• 설비공학논문집
• /
• 제7권4호
• /
• pp.566-576
• /
• 1995

A Computational code has been developed in order to design axial fans by the numerical optimization techniques incorporated with flow analysis code solving three-dimensional Navier-Stokes equation. The steepest descent method and the conjugate gradient method are used to look for the search direction in the design space, and the golden section method is used for one-dimensional search. To solve the constrained optimization problem, sequential unconstrained minimization technique, SUMT, is used with imposed quadratic extended interior penalty functions. In the optimization of two-dimensional cascade design, the ratio of drag coefficient to lift coefficient is minimized by the design variables such as maximum thickness, maximum ordinate of camber and chord wise position of maximum ordinate. In the application of this numerical optimization technique to the design of an axial fan, the efficiency is maximized by the design variables related to the sweep angle distributed by quadratic function along the hub to tip of fan.

• Journal of Mechanical Science and Technology
• /
• 제20권10호
• /
• pp.1753-1764
• /
• 2006

A U-80 propeller and its modified version, U-75 propeller, are used for a micro air vehicle. The performance characteristics of a U-80 propeller and a U-75 propeller have not much known in the published literature. Thus, their aerodynamic characteristics are investigated using a lifting surface numerical method. The lifting surface method is validated by comparing computed results with measured data in a wind tunnel. From the computed results, it is found that the U-75 propeller produces larger thrust with higher efficiency than the U-80 propeller. To enhance the performance of these propellers, a new propeller is designed by following the sequential design procedures with the design parameters such as hub-tip ratio, maximum camber and its position, and chord length distribution along the radial direction. The performance of the designed propeller is shown to be improved much comparing with those of both the U-80 and U-75 propellers.

• Wind and Structures
• /
• 제32권2호
• /
• pp.81-87
• /
• 2021

The aim of the current study is to compare the performance of large 2 MW and 3 MW wind turbines operating on existing onshore wind farms using Blade Element Momentum (BEM) theory and Angular Momentum (AM) theory and illustrate the performance characteristic curves of the turbines as a function of wind speed (U∞). To achieve this, the measurement data obtained from two different Wind Energy Power Plants (WEPPs) located in the Hatay region of Turkey was used. Two different horizontal-axis wind turbines with capacities of 2 MW and 3 MW were selected for evaluation and comparison. The hub-height wind speed (UD), turbine power output (P), atmospheric air temperature (Tatm) and turbine rotational speed (Ω) data were used in the evaluation of the turbine performance characteristics. Curves of turbine power output (P), axial flow induction factor (a), turbine rotational speed (Ω), turbine power coefficient (CP), blade tip speed ratio (λ), thrust force coefficient (CT) and thrust force (T) as a function of U∞ were obtained for the 2 MW and 3 MW wind turbines and these characteristic curves were compared. Results revealed that, for the same wind speed conditions, the higher-capacity wind turbine (3 MW) was operating at higher turbine power coefficient rates, while rotating at lower rotational speed ratios than the lower-capacity wind turbine (2 MW).

• 한국항공우주학회지
• /
• 제35권10호
• /
• pp.891-898
• /
• 2007

피치 제어형 수평축 풍력터빈에 대한 공력최적 설계 형상과 피치 변화에 따른 공력 성능 특성을 수치적으로 계산하였다. 수치적 방법은 날개 요소이론을 적용하였으며, Prandtl의 팁 손실 효과, 에어포일의 분포 효과, 후류의 회전 효과 등을 고려하였다. 블레이드 설계에는 총 6개의 서로 다른 에어포일을 사용하였으며, 구조적 강성을 갖기 위해서 허브 측에는 최대 40% 두께비의 에어포일을 분포시켰다. 최적 설계에서 얻어진 비선형 코드 길이는 제작성과 무게 등을 고려하여 선형화 시켰고, 선형화에 따른 공력성능 변화는 무시할만하다는 결과를 얻어내었다. 피치각 변화에 따른 동력성능, 추력성능, 토크 성능 곡선을 비교한 결과 $3^{\circ}$의 피치각 변화에도 민감한 공력 값의 변동이 생김을 알 수 있었고, 정밀한 피치 제어를 위한 각도 제어는 증분이 $3^{\circ}$보다 작은 값으로 피치 제어 알고리즘과 피치 구동 장치가 필요함을 알 수 있었다. 또한 최대 토크는 설계속도비보다 작은 속도비에서 발생되는 결과를 보여주었다.

• 한국항공우주학회지
• /
• 제38권10호
• /
• pp.955-965
• /
• 2010

초소형 무인기 추진용 MH-75 프로펠러는 자유와 설계기법을 이용하여 설계변수인 허브팁 비, 비틀림각 분포, 최대 캠버의 위치와 크기 그리고 시위 길이를 변화시키며 설계 요구조건을 만족하도록 공력설계 되었다. MH-75 프로펠러는 주파수영역 패널법을 이용하여 설계요구조건을 만족시키고, 다양한 초소형 무인기에 적용이 가능하도록 정지추력 특성과 비행속도 및 회전수 변화에 따른 성능 특성을 예측하였다. 그리고 MH-75 프로펠러의 공력해석 결과를 검증하기 위해 프로펠러의 추력특성에 대한 풍동시험을 수행하였다. MH-75 프로펠러의 추력 성능은 설계요구조건을 만족하였으며, 저레이놀즈 수 영향을 고려하기 위한 2차원 익형 해석용 XFOIL 프로그램에 비해 3차원 효과를 고려하는 주파수영역 패널법을 이용하는 것이 비교적 풍동시험 결과와의 오차가 적음을 확인하였다.

• Journal of Power Electronics
• /
• 제15권4호
• /
• pp.1047-1053
• /
• 2015

A time-domain simulation tool to predict the dynamic power output of wind turbines in an offshore wind farm was developed in this study. A wind turbine model consisting of first or second order transfer functions of various wind turbine elements was combined with the Ainslie's eddy viscosity wake model to construct the simulation tool. The wind turbine model also includes an aerodynamic model that is a look up table of power and thrust coefficients with respect to the tip speed ratio and pitch angle of the wind turbine obtained by a commercial multi-body dynamics simulation tool. The wake model includes algorithms of superposition of multiple wakes and propagation based on Taylor's frozen turbulence assumption. Torque and pitch control algorithms were implemented in the simulation tool to perform max-Cp and power regulation control of the wind turbines. The simulation tool calculates wind speeds in the two-dimensional domain of the wind farm at the hub height of the wind turbines and yields power outputs from individual wind turbines. The NREL 5MW reference wind turbine was targeted as a wind turbine to obtain parameters for the simulation. To validate the simulation tool, a Danish offshore wind farm with 80 wind turbines was modelled and used to predict the power from the wind farm. A comparison of the prediction with the measured values available in literature showed that the results from the simulation program were fairly close to the measured results in literature except when the wind turbines are congruent with the wind direction.