• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.28 no.4
• /
• pp.141-146
• /
• 2020

The International Civil Aviation Organization (ICAO) developed Doc 9995 "Manual of Evidence-based Training," with the intention of providing guidance by establishing a new methodology for the development and conduct of a recurrent training and assessment program. The airline pilot training regulations were largely based on the evidence of hull losses from early generation jets, and in order to mitigate a risk, simply repeating an event in a training program was sufficient. At the time, studies concluded that it was time to change the paradigm of training and assessment program for pilots. One airline alone implemented Evidence-Based Training (EBT) program in their flight crew training and assessment program while another airline partially implemented the EBT program. In the regulatory framework of MOLIT, specific EBT regulations have not been established yet. Therefore, it is recommended to develop rules and standards that comply with ICAO SARPs as soon as possible. In this study we review the key steps in the implementation of the baseline EBT, approval process of baseline EBT program, and policy options regarding the implementation of EBT. It will provide guidance to operators, Approved Training Organizations (ATO), and stakeholders.

• The Journal of Asian Finance, Economics and Business
• /
• v.8 no.2
• /
• pp.151-164
• /
• 2021

The paper identifies the enablers (drivers) and inhibitors (barriers) influencing e-customs implementation in Vietnam (known as a developing country with a lower technological environment) along with determining the impact of e-customs on firm performance. The survey was conducted with the representatives (managers) of firms in five cities and provinces dominating Vietnam's international trade. The data was analyzed using structural equation modeling (SEM). The findings show two significant drivers (enablers) - relative advantages and national culture, while compatibility and ease of use are the barriers. Previous studies showed that cultural dimensions related to 'uncertainty acceptance' and 'individualism' encourage innovation; however, this paper demonstrates that 'uncertainty avoidance' and 'collectivism' promote e-customs deployment in Vietnam. Previously, Vietnamese culture was known for scoring high on cultural dimensions related to 'power distance' and 'short-term orientation'. However, today, as an emerging country, Vietnamese has switched to 'low distance' and 'long-term orientation', especially in terms of e-customs innovation. Additionally, the paper also emphasized that e-customs implementation had a positive influence on firm performance in Vietnam. Based on the results of the paper, policy-makers can devise essential solutions to enhance e-customs implementation as well as managers of firms can set-up strategies to adapt to the modernized environment.

• Journal of the Society of Naval Architects of Korea
• /
• v.60 no.1
• /
• pp.38-47
• /
• 2023

According to the government policy of environmental regulations, interest of ship, which made with High-Density Polyethylene (HDPE) as a low-carbon and eco-friendly material, is growing as a substitute for the existing fishery boat hull materials such as FRP, aluminum, steel etc. However, regulations related to the production of HDPE ship are still quite incomplete. Even there are no regulations related to structural analysis. Therefore, in this study, structural analysis is carried out by applying different design loads for each international classification for 38ft class HDPE power boats, and the results are compared and analyzed. According to this study, although there is a correlation between the based pressure value and the analysis result value of each class regulation, it is not necessarily proportional. Also, This analysis result shows a difference not only depending on the size of design load, but also application range of the load, the pressure adjustment factor and section shape. However, the occurrence point and trend of the maximum stress values were quite consistent. It is hoped that the results of this study will be used when establishing HDPE ship structure analysis procedures and standards in the future.

• Journal of Korea Trade
• /
• v.25 no.2
• /
• pp.152-177
• /
• 2021

Purpose - This study analyses the excepted requirement and burden of proof of the carrier due to unseaworthiness through comparison between the marine transport contract and marine insurance contract. Design/methodology - This study uses the legal analytical normative approach. The juridical approach involves reviewing and examining theories, concepts, legal doctrines and legislation that are related to the problems. In this study a literature analysis using academic literature and internet data is conducted. Findings - The burden of proof in case of seaworthiness should be based on presumed fault, not proved fault. The burden of proving unseaworthiness/seaworthiness should shift to the carrier, and should be exercised before seeking the protections of the law or carriage contract. In other words, the insurer cannot escape coverage for unfitness of a vessel which arises while the vessel is at sea, which the assured could not have prevented in the exercise of due diligence. The insurer bears the burden of proving unseaworthiness. The warranty of seaworthiness is implied in hull, but not protection and indemnity policies. The 2015 Act repeals ss. 33(3) and 34 of MIA 1906. Otherwise the provisions of the MIA 1906 remain in force, including the definition of a promissory warranty and the recognition of implied warranties. There is less clarity about the position when the source of the loss occurs before the breach of warranty but the actual loss is suffered after the breach. Nonetheless, by s.10(2) of the 2015 Act the insurer appears not to be liable for any loss occurring after the breach of warranty and before there has been a remedy. Originality/value - When unseaworthiness is identified after the sailing of the vessel, mere acceptance of the ship does not mean the party waives any claims for damages or the right to terminate the contract, provided that failure to comply with the contractual obligations is of critical importance. The burden of proof with regards to loss of damage to a cargo caused by unseaworthiness is regulated by the applicable law. For instance, under the common law, if the cargo claimant alleges that the loss or damage has been caused by unseaworthiness, then he has the burden of proof to establish the followings: (i) that the vessel was unseaworthy at the beginning of the voyage; and that, (ii) that the loss or damage has been caused by such unseaworthiness. In other words, if the warranty of seaworthiness at the inception of the voyage is breached, the breach voids the policy if the ship owner had prior knowledge of the unseaworthy condition. By contrast, knowingly permitting the vessel to break ground in an unseaworthy condition denies liability only for loss or damage proximately caused by the unseaworthiness. Such a breach does not, therefore, void the entire policy, but only serves to exonerate the insurer for loss or damage proximately caused by the unseaworthy condition.

• Korean Journal of Environmental Agriculture
• /
• v.28 no.2
• /
• pp.131-138
• /
• 2009

Heavy metal residues in soil, rice straw, unhulled rice, rice hull, polished rice, and rice barn on the rice paddy in the "Top rice production complex which is non-contaminated area were evaluated. It was observed that the average concentrations of As, Cd, Cu, Pb, and Hg in the paddy soils were 1.235, 0.094, 4.412, 4.728 and 0.0279 mg/kg, respectively. There were no cultivation areas exceeded of the threshold for soil contamination designated by "The Soil Environment Conservation Law" in Korea. For the polished rice, there were no samples exceeded of a permissible level of heavy metal residues such as 0.051 mg/kg of As, 0.040 mg/kg of Cd, 0.345 mg/kg of Cu, 0.065 mg/kg of Pb and 0.0015 mg/kg of Hg. For the uptake and translocation of heavy metals to rice plant, a main part of heavy metal accumulation was rice straw, and then rice bran. Furthermore, it shown that accumulation of heavy metals in unhulled rice, rice hulls, brown rice, and polished rice was approximately similar as low. The slopes of translocation of heavy metals from soil to polished rice were following order as Cd, 0.4321 > Cu, 0.054 ${\fallingdotseq}$ Hg, 0.052 > As, 0.021 > Pb, 0.008. It was observed that potential ability of Cd uptake in rice plant and then its translocation into polished rice was very high. Concentrations of copper and mercury absorbed in the rice plant were moderate for translocating into the polished rice, while the arsenic and lead in the plant were scarcely translocated into the polished rice. The distribution of heavy metals absorbed and translocated into aboveground parts of rice plant was appeared that there were remained at 63.3-93.4% in rice straw, 6.6-36.9% in unhulled rice, 0.6-5.7% in rice hulls, 3.2-31.3% in brown rice, 0.8-4.6% in rice bran and 1.1-26.7% in polished rice. The accumulation ratio of Cd in the aboveground parts of rice plant was remained at 26.7-31.3% in brown and polished rice.