• Journal of Ecology and Environment
• /
• 제39권1호
• /
• pp.119-125
• /
• 2016

Mongolia has one of the strongest climate warming signals on Earth, and over 40% of the human population depends directly or indirectly on pastoral livestock production for their livelihoods. Thus, climate-driven changes in rangeland production will likely have a major effect on pastoral livelihoods . The loss of species dependent mostly on rainfall has resulted in adverse changes in the botanical composition of the steppes . Summer season in 2015 was completely dry until middle of July and, had not enough vegetation cover as last 15 years. The purpose of this study is to check plant community dynamics in Mongolia in relation to climate change in 2014 and 2015. The study sites were selected in mountain-steppe habitat in central Mongolia. In the 2014, there have been registered 81 plant species of 56 genera of 25 families on the investigated sites and, occurred 57 plant species of 44 genera of 21 families in the 2015. It is concluded that the abundance and richness of plants are directly connected to heavily affect by the climatic factor, i.e. amount of precipitation during growing season. As a same like result of climate change, in Mongolian land is going become desertification, and each spring, soil particles from Mongolia are swept up by a cold air mass into the atmosphere and blasts into south east China, Korea and Japan. The Koreans call this phenomenon the "Fifth season" or "Yellow sand", and the Chinese call it "Yellow dragon".

• Journal of the Korean Society of Costume
• /
• 제38권
• /
• pp.51-72
• /
• 1998

Futurists objected the existent style, that is the conventional fashion, and took part in these disciplines of fashion to make clothes the instruments being able to represent the individuality. Giacomo Balla and fortunato Depero, pain-ters who in 1915 were to work with Diaghilev's company, were the first to see clothing as a dynamic interfaced between th body and the atmosphere, between physical gestures and the urban context, which could be translated into encounters between forms and colours, volumes and architecture. For them, clothing began to exist as an object and an event, something to be removed from a mainly static conception and made mobile, active. The interaction between movement and clothing was based on the relativity of perception : the appearance and disappearance of the body produced points without dimension or duration which served, as Balla wrote in the Futurist Mnaifesto of Men's Clothing to“renew incessantly the enjoyment and impetuous movement of the body”. The historical achievement in the effort for the reformation of Futurist, Art to Wear. First, for Futurist, clothing is removed from a static conception and focused on dynamics. Second, Balla used asymmetry in men's clothing. Moreover he supposed dynamic men's clothes by using optical intersection. Third, the after image of Chronophotograph represented rapidity. This rhythmic expression is the fore-runner in Optical and Kinetic Art of Visual Art. Fourth, Futurist emphasized flexibility in fashion. They aimed to create‘Clothing Machines’whose parts would interact to aceelerate the real and virtual, inner and outer movement of the human being. Fifth, the variety and short life of cutting skills and colors are focused and‘Fast Substance’in fashion is admitted by Futurists. Futurist concern with clothing was not lim-ited its appearance in terms of cut and colour. What important was also the way it appeared and disappeared according to fashion. It was a“fast substance”, able to reflect rapid, sudden changes of social and aesthetic taste. To reach to the aim of internationalization, Gesamtkunstwerk in our Art to Wear, it is extremely meaningful to examine art fashion which is created under the conception of Gesamtkunstwerk production of avang garde artist in the early 20th century and look at formative conscious of truth, goodess and beauty synthetically which they faced on their works of art.

• Fashion & Textile Research Journal
• /
• 제16권4호
• /
• pp.543-553
• /
• 2014

This study analyzes the visual image and the symbolic image of the 'New Woman' main female characters' costumes in three films: , , and , set in the Korean Empire Period and filmed in the last 10 years. The findings are as follows. First, on the visual image by formative characteristics, Gibson girl style was reflected in Western costume design. Korean costume design is based on a traditional style (or modified in some parts). Second, the three films have the same historical background on the visual image by the fidelity of historical research; however, the fidelity of historical research differs and varies with the personality of characters or situations in the films. Third, all three films share the symbolic image by characteristics of characters and 'New Woman' aspect with the same historical background and 'New Woman' female character in common; however, the personality and 'New Woman' aspect of the characters were somewhat different. There was also a distinct difference in the symbolic image of Western and Korean costumes. Western and Korean costumes signify externality versus internality and denial versus the affirmation of national identity in ; dailiness versus ceremonialness and dynamics versus statics in ; and independence versus conformity and variability versus continuity in .

• Advances in aircraft and spacecraft science
• /
• 제2권2호
• /
• pp.169-182
• /
• 2015

Aeronautics engine cooling is one of the biggest problems that engineers have tried to solve since the beginning of human flight. Systems like radiators should solve this purpose and they have been studied extensively and various solutions have been found to aid the heat dissipation in the engine zone. Special interest has been given to air coolers in order to guide the air flow on engine and lower the high temperatures achieved by the engine in flow conditions. The aircraft companies need faster and faster tools to design their solutions so the development of tools that allow to quickly assess the effectiveness of an cooling system is appreciated. This paper tries to develop a methodology capable of providing such support to companies by means of some application examples. In this work the development of a new methodology for the analysis and the design of oil cooling systems for aerospace applications is presented. The aim is to speed up the simulation of the oil cooling devices in different operative conditions in order to establish the effectiveness and the critical aspects of these devices. Steady turbulent flow simulations are carried out considering the air as ideal-gas with a constant-averaged specific heat. The heat exchanger is simulated using porous media models. The numerical model is first tested on Piaggio P180 considering the pressure losses and temperature increases within the heat exchanger in the several operative data available for this device. In particular, thermal power transferred to cooling air is assumed equal to that nominal of real heat exchanger and the pressure losses are reproduced setting the viscous and internal resistance coefficients of the porous media numerical model. To account for turbulence, the k-${\omega}$ SST model is considered with Low- Re correction enabled. Some applications are then shown for this methodology while final results are shown in terms of pressure, temperature contours and streamlines.

• Korean Journal of Ecology and Environment
• /
• 제38권4호통권114호
• /
• pp.439-444
• /
• 2005

The environmental quality of the middle-reach of the Yahagi River has deteriorated in recent years. The nutrient dynamics within the reach were investigated to explain the changes. Seasonal pattern of $NO_3\;^--N$ concentration tended to stay low from April or May through July or August and then increased till winter or early spring, although there were peaks during high flow periods in mid-September, 2000 and late-August, 2001. No clear seasonal changes were observed in $PO_4\;^{3-}-P$ concentration. In the bimonthly records from 1980-2002, the DIN concentrations on January and March were higher than other months whereas the average daily flows on January and March were lower than they were in other months. The mean DIN concentration showed a high negative correlation with the median of average daily flow. In the past 50 years, the average concentration of DIN (excluding nitrite) was 0.21 mg $L^{-1}$ in 1952-1953. The concentration was about twice this high around 1980, and it is about three times this high at present. On the other hand, the average concentration of $PO_4\;^{3-}-P$ was below the limit of detection in 1952-53. However, it increased to almost 0.03 mg $L^{-1}$ around 1980, then decreased to approximately 0.016mg $L^{-1}$ at present. Our results suggest that the increasing DIN concentration is one of the causes of environmental change in the Yahagi River. We conclude that controlling the DIN concentration is essential for improving the river environment.

• BMB Reports
• /
• 제49권5호
• /
• pp.245-246
• /
• 2016

The level and activity of critical regulatory proteins in cells are tightly controlled by several tiers of post-translational modifications. HIF-1α is maintained at low levels under normoxia conditions by the collaboration between PHD proteins and the VHL-containing E3 ubiquitin ligase complex. We recently identified a new physiologically relevant mechanism that regulates HIF-1α stability in the nucleus in response to cellular oxygen levels. This mechanism is based on the collaboration between the SET7/9 methyltransferase and the LSD1 demethylase. SET7/9 adds a methyl group to HIF-1α, which triggers degradation of the protein by the ubiquitin-proteasome system, whereas LSD1 removes the methyl group, leading to stabilization of HIF-1α under hypoxia conditions. In cells from knock-in mice with a mutation preventing HIF-1α methylation (Hif1α^KA/KA), HIF-1α levels were increased in both normoxic and hypoxic conditions. Hif1α^KA/KA knock-in mice displayed increased hematological parameters, such as red blood cell count and hemoglobin concentration. They also displayed pathological phenotypes; retinal and tumor-associated angiogenesis as well as tumor growth were increased in Hif1α^KA/KA knock-in mice. Certain human cancer cells exhibit mutations that cause defects in HIF-1α methylation. In summary, this newly identified methylation-based regulation of HIF-1α stability constitutes another layer of regulation that is independent of previously identified mechanisms.

• Journal of Technology Innovation
• /
• 제8권2호
• /
• pp.19-65
• /
• 2000

This study analyzes the development of technological infrastructure(TI) and technological infrastructure policy(TIP) to enhance the technological capabilities of small and mid-sized manufacturing enterprises(SMEs) in the U.S. and Korea in terms of the technological system(TS) concept, which is composed of technological infrastructure, industrial organization, and institutional infrastructure. In order to analyze the internal dynamics of the system, such as incentive mechanisms, the interaction among economic actors, and the policy implementation process, we compare the MEP(Manufacturing Extension Partnership) system of the U.S. and the Joong-Jin-Gong system of Korea. Among many similarities, contrasts, and insights from each country's effort to construct TI and TS, the main findings are as follows. (1) Both the MEP system and the Joong-Jin-Cong system are TI-led or government-led type TS. However, the nation-wide picture is different: in the U.S., most TSs including the MEP system., are classified as TI-led type; in Korea, many TI-assisted or private sector-led TSs have been developed since the early 1960s. (2) the MEP system, as a representative case of the U.S., is less stable than the Joong-Jin-Gong system of Korea in terms of financing and political cycle. (3) The MEP system is a more complex and cooperative network than the Joong-Jin-Gong system. NIST, as a critical mass, generates the system, bridges various institutions, and influences the development of the system by providing funding. (4) Regarding TI components, TSs in both countries focus on utilizing off-the-shelf technologies rather than advanced technologies. However, the direction of movement is different: in the U.S., TSs have come to emphasize existing technologies to counterbalance an innovation system that has been highly focused toward new technologies; in Korea, TSs have been moving from focusing on a higher diffusion rate of imported process technologies to stressing new technology development. (5) Personnel and staffing, embodying technological capability, is an important concern in both countries. But the human capital infrastructure of the U.S. system is more efficient and industry-oriented than that of the Korean system due to a more flexible labor market. (6) While the U.S. has a strong tradition of state and local autonomy in constructing TI and TS to fit SMEs's specific need, Korea has a centralized and bureaucratically-led policy implementation process.

• Parasites, Hosts and Diseases
• /
• 제53권3호
• /
• pp.355-359
• /
• 2015

Hydatid disease imposing serious threat on human health and great loss in live-stock pastoralism remains a major public health problem in western China. To assess and monitor the effect of control program on transmission dynamics, we used the prevalence of cystic echinococcosis in slaughtered sheep at slaughterhouse as an indicator during the period of 2007 to 2013 in Emin County, Xinjiang Uygur Autonomous Region, China. The results showed a significant decline trend of prevalence in all age groups during the 7 years when the control program was implemented; particularly, the rate was reduced by 72% after first 3 years. Among the sheep slaughtered, the age distribution evidenced that the prevalence increased significantly as the sheep grew older. The baseline data indicated that the rate was 4.5% at the age <1, 6.7% at age 2~, and reached to the highest 17.9% at age ${\geq}4$ years. Earlier response to the intervention pressure was seen in the sheep at the younger age. Significant decline started from 2008 at the age <1, from 2009 at age of 1~, 2010 at 2~ to 3~, and the latest, in 2012 at age ${\geq}4$. This study demonstrated that the prevalence of cystic echinococcosis in slaughtered sheep may be used as an indicator to assess and monitor the transmission status during and after control program providing information for betterment of performance to sustain control strength.

• Journal of the Korean Society for Nondestructive Testing
• /
• 제36권6호
• /
• pp.451-459
• /
• 2016

Crack detection on panels during manufacturing process is an important step for ensuring the product quality. The accuracy and efficiency of traditional crack detection methods, which are performed by eye inspection, are dependent on human inspectors. Therefore, implementation of an on-line and precise crack detection is required during the panel pressing process. In this paper, a regular CCTV camera system is utilized to obtain images of panel products and an image process based crack detection technique is developed. This technique uses a comparison between the base image and a test image using an amplitude mapping of the local image. Experiments are performed in the laboratory and in the actual manufacturing lines to evaluate the performance of the developed technique. Experimental results indicate that the proposed technique could be used to effectively detect a crack on panels with high speed.

• Transactions of the Korean Society of Automotive Engineers
• /
• 제19권6호
• /
• pp.30-36
• /
• 2011

The current test methods are insufficient to evaluate and ensure the safety and reliability of vehicle system for all possible dynamic situation including the worst case such as rollover, spin-out and so on. Although the known NHTSA Sine with dwell steering maneuvers are applied for the vehicle performance assessment, they aren't enough to estimate other possible worst case scenarios. Therefore, it is crucial for us to verify the various worst cases including the existing severe steering maneuvers. This paper includes useful worst case based upon the existing worst case scenarios mentioned above and worst case evaluation for vehicle dynamic controller in simulation basis and UCC HILS. The only human steering angle is selected as a design parameter here and optimized to maximize the index function to be expressed in terms of both yaw rate and side slip angle. The obtained scenarios were enough to generate the worst case to meet NHTSA worst case definition. It has been concluded that the new procedure in this paper is adequate to create other feasible worst case scenarios for a vehicle dynamic control system.