • /
    • pp.41-58
    • /
    • 2007
  • A compact and broadband $4{\times}1$ array antenna was developed for 3G smart antenna system testbed. The $4{\times}1$ uniform linear array antenna was designed to operate at 1.885 to 2.2GHz with a total bandwidth of 315MHz. The array elements were based on the novel broadband L-probe fed inverted hybrid E-H (LIEH) shaped microstrip patch, which offers 22% size reduction to the conventional rectangular microstrip patch antenna. For steering the antenna beam, a commercial variable attenuator (KAT1D04SA002), a variable phase shifter (KPH350SC00) with four units each, and the corporate 4-ways Wilkinson power divider which was fabricated in-house were integrated to form the beamforming feed network. The developed antenna has an impedance bandwidth of 17.32% ($VSWR{\leq}1.5$), 21.78% ($VSWR{\leq}2$) with respect to center frequency 2.02GHz and with an achievable gain of 11.9dBi. The design antenna offer a broadband, compact and mobile solution for a 3G smart antenna testbed to fully characterized the IMT-2000 radio specifications and system performances.

  • PDF

S-대역 위성 탑재용 다중 빔 대형 안테나의 전기적 설계 연구 (A Study on the Electrical Design of a Multi-Beam Large Antenna for S-band Satellite Payload)

  • 윤소현;엄만석;염인복
    • 한국전자파학회논문지
    • /
    • 제21권11호
    • /
    • pp.1240-1247
    • /
    • 2010
  • 본 논문은 한반도 지역에 개인 휴대 단말을 사용한 보편적 통신 방송 서비스를 제공하기 위한 S-대역 위성 탑재용 다중 빔 대형 안테나의 전기적 설계 방법에 대해 연구한 것이다. 배열 소자로 급전되는 반사판 형태인 하이브리드 안테나로 다중 빔을 구현하고, 각 빔은 급전 배열의 일부를 사용하여 형성된다. 원하는 빔을 얻기 위해서는 각 배열 소자 신호의 크기와 위상을 최적화해야 하고, 이는 GO(Geometrical Optics) 및 PO(Physical Optics) 해석을 통해 이루어졌다. 또한, EIRP(Effective Isotropically Radiated Power) 요구 사항을 만족하도록 배열 소자의 개수를 최적하였다. 위성에 탑재 가능하도록 제한된 크기의 반사판을 사용하고, 배열 소자의 개수를 최소화하면서도 요구 사항을 만족시킬 수 있는 설계 방법과 그 성능 결과를 본 논문에서 확인할 수 있을 것이다.

Compact Circularly Polarized Antenna with a Capacitive Feed for GPS/GLONASS Applications

  • Jeong, Seong Jae;Hwang, Keum Cheol;Hwang, Do-In
    • ETRI Journal
    • /
    • 제34권5호
    • /
    • pp.767-770
    • /
    • 2012
  • This letter presents a novel compact circularly polarized patch antenna for Global Positioning System/Global Navigation Satellite System (GPS/GLONASS) applications. The proposed antenna is composed of a simple square radiating patch fed by a capacitive dual-feeder to increase the impedance bandwidth and a lumped element hybrid coupler to achieve the broadband characteristic of the axial ratio (AR). The realized antenna dimensions are $28mm{\times}28mm{\times}4mm$, which is the most compact size among the dual-band GPS/GLONASS antennas reported to date. The measured results demonstrate that the proposed antenna has a gain of 2.5 dBi to 4.2 dBi and an AR of 0.41 dB to 1.51 dB over the GPS/GLONASS L1 band (1.575 GHz to 1.61 GHz).

비접촉 접지구조에 의한 휴대폰 MIMO 안테나 격리도 향상 (Isolation Enhancement by the Non-connected Ground Structure for the Mobile Phone MIMO Antenna)

  • 조영상;손태호
    • 전기학회논문지
    • /
    • 제65권6호
    • /
    • pp.1032-1037
    • /
    • 2016
  • In this paper, the method of isolation enhancement for the mobile phone MIMO antenna of LTE class 40(2300~2400MHz) was studied. Design of MIMO antenna was based on the hybrid antenna that operates both a monopole and an IFA(Inverted F Antenna). A structure for the isolation enhancement which controls induced electric field on the ground plane is located between MIMO antenna, and was not connected with the ground but apart 0.3mm. A MIMO antenna that operates on class 3~40(1710~2400MHz) of LTE service bands and a structure for the isolation enhancement at the class 10 band were designed. VSWR measurement of implemented antenna on the FR4 board showed within 3:1 at entire design bands, and isolation between antennas at the class 40 band was less than -30dB. Isolation was enhanced more than 20dB by the studied structure. ECC(Envelope Correlation Coefficient) for MIMO performance was under 0.1, and antenna average gain and efficiency measured in the anechoic chamber were -4.28~-1.40dBi and 37.32~72.36% respectively.

사이드홀 시스템에서 안테나 배열 설계 및 하이브리드 수신기 (Design of Antenna Array and Hybrid Receiver in Sidehaul System)

  • 문상미;최운;추명훈;김대진;김철성;황인태
    • 전자공학회논문지
    • /
    • 제52권5호
    • /
    • pp.10-22
    • /
    • 2015
  • 이최근, 3GPP (3rd Generation Partnership Project) 에서는 폭발적으로 증가하고 있는 모바일 데이터 트래픽을 수용하기 위하여 사이드홀 (Sidehaul) 시스템을 개발하고 이에 대한 연구가 활발히 진행되고 있다. 사이드홀 시스템은 낮은 PAPR (Peak to Average Power Ratio)을 위해 SC-FDMA (Single Carrier-Frequency Division Multiple Access)를 기반으로 한다. 또한 제한된 공간에서 안테나 배열을 사용함으로써 MIMO (Multiple Input Multiple Output) 전송이 가능하게 한다. 본 논문에서는 사이드홀 시스템에서 ULA (Uniform Linear Array), UCA (Uniform Circular Array) 및 UPA (Uniform Planar Array)에 대한 안테나 배열을 설계하고 성능을 분석한다. 또한, 이웃셀로 부터 간섭의 영향을 줄이기 위하여 새로운 하이브리드 수신기 FSC(Full Suppression Cancellation)를 제안한다. 제안한 수신기는 IRC (Interference Rejection Combining)와 SIC (Successive Interference Cancellation)를 결합하여 간섭을 억제 및 제거 할 수 있다.