• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.23 no.6 s.165
• /
• pp.988-1000
• /
• 1999

An experimental study is presented for the effect of number of terms of a pewee series type stress function on stress analysis around a hole in tensile loaded plate. The hybrid method coupling photoelastsic data inputs and complex variable formulations involving conformal mappings and analytical continuity is used to calculate tangential stress on the boundary of the hole in uniaxially loaded, finite width tensile plate. In order to measure isochromatic data accurately, actual photoelastic fringe patterns are two times multiplied and sharpened by digital image processing. For qualitative comparison, actual fringes are compared with calculated ones. For quantitative comparison, percentage errors and standard deviations with respect to percentage errors are caculated for all measured points by changing the number of terms of stress function. The experimental results indicate that stress concentration factors analyzed by the hybrid method are accurate within three percent compared with ones obtained by theoretical and finite element analysis.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.16 no.1
• /
• pp.19-32
• /
• 2003

The structural system of a hybrid building is composed of upper shear wall which resist lateral force by bending deformation and lower frame which resist lateral force by shear deformation. A deep transfer girder is used to transfer gravity load safely from super structures to structural frame beneath. Because of the vertical discontinuity, a building with transfer girder must be analyzed by dynamic analysis. However, this structural system has many problems in performing dynamic analysis that cannot be solved by general analysis procedure. The slabs In transfer floor are considered as either a Plate element or a rigid diaphragm in finite element analysis without appropriate evaluation of their characteristics. Therefore, a reasonable analysis method is proposed in this study by evaluating the diaphragm effect of a hybrid structure system.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.23 no.2
• /
• pp.1-16
• /
• 1995

This study was carried out to suggest method which can be used to improve competitive power of theme parks. The characteristics of Hybrid Conjoint Analysis were described and its usefulness for identification of specific types of service theme parks have to provide was tested "Lotte World, " "Seoul land," and "farmland" were selected as study areas, and .7 attributes with 3 levels were utilized for analyses. Master design with 81 profiles was constructed to meet the requirement of ′Compromise Plan 1,′and data was collected by in-personal interviews on the study areas. Respondents were grouped by cluster analysis, and their characteristics were analyzed by discriminant analysis. Then, part-worth of each attribute . was estimated by stagewise estimation model Calibrated model of each group did not show part-worths of attributes clearly because both main effects and 2-way interaction effects were included in the models. Therefore, calibrated models′ coefficients were used to calculate utilities of all possible combinations of attributes levels. The results showed that managers of theme parks have several options for providing a new service: the combination of attribute levels with the highest utility is they however, they can choose the other combinations with next highest utlities is they can not afford it. Several suggestions were described to cope with the problems when Hybrid Conjoint Analysis is applied to landscape architectural study.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.11 no.4
• /
• pp.83-91
• /
• 2008

The development of the equal channel angular pressing(ECAP) process in metals has recently provided a feasible solution to produce ultra-fine or nano-grained bulk materials with tailored material properties. However, ECAP process is difficult to scale up commercially due to requirements of an excessive load. In this paper, a new Hybrid-ECAP process with torsional die is considered to obtain materials of ultra-fine grain structure under low forming load. An upper bound analysis and numerical simulation (DEFORM 3D, a commercial FEM code) are carried out on the torsional die. By the upper bound analysis, analytical expression for the compression force and rotation speed are obtained. By the FEM analysis, the distribution of strain, stress and deformation are obtained. These results show that the Hybrid-ECAP is a useful process because this process can obtain the homogeneous deformations with relatively low forming load. Additionally, due to decreased forming load, die life can be improve.

• Journal of Electrical Engineering and Technology
• /
• v.7 no.4
• /
• pp.564-569
• /
• 2012

This paper proposes a hybrid-excited linear synchronous motor (LSM) that has potential applications in a magnetically levitated vehicle. The levitation and thrust force characteristics of the LSM are investigated by means of three-dimensional (3-D) numerical electromagnetic FEM calculations and experimental verification. Compared to a conventional LSM with electromagnets, a hybrid-excited LSM can improve levitation force/weight ratios, and reduce the power consumption of the vehicle. Because the two-dimensional (2-D) FE analysis model describes only the center section of the physical device, it cannot express the complex behavior of leakage flux, which this study is able to predicts along with levitation and thrust force characteristics by 3-D FEM calculations. A static force tester for a hybrid-excited LSM has been manufactured and tested in order to verify these predictions. The experimental results confirm the validity of the 3-D FEM calculation scheme for the description of a hybrid-excited LSM.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.22 no.5
• /
• pp.871-878
• /
• 2013

Roll-to-roll (R2R) hot embossing systems have been developed and are widely used in various industrial domains. These systems press and heat flexible films between a press roll and a back-up roll, as said films pass through the two rolls. In previous studies, a heating roll was used for heating. However, in this study, a hybrid roll for R2R hot embossing is conceptualized and developed. This R2R system can be used for generating fine patterns on large and continuous films. The hybrid roll of our system can cool and heat the films simultaneously, thus affording greater flexibility in process design. Thermal and structural analyses were performed for developing the hybrid roll. In addition, a hybrid roll was designed based on analytical results. Experiments were conducted for measuring the performance of the developed hybrid roll.

• Journal of Advanced Marine Engineering and Technology
• /
• v.40 no.8
• /
• pp.721-725
• /
• 2016

This paper reviews the analysis of a given scenario according to the Hybrid Model, and why accident causation models are necessary in casualty investigations. The given scenario has been analyzed according to the Hybrid Model using its main five components, fallible decisions, line management, psychological precursors to unsafe acts, unsafe acts, and inadequate defenses. In addition, the differences between the SHEL and the Hybrid Model, and the importance of a safety barrier during an accident investigation, are shown in this paper. One unit of SHEL can be linked with another unit of SHEL. However, it cannot be used for the analysis of an accident. Therefore, we must use an accident causation model, which can be a Hybrid Model. This can explain the "How" and "Why" of accident, so it is a suitable model for analyzing them. During an accident investigation, the reason we focus on a safety barrier is to create another safety barrier or to change an existing safety barrier if that barrier fails. Hence, the paper shows how a sea accident can be investigated, and we propose a preventive way of avoiding the accident through combining the methods of different models for the future.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.31 no.3
• /
• pp.72-78
• /
• 2003

In this paper, the feasibility study and the parametric design of hybrid motor with HTPB/LOX were conducted for micro air launch system. Design results were compared with 1st stage of Pegasus XL for verification of hybrid motor. Results showed that hybrid motor replace solid booster if Isp of hybrid motor reaches 330sec. In addition, mission analysis was established for micro air launch system, and parametric design was conducted with design variables: number of port, initial oxidizer flux, and chamber pressure. And the region of Isp was identified by parametric study which satisfied design constraints and mission analysis.

• Journal of the Korean Chemical Society
• /
• v.55 no.2
• /
• pp.256-261
• /
• 2011

A new series of bis acetylated hybrid pyrazoles were synthesized and characterized by their melting point, elemental analysis, MS, FT-IR, one-dimensional $^1H$, and $^{13}C$ NMR spectroscopic data. All the synthesized compounds were tested for their in vitro antifungal activities against Candida sp. namely Candida albicans, Candida glabrata, Candida parapsilosis, Candida dubliniensis and Candida tropicalis. A close inspection of the in vitro anticandidal activity profile in differently electron donating ($CH_3$ and $OCH_3$) and electron withdrawing (-F, -Cl, and Br) functional group substituted phenyl rings of novel hybrid pyrazoles exerted strong anticandidal activity against all the tested Candida species.

• Earthquakes and Structures
• /
• v.16 no.1
• /
• pp.83-96
• /
• 2019

The seismic behavior of PRC coupling beam-hybrid coupled shear wall system is analyzed by using the finite element software ABAQUS. The stress distribution of steel plate, reinforcing bar in coupling beam, reinforcing bar in slab and concrete is investigated. Meanwhile, the plastic hinges developing law of this hybrid coupled shear wall system is also studied. Further, the effect of coupling ratio, section dimensions of coupling beam, aspect ratio of single shear wall, total height of structure and the role of slab on the seismic behavior of the new structural system. A fitting formula of plate characteristic values for PRC coupling beams based on different displacement requirements is proposed through the experimental date regression analysis of PRC coupling beams at home and abroad. The seismic behavior control method for PRC coupling beam-hybrid coupled shear wall system is proposed based on the continuous connection method and through controlling the coupling ratio, the roof displacement, story drift angle of hybrid coupled shear wall system, displacement ductility of coupling beam.