• 제목/요약/키워드: Human dimension

검색결과 488건 처리시간 0.03초

압전 후막의 전단 변형을 이용한 나선형 MEMS 발전기 (A Novel Spiral Type MEMS Power Generator with Shear Mode Piezoelectric Thick Film)

  • 송현철;김상종;문희규;강종윤;윤석진
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 2008년도 추계학술대회 논문집 Vol.21
    • /
    • pp.219-219
    • /
    • 2008
  • Energy harvesting from the environment has been of great interest as a standalone power source of wireless sensor nodes for ubiquitous sensor networks (USN). There are several power generating methods such as thermal gradients, solar cell, energy produced by human action, mechanical vibration energy, and so on. Most of all, mechanical vibration is easily accessible and has no limitation of weather and environment of outdoor or indoor. In particular, the piezoelectric energy harvesting from ambient vibration sources has attracted attention because it has a relative high power density comparing with other energy scavenging methods. Through recent advances in low power consumption RF transmitters and sensors, it is possible to adopt a micro-power energy harvesting system realized by MEMS technology for the system-on-chip. However, the MEMS energy harvesting system hassome drawbacks such as a high natural frequency over 300 Hz and a small power generation due to a small dimension. To overcome these limitations, we devised a novel power generator with a spiral spring structure. In this case, the energy harvester has a lower natural frequency under 200 Hz than a normal cantilever structure. Moreover, it has higher an energy conversion efficient because shear mode ($d_{15}$) is much larger than 33 mode ($d_{33}$) and the energy conversion efficiency is proportional to the piezoelectric constant (d). We expect the spiral type MEMS power generator would be a good candidate as a standalone power generator for USN.

  • PDF

삼차원 전산화단층촬영사진과 측모두부 방사선규격사진의 계측자에 따른 계측오차에 대한 비교분석 (Comparison of the observer reliability of cranial anatomic landmarks based on cephalometric radiograph and three-dimensional computed tomography scans)

  • 김재영;이동근;이상한
    • Journal of the Korean Association of Oral and Maxillofacial Surgeons
    • /
    • 제36권4호
    • /
    • pp.262-269
    • /
    • 2010
  • Introduction: Accurate diagnosis and treatment planning are very important for orthognathic surgery. A small error in diagnosis can cause postoperative functional and esthetic problems. Pre-existing 2-dimensional (D) chephalogram analysis has a high likelihood of error due to its intrinsic and extrinsic problems. A cephalogram can also be inaccurate due to the limited anatomic points, superimposition of the image, and the considerable time and effort required. Recently, an improvement in technology and popularization of computed tomography (CT) provides patients with 3-D computer based cephalometric analysis, which complements traditional analysis in many ways. However, the results are affected by the experience and the subject of the investigator. Materials and Methods: The effects of the sources human error in 2-D cephalogram analysis and 3-D computerized tomography cephalometric analysis were compared using Simplant CMF program. From 2008 Jan to 2009 June, patients who had undergone CT, cephalo AP, lat were investigated. Results: 1. In the 3 D and 2 D images, 10 out of 93 variables (10.4%) and 11 out 44 variables (25%), respectively, showed a significant difference. 2. Landmarks that showed a significant difference in the 2 D image were the points frequently superimposed anatomically. 3. Go Po Orb landmarks, which showed a significant difference in the 3 D images, were found to be the artificial points for analysis in the 2 D image, and in the current definition, these points cannot be used for reproducibility in the 3 D image. Conclusion: Generally, 3-D CT images provide more precise identification of the traditional cephalometric landmark. Greater variability of certain landmarks in the mediolateral direction is probably related to the inadequate definition of the landmarks in the third dimension.

유행의상과 예술의상의 조형적 특성 비교-미래주의 예술의상을 중심으로- (The Comparison of formative Characteristics Clothing in Fashion and Art to Wear.-focused on Art to Wear of Futurism in 1910~1930)

  • 양취경
    • 복식
    • /
    • 제38권
    • /
    • pp.51-72
    • /
    • 1998
  • Futurists objected the existent style, that is the conventional fashion, and took part in these disciplines of fashion to make clothes the instruments being able to represent the individuality. Giacomo Balla and fortunato Depero, pain-ters who in 1915 were to work with Diaghilev's company, were the first to see clothing as a dynamic interfaced between th body and the atmosphere, between physical gestures and the urban context, which could be translated into encounters between forms and colours, volumes and architecture. For them, clothing began to exist as an object and an event, something to be removed from a mainly static conception and made mobile, active. The interaction between movement and clothing was based on the relativity of perception : the appearance and disappearance of the body produced points without dimension or duration which served, as Balla wrote in the Futurist Mnaifesto of Men's Clothing to“renew incessantly the enjoyment and impetuous movement of the body”. The historical achievement in the effort for the reformation of Futurist, Art to Wear. First, for Futurist, clothing is removed from a static conception and focused on dynamics. Second, Balla used asymmetry in men's clothing. Moreover he supposed dynamic men's clothes by using optical intersection. Third, the after image of Chronophotograph represented rapidity. This rhythmic expression is the fore-runner in Optical and Kinetic Art of Visual Art. Fourth, Futurist emphasized flexibility in fashion. They aimed to create‘Clothing Machines’whose parts would interact to aceelerate the real and virtual, inner and outer movement of the human being. Fifth, the variety and short life of cutting skills and colors are focused and‘Fast Substance’in fashion is admitted by Futurists. Futurist concern with clothing was not lim-ited its appearance in terms of cut and colour. What important was also the way it appeared and disappeared according to fashion. It was a“fast substance”, able to reflect rapid, sudden changes of social and aesthetic taste. To reach to the aim of internationalization, Gesamtkunstwerk in our Art to Wear, it is extremely meaningful to examine art fashion which is created under the conception of Gesamtkunstwerk production of avang garde artist in the early 20th century and look at formative conscious of truth, goodess and beauty synthetically which they faced on their works of art.

  • PDF

사회복지사 훈련프로그램의 내용개발을 위한 직무분석: 종합사회복지관의 종사자 훈련에 대한 적용 (Exploring Practice Tasks and KSA of Korean Social Worker : Strategics for Developing Training Contents.)

  • 조성우
    • 한국사회복지학
    • /
    • 제59권2호
    • /
    • pp.115-142
    • /
    • 2007
  • 현직 사회복지사를 대상으로 하는 훈련 프로그램은 현장의 실천내용을 담고 있어야 한다. 이를 실현하기 위해서는 먼저 사회복지사가 실제로 어떤 과업을 수행하고 동시에 과업을 수행하기 위해 어떤 역량(KSA)이 필요한지를 파악하여 이를 훈련에 반영해야 하는 것이다. 본 연구에서는 사회복지사의 실천과업과 역량을 파악하기 위해 사회복지관에 근무하는 전국의 사회복지사 중 340명을 표본추출하여 실천현장에서 활용되는 111개의 실천과업과 업무에 필요한 89개의 지식 기술 능력(KSA)을 가지고 직무분석을 실시하였다. 분석결과, 사회복지사의 실천영역은 '직접서비스', '지역사회서비스', '조직전략 및 인적자원관리', '간접서비스' 영역으로 분류되고, 각 영역별로 중요한 실천과업들이 선정되었다. 동시에 실천현장에서 요구되는 지식, 기술, 능력이 중요도, 필요도, 보유수준 등에 따라 우선순위로 제시되었다. 이상의 결과를 통해 본 연구에서는 사회복지사 훈련 프로그램 내용개발을 위한 제안들을 제시하였다.

  • PDF

공간디자인의 비(非)물질화 경향에 관한 연구 (A Study on the Dematerializing Tendency in Contemporary Space Design)

  • 권영걸
    • 한국실내디자인학회논문집
    • /
    • 제22호
    • /
    • pp.61-68
    • /
    • 2000
  • This paper illustrates what the reality of architectural concepts, materials, notions and phenomena are as central questions of contemporay space design. These issues form the goal of modern space design which should attain to the reality of an era when non-real values prevail. Despite the trends of an everchanging and ephemeral dominating quality in architecture for the last ten years, architects still aim to contruct everlasting space on earth. The trends of dematerialization in today's space design can be substantiated in spatial-temporal dimensions as follows. First of all, ephemeral architecture with concepts of hypothetical temporality, everchanging architecture in fluidity, and the transparent architecture with the floating and overlapping image can be analyzed in the dimension of 'time'. In terms of 'space', void quality for the expression of emptiness, neutral space by the simplified and summarized forms, expanded space through ambiguous boundaries and spatial repetition can becharacterized and also be intended strategies for lightness, state of flux, ambiguity, paradox etc., lead modern space design along that path. As this point, we need to pay attention to the so-called 'hypersurface' concept proposed by Stephen Perella. Hypersurface is a sort of cladding sheathing existence independent from the primary structure. With it, the integration between form and image can be achieved. Sometimes hypersurface can be a strategical screen for image projection, a cognitive receptor for surroundings as well as a catalyst for information and communication systems. When the situation dematerializes more and more as the years go on, the concept of hypersurface can be an inclusive method between the phenomenological form in architecture and its self recipient image. Permissive atmospheres created between them in contemporary space design and new paradigms emerged with digital technology will further reinforce the human space's dynamism.

  • PDF

수은체온계와 고막체온계의 측정치와 측정시 경험에 관한 비교연구 (A comparison study of measured values and subjective experience of mercury thermometer and tympanic thermometer)

  • 민순
    • 한국간호교육학회지
    • /
    • 제4권1호
    • /
    • pp.95-106
    • /
    • 1998
  • This study aims to provide a better nursing service in the dimension of economizing time and human efforts. This is to present some basic knowledge necessary to improving a nursing quality in measuring body temperature by analyzing the contents that the objects experienced at the time of measure with tympanic thermometer and mercury thermometer Subjects of the survey consisted of 71 college students, 47 adult patients and 40 pediatric patients. The results were as follows : 1. The oral temperature by mercury thermometer and tympanic thermometer with oral mode was : $36.83^{\circ}C$ by mercury thermometer and $37.02^{\circ}C$ by tympanic thermometer in college students : it showed an significant difference statistically. 2. Comparsion between oral mode and rectal mode by tympanic thermometer in college students : $37.03^{\circ}C$ by oral mode and $37.55^{\circ}C$ by rectal mode and this defference was significant statistically 3. Comparision between rectal temperature by mercury thermometer and rectal mode of tympanic thermometer : $37.54^{\circ}C$ by mercury thermometer and $37.73^{\circ}C$ by tympanic thermometer, it showed a significant difference statistically. 4. Comparision between oral temperature by mercury thermometer and oral mode of tympanic thermometer of the pediatric patients : $36.51^{\circ}C$ by mercury temperature and $36.94^{\circ}C$ by tympanic thermometer, it showed a significant difference statistically. 5. Comparision between oral body temperature by mercury thermometer and oral mode of tympanic thermometer of the adult patients : $36.56^{\circ}C$ by mercury thermometer and $36.90^{\circ}C$ by tympanic thermometer, it did not show statistically any difference. 6. At the measure by mercury thermometer this data can classified In three main categorise : their feeling to a thermometer, thermometer itself and aspect physical of the clients. It is considered that an subjective experience to tympanic thermometer was more positive.

  • PDF

한국인 척추 연구를 위한 형상 / 물성 정보 구축 (Geometry and Property Database for Korean Spine Research)

  • 이승복;이상호;한승호;곽대순
    • 한국콘텐츠학회논문지
    • /
    • 제11권10호
    • /
    • pp.488-493
    • /
    • 2011
  • 한국과학기술정보연구원과 가톨릭대학교 의과대학 가톨릭응용해부연구소에서는 척추 연구자들이 쉽게 사용할 수 있는 기초 자료를 구축하고 있다. 척추 형상 정보를 제공하기 위해 60-80대 기증시신 20여 표본을 활용하여 고해상도 척추 (whole spine) CT (pixel dimension : 0.4x mm, thickness: 0.6mm)를 촬영하고 이를 3차원 모델링 소프트웨어(Mimics, Ver.14, Materialise, Belgium)를 사용하여 3차원 형상 모델(shell model, STL format)로 구축하고, 목, 등, 허리 척추의 주요 부위를 계측하여 수치화 하였다. 시신기반 자료의 한계를 극복하기 위해 고령자 호발 질환을 중심으로 대상 환자를 선정하여 X-Ray, CT, BMD 자료를 구축하여 보강하고 있다. 물리적 성질 정보 구축은 기증시신 10여 표본을 활용하여 임상적, 물리적 골밀도를 측정하고, 목척추(cervical), 등척추(thoracic), 허리척추(lumbar) 부분의 굽힘-폄(flexion-extension), 가쪽 굽힘(lateral bending), 회전(torsion), 압축(body/disc compression) 시험을 수행하여 작용력과 굽힘량의 관계를 구축하고 있다. 구축된 물성 시험 결과는 형상 모델과 함께 제공되어 자료의 활용도를 높이고 있으며, 이를 이용하여 한국인 특성이 반영된 척추 관련 연구 및 제품 개발에 활용 될 수 있다.

한국 영화가 시도해 볼만한 대안 - 디지털 3D 시네마 (Suggesting Korean Cinema's Alternative - 3D Cinema)

  • 이찬복
    • 한국콘텐츠학회논문지
    • /
    • 제10권4호
    • /
    • pp.123-132
    • /
    • 2010
  • 한국 영화계는 2010년 1월 현재 단 한편의 디지털 3D 실사 장편 영화를 만들어 본 적이 없다. 하지만 3D 시네마에 대한 관심과 열기는 달아오르기 시작해서 2009년에는 7편의 3D 영화를 수입 개봉했고 2010년에는 24편이 정해졌다. 2010년에는 국내 최초의 장편 디지털 3D 시네마로 기록될 "아름다운 우리"가 제작될 예정이다. 곽경택 감독이 연출을 맡은 영화인데 이를 통해서 한국도 본격적으로 3D 시네마 제작국으로 입지를 굳히게 될 것이다. TV는 디지털이 도입되면서 16:9 화면 비율에 HD 고화질로 영화를 위협하기에 이르렀고 영화 역시 무언가 관객에게 매력적으로 어필할 수 있는 변화를 보여줘야 하는 시기가 온 것이다. 컴퓨터 프로그램으로 만들어 낸 3D 애니메이션이 아닌 라이브 액션 3D 시네마는 이러한 막중한 임무를 띠고 등장했다. 예전처럼 어지럽고 피로감이 오는 3D가 아닌 현장에 와있는 것 같은 착각을 줄 정도로 또렷하고 선명한 화질의 3D 시네마는 한국 영화에 고용창출과 적체인력 해소, 수익률 개선 등 다양한 부가 효과를 몰고 올 대안이다.

CACD(Computer Aided Clothing Design)의 발달 및 산업계의 적용 현황에 대한 고찰 (A Study on the Development of CACD(Computer Aided Clothing Design) and the Present Condition Applied for Industry)

  • 우세희;최현숙
    • 한국의상디자인학회지
    • /
    • 제11권1호
    • /
    • pp.87-97
    • /
    • 2009
  • A technology in development called CACD (Computer Aided Clothing Design) can reproduce fashion shows by utilizing computers, and is of particular interest. Considering the growth potential of this area, the purpose of this study is to present the development potentials that CACD technology will bring to the fashion area and to promote the diversity of the fashion industry. This will be realized by identifying the current status of CACD and its reach in the field of Fashion, followed by an in-depth analysis of its application. The methodologies employed in this study are as follows; in-depth study of related literature, field research of business firms, and investigation on Internet data. For the systematic advance of CACD, the development of user-friendly programs for 3D clothing design is of the utmost priority. The four technologies that should be intensively developed to enhance the development of the clothing industry through the utilization and commercialization of CACD are as follows; First, technology capable of performing accurate three-dimension measurement of the human body is needed. Second, technology which realizes automatic pattern formation is needed. Third, the nature physical properties of the material and textile design when applied to pre-formed patterns must be expressed similarly to the real thing. Last of all, an integrative technology which can conduct fast and accurate clothing simulations must be developed.

  • PDF

Functional Neuroimaging of General Fluid Intelligencein Prodigies

  • Lee, Kun-Ho
    • 한국영재학회:학술대회논문집
    • /
    • 한국영재학회 2003년도 춘계학술대회
    • /
    • pp.137-138
    • /
    • 2003
  • Understanding how and why people differ is a fundamental, if distant, goal of research efforts to bridge psychological and biological levels of analysis. General fluid intelligence (gF) is a major dimension of individual differences and refers to reasoning and novel problemsolving ability. A conceptual integration of evidence from cognitive (behavioral) and anatomical studies suggeststhat gF should covary with both task performance and neural activity in specific brain systems when specific cognitive demands are present, with the neural activity mediating the relation between gF and performance. Direct investigation of this possibility will be a critical step toward a mechanistic model of human intelligence. In turn, a mechanistic model might suggest ways to enhance gF through targeted behavioral or neurobiological intervent ions, We formed two different groups as subjects based on their scholarly attainments. Each group consists of 20 volunteers(aged 16-17 years, right-handed males) from the National Gifted School and a local high school respectively. To test whether individual differences in general intelligence are mediated at a neural level, we first assessed intellectual characteristics in 40 subjects using standard intelligence tests (Raven's Advanced Progressive Matrices, Wechsler Adult Intelligence Scale, Torrance Tests of Creative Thinking) administered outside of the MR scanner. We then used functional magnetic resonance imaging (fMRl) to measure task-related brain activity as participants performed three different kinds of computerized reasoning tasks that were intended to activate the relevant neural systems. To examine the difference of neural activity according to discrepancy in general intelligence, we compared the brain activity of both extreme groups (each, n=10) of the participants based on the standard intelligence test scores. In contrast to the common expectation, there was no significant difference of brain region involved in high-g tasks between both groups. Random effect analysis exhibited that lateral prefrontal, anterior cingulate and parietal cortex are associated with gF. Despite very different task contents in the three high-g-low-g contrasts, recruitment of multiple regions is markedly similar in each case, However, on the task with high 9F correlations, the Prodigy group, (intelligence rank: >99%) showed higher task-related neural activity in several brain regions. These results suggest that the relationship between gF and brain activity should be stronger under high-g conditions than low-g conditions.

  • PDF