• Journal of the Earthquake Engineering Society of Korea
• /
• v.22 no.4
• /
• pp.253-259
• /
• 2018

Structure behaviors resulting from an earthquake are experimentally simulated mainly through a shaking table test. As for large-scale structures, however, size effects over a miniature may make it difficult to assess actual behaviors properly. To address this problem, research on the hybrid simulation is being conducted actively. This method is to implement numerical analysis on framework members that affect the general behavior of the structure dominantly through an actual scale experiment and on the rest parts by applying the substructuring technique. However, existing studies on hybrid simulation focus mainly on Slow experimental methods, which are disadvantageous in that it is unable to assess behaviors close to the actual level if material properties change depending on the speed or the influence of inertial force is significant. The present study aims to establish a Real-time hybrid simulation system capable of excitation based on the actual time history and to verify its performance and applicability. The hybrid simulation system built up in this study utilizes the ATS Compensator system, CR integrator, etc. in order to make the target displacement the same with the measured displacement on the basis of MATLAB/Simulink. The target structure was a 2-span bridge and an RC pier to support it was produced as an experimental model in order for the shaking table test and Slow and Real-time hybrid simulations. Behaviors that result from the earthquake of El Centro were examined, and the results were analyzed comparatively. In comparison with the results of the shaking table test, the Real-time hybrid simulation produced more similar maximum displacement and vibration behaviors than the Slow hybrid simulation. Hence, it is thought that the Real-time hybrid simulation proposed in this study can be utilized usefully in seismic capacity assessment of structural systems such as RC pier that are highly non-linear and time-dependent.

• Journal of Advanced Navigation Technology
• /
• v.11 no.3
• /
• pp.274-280
• /
• 2007

An ultra-wideband signal is characterized by a radiated spectrum with wide bandwidth around a relatively low center frequency. In this paper, the bit error rate (BER), packet error rate (PER), and data throughput performance for an ultra-wideband system with M-ary correlation receiver are analyze in additive white Gaussian noise (AWGN) and co-channel interference channel. To evaluate the performance of UWB system, a set of UWB communication waveform as pulse position modulated (PPM) signals consisting of more than one UWB pulse is used. The M-ary PPM signals are defined to be equally correlated in order to simplify the system performance analysis. The analysis for system performance shows that the wireless channel error significantly degrades throughput performance and can be effectively increased by hybrid ARQ scheme. Also, an attempt for comparing the data throughput of ultra-wideband system on different performance improvement schemes and parameters has been made. From the performance evaluation process, it is shown that the effects of wireless channel and hybrid ARQ scheme for ultra wideband M-ary PPM system can be evaluated by means of a suitable combination of the PER, throughput vs. signal-to-noise power ratio per bit.

• Journal of the Korean GEO-environmental Society
• /
• v.7 no.1
• /
• pp.67-80
• /
• 2006

This paper presented an application of the geotechnical hybrid-online simulation to the consolidation settlement problem of soft clay. Conventional numerical analyses have used idealized soil constitutive models obtained from the laboratory soil tests. On the other hand, in the hybrid-online simulation, soil response was directly introduced to numerical analyses from the soil element test, and, therefore, the complicated parameter estimation was not required in this method. Fundamentals of the hybrid-online simulation method and the development of the algorithm and corresponding hardware and software for the system were presented in this study. Furthermore, an incremental loading consolidation and the hydraulic conductivity test and a comparative study using the Terzagh's conventional consolidation theory were carried out for the system verification including the performance of the experimental device and source coding of software components, and the data reliability obtained from the system. In conclusion, we found that the hybrid-online consolidation simulation system could reproduce the consolidation behavior of the remolded Kaolinite specimen withoutany discrepancies.

• Advanced Composite Materials
• /
• v.17 no.3
• /
• pp.225-233
• /
• 2008

The analysis in this paper is focused on the pattern of mixing of filaments over a cross-section of hybrid yarns according to different combinations of reinforcement and matrix filament yarns through microscopic view. The volume content of filament in hybrid yarn cross-section was maintained at 50% for both reinforcement and matrix, and the hybrid yarns count at 600 tex throughout the experiments. It was observed from the experiments that diameters of reinforcement and matrix filaments have strong effects particularly on the pattern of mixing of filaments over a cross-section of hybrid yarns such that the hybrid yarns with more or less equal diameters of reinforcement and matrix filaments showed considerably even distributions over the hybrid yarn cross-section. This paper also investigates the possibility of hybridizing carbon/aramid, carbon/glass and aramid/glass matrices through the commingling process. In the experiment, several process parameters were selected and they include pressure, yarn oversupply-rate and different nozzle types. As a result of these experiments, it was concluded that the hybridized materials show better performance than individual reinforced filament yarns in terms of mechanical properties. For small tensile forces, the carbon/glass/matrix combination turned out to be good enough for general purpose applications.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.10 no.5
• /
• pp.266-272
• /
• 1985

The analysis of a cylindrical waveguide which is partially filled with dilectric materials has been performed for many years. Hut most of the analyses were an approximation by the analytic method. In this paper a FORTRAN program for numerical analysis is introduced to calculate the propagation constant for TE. TM and Hybrid modes. The results of the numerical calculation can be used to determine the resonant frequencies for TM. TE and Hybrid modes in the dielectric resonator.

• Proceedings of the KSR Conference
• /
• 2011.05a
• /
• pp.283-288
• /
• 2011

The high heat resistant material for brake disc is required for higher speed trains. Although Aluminum is very expensive, it which has high thermal conductivity and low density has been adapted to high performance light-weight brake disc. In this study, we carry out the thermal stress analysis for suggested shape of Al hybrid brake disc which was designed to meet the optimal point between a performance and economic side. And we compare the results from the analysis to results of conventional disc at the same braking speed. The result show that the temperature on braking surface of Al hybrid disc is lower than the temperature on conventional disc surface, whereas the maximum thermal stress is larger than stress on conventional disc.

• Journal of international Conference on Electrical Machines and Systems
• /
• v.1 no.4
• /
• pp.399-404
• /
• 2012

In this paper, a stator-separated axial flux-switching hybrid excitation synchronous machine (SSAFHESM) is presented, of which the structure and operational principle are introduced. The magnetic field distribution under different excited currents is analyzed, and some characteristics including flux-linkage, EMF and field control ability are studied by finite element analysis (FEA). Tests are carried out on a 12/10-pole prototype machine to validate the analysis results, and an excellent agreement is obtained.

• Journal of Power Electronics
• /
• v.16 no.4
• /
• pp.1541-1550
• /
• 2016

This paper presents a theoretical analysis and comparisons of active power filter (APF) and hybrid power filter (HPF) systems, given terminal constraints of harmonic compensations in nonlinear loads. Despite numerous publications for the two types of filters, the features and differences between them have not been clearly explained. This paper presents a detailed analysis of the operations of a HPF inverter along with those of passive power filters (PPFs). It also includes their effects on the power factor at the grid. In addition, a theoretical analysis and a systematic comparison between the APF and HPF systems are addressed based on system parameters such as the source voltage, output power, reactive component size, and power factor at the grid terminals. The converter kVA ratings and dc-link voltage requirements for both topologies are considered in the presented comparisons

• 한국신재생에너지학회:학술대회논문집
• /
• 2011.05a
• /
• pp.60.2-60.2
• /
• 2011

This study is to develop a 1kW-class small wind turbine blade which will be applicable to relatively low speed regions. For this blade, a high efficiency wind turbine blade is designed and a light and low cost composite structure blade is adopted considering fatigue life. In this study, shape design of 1kW-class small wind turbine blade for hybrid power generation system is carried out by BEMT(blade element momentum theory). X-FOIL open software was used to acquire lift and drag coefficients of the 2D airfoils used in power prediction procedure. Moreover, pressure and velocity distributions are investigated according to TSR by CFD analysis.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1998.04a
• /
• pp.419-425
• /
• 1998

This paper presents a method of enhancing the accuracy of hybrid modelling that predicts dynamic characteristics of the coupled structure by synthesizing after FE analysis and vibration experimental analysis of the relevant individual substructure. Since most FE models in engineering problems are very large, dynamic analysis with the full FE model is costly. Frequency response function(FRF) synthesis after reducing the FE model can reduce this computational cost but introduce mode truncation error similarly in the case of considering only low-frequency mode after eigensolutions of the complete structure. This paper introduces a FRF of FE model for hybrid FRF synthesis, which is reduced by using IIRS methods and compensated through eigensolutions of the reduced model, and shows the effectiveness of the presented method.