• 한국멀티미디어학회논문지
• /
• 제25권8호
• /
• pp.1122-1135
• /
• 2022

With the development of digital technology and the influence of the global pandemic, the metaverse, a three-dimensional virtual world, is receiving attention in society, economy and overall industry, and the manufacturing industry is also accepting it as a major strategic agenda for digital transformation. Therefore, in this study, the concept of the industry metaverse from the perspective of the manufacturing industry was defined, and the types of the industry metaverse were classified into four types by reflecting the characteristics of the manufacturing industry based on the general metaverse scenario presented in previous studies. These are Virtual behavior simulation, Augmented operation of business objects and Virtual experience simulation, Augmented decision of business subjects. In addition, through case analysis of solutions used in the manufacturing industry, it was confirmed that the central technology of the Industry Metaverse is the digital twin, and that it is being implemented by convergence with major digital technologies such as virtual reality, augmented reality, digital human, and AI. This study will be able to provide guidelines for future research on the metaverse from the perspective of the manufacturing industry and establishment of a digital transformation strategy for the industry.

• 대한토목학회논문집
• /
• 제32권3D호
• /
• pp.189-196
• /
• 2012

지난 50여 년간 고도의 경제 성장은 급격한 자동차의 증가를 초래하였다. 이러한 자동차 증가는 도시 내에서 도로혼잡, 교통사고, 환경오염, 소음과 진동을 발생시켜, 결국 교통의 주체인 사람이 피해를 보게 되는 사회문제로 대두되고 있다. 이로 인해 녹색교통, 특히 보행의 중요성에 대한 관심이 높아지고 있으며, 그중 보행 관련시설의 설치가 확대되고 있다. 그러나 보행시설이 잘못 설계될 경우, 보행의 쾌적성과 안전성을 저하시킬 수 있어 주의를 요한다. 본 연구는 기존 지하철 환승역 내에서 조사된 보행자의 움직임을 마이크로하게 추적, 분석하여 보행동선의 문제점을 찾아 대안들을 제시하며, 대안들의 시행 전과 후의 보행환경의 변화를 추정한다. 이때 시뮬레이션 프로그램으로는 유럽에서 통용되고 있지만 국내에서는 아직 적용이 미흡한 SimWalk 프로그램을 이용하였다. 또한 이 프로그램의 장단점을 분석하여 국내 적용 가능성을 진단하였다. 이와 같은 시뮬레이션의 이용은 개선 대안의 시행 전에 면밀한 사전 비교 분석을 가능케 하여 시행착오를 최소화할 수 있을 것으로 판단된다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회A
• /
• pp.1709-1712
• /
• 2008

The trunk is inclined to the loaded side when carrying an object as one of activities of daily living. As the reaction to this behavior the human body may be inclined to his/her trunk to unloaded side. The present study investigated the biomechanical effects of weight variation for sided load carriage during walking upon joint moments and muscle torques, through the tracker agent and joint driving dynamic analysis. To perform the experiment one male was selected as subject for the study. Gait analysis was performed by using a 3D motion analysis system. Thirty nine 14mm reflective markers, according to the plug-in marker set, were attached to the subject. We used BRG.LifeMOD(Biomechanics Research Group, Inc., USA), for skeletal modeling and inverse and joint driving dynamic simulation during one gait cycle. In walking with a sided load carriage, the subject modeled held the carriage with the right hand, which weighed 0, 5, 10, 15kg, 20kg respectively. The result of this simulation showed that knee and hip in the coronal plane were inclined to the loaded side and loaded side had larger moments as the sided load carriage was increased. On the other hand thoracic and lumbar in the coronal plane had larger negative values as the sided loaded carriage was increased. The thoracic and lumbar in the transverse plane also had larger values as the sided load was increased. And the several muscles of loaded side were increased as increasing sided load. It could be concluded that human body is adopted to side loaded circumstances by showing more biologic force. These results could be very useful in analysis for delivery motion of daily life.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2008년도 추계학술대회 논문집
• /
• pp.329-332
• /
• 2008

Nowadays, It is required human body-friendly, good mechanical properties, and economical efficiency material, simultaneously. The material to meet above requirement condition rear up high nitrogen stainless steel(HNS). However, HNS have a lot of problem such as poor workability, hot crack sensitivity. So, It is needed the condition of plastic working to overcome above many problem. In this study, VIM ingot with 100kg was made by pressurized vacuum induction melting. And then, The slab perform for hot rolling was prepared by open-die forging. Hot rolling process was performed by computer simulation according to change of height reduction, rolling temperature, heating numbers, rolling pass and so forth. The results of analysis were investigated between analysis and lab-scale rolling product.

• 로봇학회논문지
• /
• 제12권3호
• /
• pp.258-262
• /
• 2017

In this paper, we propose a new collision detection algorithm for human-robot collaboration. We use an IMU sensor located at the tip of the manipulator and the kinematic behavior of the manipulator to detect the unexpected collision between the robotic manipulator and environment. Unlike other method, the developed algorithm uses only the kinematic relationship between the manipulator joint and the end effector. Therefore, the collision estimation signal is not affected by the error of the dynamics model. The proposed collision detection algorithm detects the collision by comparing the estimated acceleration of the end effector derived from the position, velocity and acceleration trajectories of the robot joints with the actual acceleration measured by the sensor. In simulation, we compare the performance of our method with the conventional Residual Observer (ROB). Our method is less sensitive to the load variation because of the independency on the dynamic modeling of the manipulator.

• 연구논문집
• /
• 통권23호
• /
• pp.73-80
• /
• 1993

This study presents an intelligent PID control method based on the fuzzy logic and this method is applied to the active magnetic bearing system. By using an appropriate fuzzy matrix, some changes of values of the three coefficients of the controller are determined during system operation and these lead to the improvement of the transient and steady state behavior of the closed loop system. The presented method is actually a combination of the principles of PID control and fuzzy logic. Since the fuzzy logic using linguistic variables in place of numeric variables has many points of likeness to the human logic, the improvement in performance is notable especially in case of large nonlinearity and uncertainty such as the controller start and the excessive mass unbalance. A set of simulation and experimental results illustrate and considerable improvement in the control performance including small overshoot and small transient currents in magnet coils, while maintaining the overal static and dynamic characteristics near the equilibrium position.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1996년도 한국자동제어학술회의논문집(국내학술편); 포항공과대학교, 포항; 24-26 Oct. 1996
• /
• pp.1527-1530
• /
• 1996

Telerobot system is being developed for the application to nuclear power plants by Korea Atomic Energy Research Institute. Human-machine interaction and interface are very important elements of telerobotic systems. The main purpose of this study is developing a control system based on 3-D graphic techniques for the easy user interface and realistic visual I information supply. This system possesses the abilities for (1) virtual work, environment modelling and simulation, (2) kinematic animation include redundant behavior (3) interfacing with a real robot system, (4) transformation between real and virtual mode within the same graphics system. This system is especially focused on enhancing the overall efficiency and reliably of nozzle dam installation task inside water chamber of steam generator in nuclear power plant.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2005년도 ICCAS
• /
• pp.931-934
• /
• 2005

This paper describes an adaptive recommendation system that provides real-time personalized trading advice to the investors based on their profiles and trading information environment. A proposed system integrates Stochastic technical analysis and artificial neural network that incorporates an adaptive user modeling. The user model is constructed and updated based on initial user profile and recorded user interactions with the system. The information presented to each individual user is also tailor-made to fit the user's behavior and preference. A system prototype was implemented in JAVA. Experiments used to evaluate the system's performance were done on both human subjects and synthetic users. The results show our proposed system is able to rapidly learn to provide appropriate advice to different types of users.

• Journal of Mechanical Science and Technology
• /
• 제19권9호
• /
• pp.1742-1752
• /
• 2005

This paper presents a Multiple Target Tracking (MTT) Adaptive Cruise Control (ACC) system which consists of three parts; a multi-model-based multi-target state estimator, a primary vehicular target determination algorithm, and a single-target adaptive cruise control algorithm. Three motion models, which are validated using simulated and experimental data, are adopted to distinguish large lateral motions from longitudinally excited motions. The improvement in the state estimation performance when using three models is verified in target tracking simulations. However, the performance and safety benefits of a multi-model-based MTT-ACC system is investigated via simulations using real driving radar sensor data. The MTT-ACC system is tested under lane changing situations to examine how much the system performance is improved when multiple models are incorporated. Simulation results show system response that is more realistic and reflective of actual human driving behavior.

• 한국실내디자인학회논문집
• /
• 제37호
• /
• pp.119-128
• /
• 2003

The goal of this study was to understand human behavior in reference to wayfinding during emergency situations. In an emergency situation, it is recommended that evacuees follow instructions about an available exit rather than finding their way on their own. Wayfinding studies suggest that landmarks affect entire route communication. Landmark analysis for this study Identified describability, e.g., name and simplicity of landmark features. A virtual reality (VR) simulation test was conducted to examine the effect of landmarks on wayfinding. The independent variables were landmarks, smoke. Results suggest that the describability of landmarks is a positive Influence to route communication. Findings from this study, however, Indicates that smoke condition did not significantly affect participants' wayfinding.