• Preventive Nutrition and Food Science
• /
• v.8 no.4
• /
• pp.356-364
• /
• 2003

A methanol extract from seeds of Paeonia lactiflora (Paeoniaceae, peony) was found to possess different antiproliferative activities against four different human cancer cell lines: Hela, MCF-7, HepG2 and HT-29. Furthermore, five different methanol (20, 40, 60, 80 and 100 % MeOH) fractions obtained by fractionation of the methanol extract of the seeds on a Diaion HP-20 column exhibited differential antiproliferative effects against the above four cancer cell lines. Among five fractions, the 60 % MeOH fraction showed relatively lower antiproliferative activity on MCF-7 estrogen-sensitive breast cancer cell than the other cancer cell lines. Systematic separation of 60% the MeOH fraction by silica gel and Sephadex LH-20 columns led to the isolation of four known stilbenes, trans-resveratrol (1), trans-(+)- $\varepsilon$ -viniferin (2), gnetin H (3) and suffruticosol B (4). The four stilbenes (1∼4) exerted differential biphasic effects on cell proliferation of MCF-7 cells in a similar manner as genistein, a soybean isoflavone used as a positive reference, in the concentration range from 1.0 to 200 $\mu$M. Three stilbenes (1 ∼ 3) weakly stimulated the proliferation of MCF -7 cells at doses below 10 JIM. However, strong antiproliferative effects on MCF-7 cell were exerted by extract 1 at a dose of 200 JIM, and by 2 and 3 at doses above 25 $\mu$M. In contrast, 4 inhibited the proliferation of MCF-7 cell at a dose below 25 $\mu$M, but stimulated cell proliferation at concentrations of 50 and 100 $\mu$M. All four stilbenes (1∼4) stimulated the proliferation of ROS 17/2.8 osteoblast-like cells in the range of 10$^{-10}$ ∼10$^{-1}$ $\mu$M. Compound 1 exhibited especially potent proliferative activity, although its activity was weaker than that of genistein. Additionally, three resveratrol oligomers (2∼4) also exhibited concentration-dependently moderate proliferative activity, but less than that of 1. These results suggest that resveratrol, and its dimer and trimers from the seeds of Paeonia lactiflora may act as a phytoestrogen, but in a somewhat different manner from that of genistein.

• Proceedings of the Safety Management and Science Conference
• /
• 2002.05a
• /
• pp.73-80
• /
• 2002

본 연구는 U자형 생산라인(U라인)에서의 라인밸런싱 문제를 해결하기 위한 유전알고리즘을 제시한다. U라인에서는 사이클 타임 내에 제품이 들어가는 방향과 나오는 방향의 작업을 한 작업자가 수행 할 수 있어서, 재공품 수량을 일정하게 유지한다거나 작업부하를 평활화 하는 등의 라인관리가 기존 직선라인에 비해 용이하다. U라인은 JIT(Just-ln-Time)생산 시스템에서 흔히 볼 수 있다. 본 연구는 U라인에서 사이클 타임이 고정되었을 때 작업장 또는 작업자의 수를 최소로 하면서 동시에 작업장에 할당된 작업들 간의 관련성을 최대화하는 라인밸런싱 문제를 다루었다. 라인밸런싱에 관한 기존 연구는 대부분 직선라인에 관한 것으로 U라인의 장점을 충분히 활용하지 못한다. 특히, 라인의 작업장의 수를 최소화하는 문제는 많은 대안해가 있음에도 불구하고, 작업관련성을 고려하여 해를 구하는 기법에 관한 연구는 아직 미미한 실정이다. 실제 조립라인에서는 가능한 한 관련된 작업들을 동일한 작업자에 할당하는 것이 바람직하며, 이러한 작업편성은 작업자의 작업능률을 향상시킬 수 있다. 유전알고리즘은 자연계의 적자생존과 생물학적 진화과정을 모방한 탐색기법으로 조합최적화 문제에 효과적인 기법으로 널리 알려져 있다. 본 연구는 유전알고리즘을 이용하여 U라인에서 작업관련성을 고려한 라인밸런싱 문제를 해결하기 위한 기법을 개발하였다. 문제의 목적에 적합한 개체의 평가함수가 제시되었으며, 개체의 형질을 효과적으로 자손에 유전할 수 있고 유전 연산이 용이한 개체의 표현방법과 개체의 해석방법이 제시되었다. 컴퓨터 실험을 통하여 개발한 알고리즘의 성능을 보였다.월 초순부터 중순에 각각 최고 성기를 나타내었다. H. papariensis의 암컷과 수컷의 발광양상을 분석하고자 정지발광과 구애 발광을 구분하여 조사하였고 각각의 발광지속시간과 발광주기를 구분하여 측정하였다. 수컷의 발광지속시간은 정지발광(0.12초)보다 구애발광(0.17초)에서 1.4배 증가하였으며 암컷의 발광지속시간은 정지발광(0.15초)보다 구애발광(0.19초)에서 1.5배 증가하였다. 발광주기는 수컷에서 정지발광(1.26초)보다 구애발광(1.12초)에서 0.88배 감소하였고, 암컷에서 정지발광(2.99초)보다 구애발광(1.06초)에서 0.35배 감소하였다. 발광양상에서 발광주파수는 수짓의 정지발광에서 0.8 Hz, 수컷 구애발광에서 0.9 Hz, 암컷의 정지발광에서 0.3 Hz, 암컷의 구애발광에서 0.9 Hz로 각각 나타났다. H. papariensis의 발광파장영역은 400 nm에서 700 nm에 이르는 모든 영역에서 확인되었으며 가장 높은 첨두치는 600 nm에 있고 500에서 600 nm 사이의 파장대가 가장 두드러지게 나타났다. 발광양상과 어우러진 교미행동은 Hp system과 같은 결과를 얻었다.하는 방법을 제안한다. 즉 채널 액세스 확률을 각 슬롯에서 예약상태에 있는 음성 단말의 수뿐만 아니라 각 슬롯에서 예약을 하려고 하는 단말의 수에 기초하여 산출하는 방법을 제안하고 이의 성능을 분석하였다. 시뮬레이션에 의해 새로 제안된 채널 허용 확률을 산출하는 방식의 성능을 비교한 결과 기존에 제안된 방법들보다 상당한 성능의 향상을 볼 수 있었다., 인삼이 성장될 때 부분적인 영양상태의 불충분이나 기후 등에 따른 영향을

• Journal of Radiation Protection and Research
• /
• v.41 no.3
• /
• pp.268-273
• /
• 2016

Background: This study was a long-term evaluation of $^{137}Cs$ and $^{90}Sr$ activity concentrations in seawater samples from the East Sea, Korea, in order to establish current activity levels. Results and long-term monitoring trends will be useful in the future monitoring of environmental radioactivity. Materials and Methods: Surface seawater samples were collected quarterly from Guryongpo and Jangho in the East Coast between 1998 and 2010 and the quarterly deep seawater samples were collected from three sites in the sea adjacent to Ulleung-do between 2012 and 2015. The activity concentrations of $^{137}Cs$ were measured using a gamma-spectrometer. The activity concentrations of $^{90}Sr$ and $^{90}Y$ in a radioactive equilibrium state were measured using a gas flow proportional counter. Results and Discussion: We found the annual average activity concentrations of $^{137}Cs$ in the surface seawater was $1.66-2.89mBq{\cdot}kg^{-1}$ in Guryongpo and $1.68-2.43mBq{\cdot}kg^{-1}$ in Jangho. The annual average activity concentrations of $^{90}Sr$ in the surface seawater was $0.83-1.98mBq{\cdot}kg^{-1}$ in Guryongpo and $0.82-1.57mBq{\cdot}kg^{-1}$ in Jangho. The annual average activity concentrations of $^{137}Cs$ in the deep seawater sites were $1.51-1.73mBq{\cdot}kg^{-1}$, $1.19-1.60mBq{\cdot}kg^{-1}$ and $0.87-1.15mBq{\cdot}kg^{-1}$ in TH, JD, and HP. The annual average activity concentrations of $^{90}Sr$ in the same deep seawater sites were $1.00-1.94mBq{\cdot}kg^{-1}$, $0.82-1.26mBq{\cdot}kg^{-1}$, and $0.79-1.32mBq{\cdot}kg^{-1}$. The effective half-life was calculated by analyzing change over time in the activity concentration in the surface seawater. The effective half-life of $^{137}Cs$ was $15.3{\pm}0.1years$ in Guryongpo and $102{\pm}3years$ in Jangho. The effective half-life of $^{90}Sr$ was $28.3{\pm}4.3years$ in Guryongpo and $16.6{\pm}0.1years$ in Jangho. The ratio of the average activity concentration ($^{137}Cs/^{90}Sr$) was 1.72 in the surface seawater, which is similar to the reported ratio of the global radioactive fallout. The ratio in the deep seawater was 1.24, which is somewhat low compared to the global ratio (1.6, 1.8). Conclusion: Activity concentrations of $^{137}Cs$ and $^{90}Sr$ in the seawaters of the East Sea were similar to the previously reported activity levels in the East Sea and northwestern Pacific as a result of global radioactive fallout following atmospheric nuclear weapon tests.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.23 no.4
• /
• pp.292-303
• /
• 2011

A new type of sand bypassing system is proposed for recovering the eroded beach in this study. This system provides an added methodology to the soft defence which is main recovery method for the coastal shore protection in the world. The study proposes a conceptional design and manufacturing procedure for the relatively small size machine of sand bypassing. In order to get the discharging volume information, the power capacity of the system is tested in the field. The discharge rate of the new system shows up to the expected maximum of 618 ton/hr which is 9.6% lower than that by theoretical calculation. It gives a resonable agreement in this system when the flow is assumed to be of the high density. In this study, the delivering volume of sand is estimated according to the discharge rate. The combination of 300 mm(12 inch) intake and 250 mm(10 inch) discharge pipe line has the pumping capacity of $103\;m^3/hr$ which is nearly the same as that of South Lake Worth Inlet sand bypassing system, Florida, U.S.A.. The proposed system added the mobility to its merit. The unit price of Florida's sand bypassing is $$8~9/m^3$ (US). The system would be economically suitable for small volume of sand because no additional equipment is necessary for the intake. The diesel fuel of 25~30 l/hr was consumed during the system operation. The multiple working system would be the next investigation target for large volume of sand.

• Proceedings of the Safety Management and Science Conference
• /
• 2003.05a
• /
• pp.43-51
• /
• 2003

제품 설계 및 디자인의 과정이 고도로 높은 기술력을 바탕으로 이루어지고 있으며, 국내의 기업체도 우수한 기술력과 높은 품질로 경쟁력을 키우며 다양한 고객의 요구에 대응하여 고객만족을 꾀하여야 한다 이의 기반이 되는 제품의 품질과 사양은 설계에서 시작되는데 아직 국내의 많은 기업들은 설계 및 제작 단계에서 많은 시간과 비용을 낭비하고 있다. 3D Modeling Solution은 설계오류가 적으며 시각적인 설계를 할 수 있어 최소의 인력으로 제품을 설계할 수 있는 장점이 있지만 너무 많은 기능으로 인해 사용자가 쉽게 적용하고 사용하기 어려운 단점을 가지고 있다. 본 연구에서는 이러한 산업현장의 어려움을 덜기 위해 3D 전용 Modeling Solution에 사용자가 쉽게 부품을 조림할 수 있는 엔진을 접목시켜 누구나 사용가능하고 신속한 신제품 개발이 이루어지도록 하였다. 본 연구에서는 Autodesk사의 Inventor와 Microsoft Visual Basic으로 Inventor에서 제공하고 있는 API함수를 이용하여 조립자동화를 위한 조립조건 생성, 조립자동화, 부품 재질변경, 수동조립 그리고 부품의 DB화를 구현하였다. 이 프로그램은 조립조건 설정 폼을 이용하여 부품의 조립속성을 생성하고 부품조립 폼을 이용하여 조립자동화를 실행할 수 있도록 하였다. 또한 모든 부품을 Database화 하여 부품을 손쉽게 탐색할 수 있으며, 추후에도 언제든지 재사용이 가능하여 제품설계 효율성을 극대화 할 수 있다. 현장 적용 시 신속한 신제품 개발과 품질의 우수성으로 고객만족을 꾀할 수 있으며, 시간과 비용을 동시에 줄여 경쟁사와의 경쟁우위를 높이는 해결책이 될 수 있다.-110 마이크로프로세서와 21285 주제어기가 장착된 EBSA-285 보드이다. 측정하면서 수행하였다. 검증 결과 random 상태에서는 문헌자료에 부합되는 예측결과를 보여주었으나, intermediate와 constant 상태에서는 문헌보다 다소 낮은 속도를 보여주었다 이러한 속도차는 추후 현장 데이터를 수집하여 보다 실질적인 검증을 통하여 조정되어야 할 것으로 판단된다.지발광(1.26초)보다 구애발광(1.12초)에서 0.88배 감소하였고, 암컷에서 정지발광(2.99초)보다 구애발광(1.06초)에서 0.35배 감소하였다. 발광양상에서 발광주파수는 수짓의 정지발광에서 0.8 Hz, 수컷 구애발광에서 0.9 Hz, 암컷의 정지발광에서 0.3 Hz, 암컷의 구애발광에서 0.9 Hz로 각각 나타났다. H. papariensis의 발광파장영역은 400 nm에서 700 nm에 이르는 모든 영역에서 확인되었으며 가장 높은 첨두치는 600 nm에 있고 500에서 600 nm 사이의 파장대가 가장 두드러지게 나타났다. 발광양상과 어우러진 교미행동은 Hp system과 같은 결과를 얻었다.하는 방법을 제안한다. 즉 채널 액세스 확률을 각 슬롯에서 예약상태에 있는 음성 단말의 수뿐만 아니라 각 슬롯에서 예약을 하려고 하는 단말의 수에 기초하여 산출하는 방법을 제안하고 이의 성능을 분석하였다. 시뮬레이션에 의해 새로 제안된 채널 허용 확률을 산출하는 방식의 성능을 비교한 결과 기존에 제안된 방법들보다 상당한 성능의 향상을 볼 수 있었다., 인삼이 성장될 때 부분적인 영양상태의 불충분이나 기후 등에 따른 영향을 받을 수 있기 때문에 앞으로 이에 대한 많은 연구가 이루어져야할 것으로 판단된다.

• Clean Technology
• /
• v.24 no.1
• /
• pp.9-14
• /
• 2018

In this study, Material life cycle evaluation was performed to analyze the environmental impact characteristics of TiN-Zr membrane manufacturing process. The software of MLCA was Gabi. Through this, environmental impact assessment was performed for each process. Transition metal nitrides have been researched extensively because of their properties. Among these, TiN has the most attention. TiN is a ceramic materials which possess the good combination of physical and chemical properties, such as high melting point, high hardness, and relatively low specific gravity, high wear resistance and high corrosion resistance. With these properties, TiN plays an important role in functional materials for application in separation hydrogen from fossil fuel. Precursor TiN was synthesized by sol-gel method and zirconium was coated by ball mill method. The metallurgical, physical and thermodynamic characteristics of the membranes were analyzed by using Scanning Electron Microscope (SEM), Energy Dispersive X-ray (EDS), X-ray Diffraction (XRD), Thermo Gravimetry/Differential Thermal Analysis (TG/DTA), Brunauer, Emmett, Teller (BET) and Gas Chromatograph System (GP). As a result of characterization and normalization, environmental impacts were 94% in MAETP (Marine Aquatic Ecotoxicity), 2% FAETP (Freshwater Aquatic Ecotoxicity), 2% HTP (Human Toxicity Potential). TiN fabrication process appears to have a direct or indirect impact on the human body. It is believed that the greatest impact that HTP can have on human is the carcinogenic properties. This shows that electricity use has a great influence on ecosystem impact. TiN-Zr was analyzed in Eco-Indicator '99 (EI99) and CML 2001 methodology.

• Communications of Mathematical Education
• /
• v.22 no.4
• /
• pp.533-543
• /
• 2008

Recently, many advanced countries have used original ICT tools in their educational courses. But Korea didn't have any effective origin ICT tools in our mathematical education, compared with other countries which have developed various tools, for examples, Web-Mathematica and HP Calculator. Although we have the advanced IT environment, the educational environments in mathematics using ICT seems to be not promising. In this paper, we suggest a new mathematics education tools in ICT and the internet environments in Korea, and a teaching and studyingmodel for the teachers, students and classrooms. It is based on the Sage-Math and RPG. Sage-Math which is the software based on the web and RPG(Random Problem Generator) will give a good answer for the future of Korean mathematics ICT education.

• Wind and Structures
• /
• v.16 no.4
• /
• pp.301-322
• /
• 2013

Recent major post-hurricane damage assessments in the United States have reported that the most common damages result from the loss of building roof coverings and subsequent wind driven rain intrusion. In an effort to look further into this problem, this paper presents a full-scale (Wall of Wind --WoW--) investigation of external and underneath wind pressures on roof tiles installed on a low-rise building model with various gable roofs. The optimal dimensions for the low-rise building that was tested with the WOW are 2.74 m (9 ft) long, 2.13 m (7 ft) wide, and 2.13 m (7 ft) high. The building is tested with interchangeable gable roofs at three different slopes (2:12; 5:12 and 7:12). The field tiles of these gable roofs are considered with three different tile profiles namely high (HP), medium (MP), and low profiles (LP) in accordance with Florida practice. For the ridge, two different types namely rounded and three-sided tiles were considered. The effect of weather block on the "underneath" pressure that develops between the tiles and the roof deck was also examined. These tests revealed the following: high pressure coefficients for the ridge tile compared to the field tiles, including those located at the corners; considerably higher pressure on the gable end ridge tiles compared to ridge tiles at the middle of the ridge line; and marginally higher pressure on barrel type tiles compared to the three-sided ridge tiles. The weather blocking of clay tiles, while useful in preventing water intrusion, it doesn't have significant effect on the wind loads of the field tiles. The case with weather blocking produces positive mean underneath pressure on the field tiles on the windward side thus reducing the net pressures on the windward surface of the roof. On the leeward side, reductions in net pressure to a non-significant level were observed due to the opposite direction of the internal and external pressures. The effect of the weather blocking on the external pressure on the ridge tile was negligible.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.62 no.4
• /
• pp.373-381
• /
• 2017

The main objective of this study was to increase the germination percentage of kenaf seeds with less number of times under non-saline and saline conditions. Therefore, the first goal was to assess the response of kenaf seeds to NaCl. The second goal was to evaluate the effects of $KNO_3$ on kenaf seed germination. The germination percentage exhibited a decreasing tendency in germination rate. Plant dry weight was approximately 0.2 g in all treatments at 5 days after germination. As time passed, the electrical conductivity (EC) value of hydro-priming (HP) consistently increased by 8.7 mS/cm at 24 hours of immersion. However, seeds primed with $KNO_3$ showed no difference in EC values even as times passed. Regarding the priming effect, priming in 100 mM $KNO_3$ concentration for 12 hours increased germination up to 85% in $H_20$ solution and in 0 mM $KNO_3$ concentration upto 73.8% under 0.3% NaCl solution, compared to that of Control. Germination synchronization, shoot length, and leaf unfolding of primed seeds were greater than those of the Control. In addition, main root and hair roots appeared more rapidly in the treated seeds and were more abundant compared to that of the Control. The T50 (times to reach 50% of the final germination percentage) of the Control in both $H_20$ and 0.3% NaCl solutions was 18 and 22 hours, respectively. However, when treated $KNO_3$ priming (0 to 100 mM) in $H_20$ and 0.3% NaCl solution, 9 hours was sufficient to reach T50. Primed (hydro-priming and $KNO_3$) seeds had a lower MDG (mean days untill germination; 0.6-0.62) compared to that of the Control (1.13-1.31) in $H_20$ and 0.3% NaCl solutions. Regarding dry weight of plants after priming, an increasing tendency after the priming treatment in the H20 solution was observed. Furthermore, no significant difference in plant dry weight under 0.3% NaCl stress was observed between the Control and primed seeds. Taken together, the results suggest that 50-100 mM $KNO_3$ priming for 24 hours optimize seed germination rate in less number of times of exposure with great vigor. Therefore, it is recommended for kenaf seed invigoration before planting.

• Journal of Microbiology and Biotechnology
• /
• v.16 no.10
• /
• pp.1583-1590
• /
• 2006

T4 endonuclease V (T4 endo V) [EC 3. 1. 25. 1], found in bacteriophage T4, is responsible for excision repair of damaged DNA. The enzyme possesses two activities: a cyclobutane pyrimidine dimer DNA glycosylase (CPD glycosylase) and an apyrimidic/apurinic endonuclease (AP lyase). T4 denV (414 bp cDNA) encoding T4 en do V (138 amino acid) was synthesized and expressed using either an expression vector, pTriEx-4, in E. coli or a baculovirus AcNPV vector, pBacPAK8, in insect cells. The recombinant His-Tag/T4 endo V (rHis-Tag/T4 endo V) protein expressed from bacteria was purified using one-step affinity chromatography with a HiTrap Chelating HP column and used to make rabbit anti-His-Tag/T4 endo V polyclonal antibody for detection of recombinant T4 endo V (rT4 endo V) expressed in insect cells. In the meantime, the recombinant baculovirus was obtained by cotransfection of BacPAK6 viral DNA and pBP/T4 endo V in Spodoptera frugiperda (Sf21) insect cells, and used to infect Sf21 cells to overexpress T4 endo V protein. The level of rT4 endo V protein expressed in Sf21 cells was optimized by varying the virus titers and time course of infection. The optimal expression condition was set as follows; infection of the cells at a MOI of 10 and harvest at 96 h post-infection. Under these conditions, we estimated the amount of rT4 endo V produced in the baculovirus expression vector system to be 125 mg/l. The rT4 endo V was purified to homogeneity by a rapid procedure, consisting of ion-exchange, affinity, and reversed phase chromatographies, based on FPLC. The rT4 endo V positively reacted to an antiserum made against rHis-Tag/T4 endo V and showed a residual nicking activity against CPD-containing DNA caused by UV. This is the first report to have T4 endo V expressed in an insect system to exclude the toxic effect of a bacterial expression system, retaining enzymatic activity.