• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2009년도 제40회 하계학술대회
• /
• pp.1515_1516
• /
• 2009

A 440MHz wireless and passive surface acoustic wave (SAW) based micro-sensor was developed for simultaneous measurement of temperature and humidity. The developed sensor is composed of a SAW reflective delay lines structured by an IDT (Inter-Digital Transducer), four reflectors and humidity sensitive film (polyimide). Polyimide was dry-ecthed by RIE (Reactive Ion Etching) to obtain high roughness, which gives the large reaction area resulting in high sensitivity. In wireless testing using a network analyzer, sharp reflection peaks with high S/N ratio, small signal attenuation, and few spurious peaks were observed in the time domain. High sensitivity towards the temperature and humidiy were also observed in the large concentration range. The obtained sensitivity was $16.8^{\circ}/^{\circ}C$ for temperature sensor and $15.8^{\circ}$/%RH for humidity sensor.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 추계학술대회 논문집 학회본부 C
• /
• pp.1014-1016
• /
• 1998

A capacitance-type humidity sensor using porous silicon layer is developed. The unique property of this sensor is a structure which has electrodes on the surface of the wafer like a general IC device. To do this. the sensor was fabricated using process such as localized formation of porous silicon, oxidation of porous silicon layer, and etching of oxidized porous silicon layer. The measurement of humidity-sensing ability was done for two type of sensors using porous silicon layer formed in 25 and 35% HF solutions, respectively. As the result, the former sensors showed larger value and variation of capacitance for the relative humidity.

• 한국군사과학기술학회지
• /
• 제9권1호
• /
• pp.13-23
• /
• 2006

A propellant mainly consisting of nitric ester including nitrocellulose and nitroglycerine is characteristic of being decomposed naturally. And this phenomenon is known as being affected mostly by its storing temperature and humidity. In this research, the effect of storing temperature and humidity on self life has been studied by measuring the contained quantity of residual stabilizer of propellant KM30Al, which are parts of 155MM propelling charge K676 and K677; the method for the measurement is acceleration aging test, and decomposition reaction equation, Eyring Equation and Berthlot Equation were used for the calculation. As result of this study, it was found that the storing temperature influenced seven times as large as the storing humidity upon the self life of the propellant KM30Al, Furthermore, especially in the high temperature region, the storing temperature had a dominant effect on the self life.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2016년도 추계 학술논문 발표대회
• /
• pp.83-84
• /
• 2016

Surplus water inside a concrete other than moisture that is used for hydration of the cement affects the physical properties of the concrete (modulus of elasticity, compressive strength, drying shrinkage, and creep) by drying. Changes in temperature and humidity inside a concrete has correlation with the movement speed and reaction rate of deterioration factors such as carbon dioxide and chloride ions. In this study, comparison was performed between temperature and relative humidity inside the concrete and meteorological data for exposure environment through measurement at the site for two years. Surface temperature of the concrete (depth 1cm) was measured higher by 6℃ during the summers, while it was measured lower by 2℃ during the winters due to solar radiation, wind, and radiation cooling. As for relative humidity, change was large in the depth of 1cm, while more than 85% was maintained in the depth of 10cm.

• 한국정보통신학회논문지
• /
• 제3권3호
• /
• pp.671-679
• /
• 1999

본 논문에서는 습도를 세어하기 위해 습도센서를 사용하여 습도를 측정 제습 입력값과 비례 제어를 위해 범용 $\mu$-processorPIC16C54와 Thermoelectric module을 사용하여 구현하였다. Pottier Module 모델에 따라 크기와 특성이 다양하고 Module의 종류에 따라 그에 따른 적절한 열저항을 유지할 수 있도록 하는 방열판 선택 또한 매우 중요한 설계 요소이다. 열전소자를 사용하여 전자제습기를 구현함으로써 국부공간의 무소음, 무진동, 저에너지 소모에 의한 효과적인 제습을 할 수 있음을 확인할 수 있었다.

• 한국식품저장유통학회지
• /
• 제1권1호
• /
• pp.37-43
• /
• 1994

A microcomputer system consisting of 16-bit microcomputer, PCL-711S interface board, censors, and converters have been set up in order to automatically measure temperature, humidity and weight loss which are major variables of storage of apple. This system was operated by PC-LabDAS software. It has been possible to measure continuously the weight loss of Fuji apple stored in CA with the weight converter made by a miniature load cell and a strain amplifier. The temperature was checked by a k-type thermocouple and Pt 100 $\Omega$ RTD, and humidity by PQ653JAl humidity sensor. It has been possible to set up a linear equation which showers high correlationship between the estimate of temperature, weight humidity and the output of the converter in that r2 is more than 0.99. Transpiration rate, a significant factor of quality deterioration for CA storage of apple, can be estimated with these values.

• 한국화재소방학회논문지
• /
• 제15권3호
• /
• pp.44-48
• /
• 2001

본 연구에서는, 접촉연소식 가스 탐지 소자를 대상으로 감도특성 및 전기적 특성을 분석하였으며, 24시간 동안 공기중에 노출시킨 후 온도($20^{\circ}c$, $40^{\circ}c$)와 상대습도(65%, 85%)에서 작동시켜 분석하였다. 또한 동일한 주거환경에서 210일 동안 50 cm/sec 유속을 유지하며 가스탐지소자의 동작을 실험하였다. 가스 탐지센서에 공급 전원은 기본회로에 직류 전압별(2.1V, 2.2V, 2.3V)로 인가하였다. 따라서, 상대습도와 온도에 의한 이소부탄과 메탄 특성그래프를 각각 분석한 결과 전반적으로 선형적인 증가를 보임을 확인할 수 있다.

• Journal of Biosystems Engineering
• /
• 제26권4호
• /
• pp.379-384
• /
• 2001

To enhance the smooth graft-taking of grafted seedlings, the excessive evapotranspiration from grafted seedlings just after grafting should be avoided. A measurement system of the evapotranspiration rate of grafted seedling under artificial lighting was set up to investigate the effect of physical environment on the evapotranspiration and graft-taking characteristics of grafted seedlings quantitatively. The evapotranspiration rate of grafted seedlings affected by relative humidity and light intensity were analyzed using the measurement system. The hypocotyl of watermelons (Citrullus vulgaris cv. Sweetdew, Hungnong Seed Co.) was slantly cut and then inserted into a hole on the stem of rootstock (Lagenaria siceraria cv. FR-King, Hungnong Seed Co.). Grafted seedlings were healed and joined for 5 days under cool-white fluorescent lamps (FL20SEX-d/18, Keumho Electric Co.) with photoperiod of 12h$.$d$\^$-1/ except dark period for one day after grafting in a closed graft-taking enhancement system developed by Kim(2000). The evapotranspiration rate and graft-taking of grafted seedling at air temperature of 23$\^{C}$ and air current speed of 0.1m$.$s$\^$-1/ was highly affected by relative humidity. But light intensity showed higher effect on the stem length of scion than relative humidity. In conclusion, it was suggested that relative humidity should be controlled at higher than 90% with photosynthetic photon flux of 50$\mu$mol$.$m$^2$$.$s$\^$-1/ to increase the survival of grafted seedlings and to produce healthy seedlings.

• 한국농업기계학회:학술대회논문집
• /
• 한국농업기계학회 2017년도 춘계공동학술대회
• /
• pp.154-154
• /
• 2017

Root is an important organ of plant that typically lies below the surface of the soil. Root surface determines the ability of plants to absorb nutrient and water from the surrounding soil. This study describes an application of image processing and computer vision which was implemented for rapid measurement of seed germination such as root length, surface area, average diameter, branching points of roots. A CCD camera was used to obtain RGB image of seed germination which have been planted by wet paper in a humidity chamber. Temperature was controlled at approximately 250C and 90% relative humidity. Pre-processing techniques such as color space, binarized image by customized threshold, removal noise, dilation, skeleton method were applied to the obtained images for root segmentation. The various morphological parameters of roots were estimated from a root skeleton image with the accuracy of 95% and the speed of within 10 seconds. These results demonstrated the high potential of computer vision technique for the measurement of seed germination.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2015년도 추계학술대회
• /
• pp.147-148
• /
• 2015

농업은 고 수율, 고 품질, 안전적인 지속적으로 발전하기 위해 과학 기술을 이용하면서 농업 생산, 가공, 유통이 정보화 지능화 시키고 표준화 관리 시스템을 구축해야한다. 이를 이루기 위해 농사 모니터링 시스템에 대한 연구를 많아지고 있는 반면에 일반 농가들은 비닐하우스로 농작물 재배 시에 여전히 전통적인 수공 측정 방식으로 습도를 측정하고 있다. 이런 문제를 해결하기 위해 본 논문에서는 센서, 디스플레이 장치 등을 결합하며 자동 습도 조절 환경을 구축한다.