• KIEAE Journal
• /
• 제4권4호
• /
• pp.35-44
• /
• 2004

In Korea, the apartment buildings have been constructed recently in large quantities to provide housing due to the gravitation of population towards large cities. However, because of this trend toward high-rise apartment, a number of problems are occurred such as the deterioration of comfort in the dwelling environment and the lack of solar access right in apartment buildings. In the building law, the sunshine hour and the minimal separated distance between apartment buildings as regulated as the criteria for the site planning. Most of site planners, however, designed the apartment site only following minimum separated distance. As a result, the problem of sunshine hours lack is caused and legal dispute concerning solar access right is also arisen. The purpose of this study is to improve solar access right regulation and to help site design of apartment planning. Accordingly, we execute empirical analysis based on computer simulation in order to find suitable separated distance between typically designed apartment buildings. First, we estimated sunshine hours according to independent building orientation, height, and length. Second, we calculated sunshine hours in various case of apartment arrangement; parallel type, courtyard type, tower type and etc. with various separated distance.

• 국제초고층학회논문집
• /
• 제6권1호
• /
• pp.33-47
• /
• 2017

This mixed-use Raffles City (RCH) development is located near the Qiantang River in Hangzhou, the capital of Zhejiang province, located southwest of Shanghai, China. The project incorporates retail, offices, housing, and hotel facilities and marks the site of a cultural landscape within the Quianjiang New Town Area. The project is composed of two 250-meter-tall twisting towers with a form of vibrant waves, along with a commercial podium and three stories of basement car parking. It reaches a height of 60 stories, presenting views both to and from the Qiantang River and West Lake areas, with a total floor area of almost 400,000 square meters. A composite moment frame plus concrete core structural system was adopted for the tower structures. Concrete filled steel tubular (CFT) columns together with steel reinforced concrete (SRC) beams form the outer moment frame of the towers' structure. The internal slabs and floor beams are of reinforced concrete. This paper presents the engineering design and construction of this highly complex project. Through comprehensive discussion and careful elaboration, some conclusions are reached, which serve as a reference guide for the design and construction of similar free-form, hybrid, mix-use buildings.

• 한국실내디자인학회:학술대회논문집
• /
• 한국실내디자인학회 2001년도 춘계학술발표대회 논문집
• /
• pp.117-120
• /
• 2001

This study is a preliminary research to develop design principles for environmentally friendly housing. The purposes of study are to investigate the literatures related passive design for summer and theory of ventilation, to analyze the indoor airflow patterns in traditional Korean house during summer, and to propose the design factors for effective passive cooling system. The analysis for airflow patterns was focused on the ‘An bang’and the ‘Dae Chung’in the ‘An Chae’of a traditional house located in Seoul. Field measurements of air temperature and air velocity were carried out at 30 different measuring points with 8 different window-opening conditions. The measurements were taken on the hottest summer days in August 2000. It is concluded that from an environmentally friendly standpoint design factors to control indoor thermal environment by a passive cooling system during the summer are as follows; ceiling structure has thermal performance like a time-lag effect, optimum height and length of eaves which can prevent sunlight and divert airflow toward the sitting level, building arrangement acceptable the prevailing wind, strategic window arrangement which makes cross ventilation possible (especially north-south) at the sitting level, window opening condition which is possible to intersect two cross-ventilation stream at the main living areas, northward windows remaining in shade to create the air pressure difference, and planning building shape like a bracket that has optimum width and depth.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2015년도 춘계 학술논문 발표대회
• /
• pp.181-182
• /
• 2015

The use of non-bearing light weight wall has increased recently due to the increase of high-rise buildings and supply of long-life housing. Light weight wall has advantages such as reducing the self-weight of the building, convenience in installation, and shortening construction period, however, must have a sufficient strength to external force. This study standardized the impact resistance test method for light weight walls by using the actual impact load obtained through load analysis test in previous studies. The impact resistance test method was divided into the test method that uses soft body and the one that uses hard body. The size of specimen was set up as height 2.4m and width 3.0m. The size and shape of the body followed those used in BS 5234-2 and so on for the compatibility with the test method used overseas. The judgment criteria for impact resistance based on test results were not defined uniformly as the assessment of functional damage can vary depending on the type of material, structural method, purpose of wall, and so on even when the same impact load was applied.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2015년도 춘계 학술논문 발표대회
• /
• pp.185-186
• /
• 2015

The use of non-bearing lightweight wall has increased recently due to the increase of high-rise buildings and supply of long-life housing. Lightweight wall has advantages such as reducing the self-weight of the building, convenience in installation, and shortening construction period, however, must have a sufficient strength to external force. This study standardized the stiffness (static horizontal load resistance) test method for lightweight walls by using the actual impact load obtained through the load analysis test conducted in the previous studies. The size of specimen was set up as height 2.4m and width 3.0m. Test apparatus and test methods were referred to BS 5234-2:1992. However, the loading level applied to the specimen was divided into 3 steps (3000N, 1000N, 500N) that can be applied selectively depending on the purpose of the wall. The deformation characteristics according to the same loading level were vary depending on the specimen's type, and the evaluation criteria for functional damage may vary depending on the material, method of construction, and purpose of wall. Therefore, we did not suggest unified evaluation criteria of the stiffness to the test results.

• 한국주거학회:학술대회논문집
• /
• 한국주거학회 2005년도 추계학술대회 논문집
• /
• pp.223-228
• /
• 2005

This study examined and analyzed locational conditions of apartment houses in regional small cities to provide basic materials to set direction and index of view management of apartment house and thus the results of the study are as follows. 1. The number of story of apartment houses 'below five story' was 48% and area of apartment house was 'over 500m$^2$ and below 1000m$^2$' in 31% of the whole regions. 2. As a result of analyzing correlations with changes of floor of apartment house by construction year, apartment houses below 10 story were mainly built between 1991 and 1995 and high-storied apartment houses over 11 story were mainly built since 1995 and apartment houses over 21 story were built since 2000 and these high-storied apartment houses were main cause of hindering view of small cities. Accordingly, establishment of guideline of building high-storied apartment house which can be a primary obstacle of urban view and regulations of height are needed.

• 기본간호학회지
• /
• 제14권1호
• /
• pp.92-102
• /
• 2007

Purpose: This study was conducted to evaluate nutritional status, and the effects of lifestyles and depression on nutritional status of elderly people (NSE). Method: The participants were 280 elders who visited the Y city Senior Welfare Center between August 2006 and October 2006. Data were collected using a structured questionnaire that included general characteristics, lifestyle checklist, depression scale, and nutritional risk index. Also, Body Mass Index (BMI) was calculated from height and weight. T-test, ANOVA, Duncan test, Pearson coefficients correlation and stepwise multiple regression were used to analyze the data using the SPSS Win 12.0 program. Results: The NSE mean score was mid level at 5.03 BMI was 23.42 which indicates overweight. Depression was the factor that influenced the nutritional risk index most strongly, accounting for 17.3% of the total variance in the NSE. A combination of significance of health, concerns about health, housing, condition of teeth, activity, and smoking pattern accounted for 29.8% of the variance in the NSE. Condition of teeth accounted for only 3.8% of the variance in BMI. Conclusion: It is necessary to be aware that variance in the NSE can be affected by several factors including depression and lifestyle and that depression is strongly related to poorer NSE.

• 설비공학논문집
• /
• 제25권9호
• /
• pp.506-515
• /
• 2013

The PFT (PerFluorocarbon Tracergas Technique) is of advantage to field surveys for evaluating the ventilation condition, due to its simplicity and convenience. On the other hand, it requires researchers to make some additional considerations that include uncertainties, such as the substance concentration distribution in indoor air, representativeness of a sampler, deviation of emission sources, and analysis error. In this study, the PFT and $CO_2$ tracer gas methods were applied simultaneously, to evaluate the accuracy of PFT on six ventilation conditions in the three-storied detached house. The air exchange and the outdoor air introduction a between and into zones were measured. As the results, deviations of PFT concentration distributions were observed at a sufficiently low level for an accurate determination for a house where the interior height was large, and there were relatively many partition walls. However, when a uniform airflow appeared in the indoor air, it was also validated that the indoor air would be exhausted without sufficient mixing, and consequently the measurement error of the PFT would be large.

• 감성과학
• /
• 제21권1호
• /
• pp.115-128
• /
• 2018

디자인 과정과 실제 공간을 사용함에 있어 공간감을 이해하는 것이 매우 중요한 역할을 하는데, 동일한 공간이라도 어떻게 디자인하느냐에 따라 공간의 깊이감에 대한 지각이 달라질 수 있다. 공간의 3차원적인 속성인 넓이, 깊이, 높이 중 넓이와 높이감에 대한 이론과 연구들에 비해 깊이감에 대한 이론이나 연구는 상대적으로 적은데 이는 넓이나 높이에 비해 공간의 깊이감이 초래하는 효과에 대한 관심이 부족했던 원인으로 보인다. 본 연구는 Computer Graphic으로 제작한 실내공간을 대상으로 시선추적장치를 이용하여 깊이감에 대한 지각과정을 이해하고자 하였다. 44명의 실내디자인 전공 학생들이 실험에 참가하여 마주보이는 벽면에 깊이감을 자극하는 구성요소를 달리한 3개의 이미지를 보며 가장 깊어보이는 공간을 탐색하였다. 그 결과 3개의 이미지간에 주시시간의 차이가 나타났고, 가장 깊어 보이는 공간에 대한 응답에 따라서도 주의집중에 통계적으로 유의미한 차이가 발견되었다. 본 연구는 깊이감에 영향을 끼치는 요인과 기존 정설에 대한 정량적인 타당성을 제시하고, 이상적인 공간의 깊이감을 얻을 수 있는 디자인 방법 개발 등에 도움이 될 것으로 본다.

• 한국조경학회지
• /
• 제44권2호
• /
• pp.122-129
• /
• 2016

본 연구는 도심 내에서 공원 및 가로수 주변에 식재된 대표적인 세 가지 상록 관목류인 사철나무(Euonymus japonica), 영산홍(Rhododendron indicum), 회양목(Buxus koreana) 등을 중심으로 겨울철 염화칼슘($CaCl_2$) 처리에 따른 생육 및 생리적 반응을 살펴봄으로써, 내염성 정도와 제설제 피해지역에 대한 내성수종을 선별하기 위한 자료로 제시하고자 한다. 염화칼슘을 각각 0%(대조구), 0.5%, 1.0%, 3.0%, 5.0% 처리한 실험구에 2014년 11월에 정식한 후 이듬해 이른 봄인 2015년 3월에 수고, 엽장, 엽폭, 엽형지수, 엽수, 생체중, 건조중, 건물률, R/T율, 엽록소함량, 엽록소형광반응, 광합성률, 기공전도도, 증산율 등의 생육 및 생리적 특성을 조사하였다. 사철나무는 3.0% 이하, 영산홍과 회양목은 1.0% 이하의 처리구에서 생존이 가능하였으며, 사철나무가 영산홍과 회양목에 비해 생육적 감소율이 비교적 낮았다. 염화칼슘 처리농도가 높을수록 대조구에 비해 생리적 반응들이 감소되는 것은 동일하나, 영산홍과 회양목은 감소세가 비교적 뚜렷한 반면, 사철나무가 완만한 감소세를 보이고 있다. 특히, 처리농도가 높아짐에 따라 영산홍은 증산율을, 회양목은 광합성율과 기공전도도를 억제시키는 경향을 보였다. 이러한 결과를 통해 사철나무가 영산홍과 회양목에 비해 염해에 좀 덜 민감한 수종임을 알 수 있어 제설제 피해지역에 상록 관목류로 적용이 가능할 것으로 본다.