• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.48 no.1
• /
• pp.81-88
• /
• 2020

Flight data recorder is a equipment that records data required for investigation of aircraft accidents and should be developed in compliance with the ED-112A standard. Unlike general data storage device, flight data recorder must be able to recover data after an aircraft accident, requiring a housing and a memory board to protect data in extreme environments. To attain this performance, we designed a housing that can withstand the test by analyzing the physical environment of the impact, shear/tensile, penetration resistance and static crush test of the crash survival test and minimized the size and weight compared to the existing one in consideration of the installation of the aircraft in this paper. Insulation material and thermal block material were applied to endure high and low temperature fire so that the internal temperature does not rise above 150℃ even in 260℃, 10 hour environment. In addition, the memory board is designed to minimize the size and we devise a hoping programming method to prevent continuous data loss of more than 16 seconds. Through this, Crash protected memory module that satisfies ED-112A was completed.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.4
• /
• pp.428-437
• /
• 2017

Recently, local government has established a development strategy which takes into account the quality of each area, in order to solve the problems posed by poor development, hindrance of the urban landscape, the limits imposed by relevant laws, etc. However, the number of floors is an important factor which determines the urban landscape, planning density and quality of the external space. This planning factor has a very different effect according to the terrestrial circumstances, number of households, underparking ratio, green space ratio and floor area ratio. Therefore, in this study, a case analysis and case study are conducted and the correlation between each index is clarified. The conclusions of this study are follows. Firstly, flexibility should be ensured by taking into consideration the density indicators, average number of floors, and residential environmental performance measures in related laws and systems. Secondly, it is necessary to develop a wide-area planning method that extends the planning concept from the beginning of planning to neighboring blocks or cities. Thirdly, deregulation measures should be implemented, such as establishing specialized strategies for each region, and regulatory measures for encouraging different types of development.

• Korean Journal of Poultry Science
• /
• v.38 no.4
• /
• pp.305-313
• /
• 2011

This study was conducted to investigate the effects of housing systems on the productivity and physiological response as stress indicators in White Leghorn chickens. The chickens subjected to the conventional cages had a significantly lower viability, hen-housed egg production, egg weight and body weight compared with those to the floor pens. However, the hens housed in the conventional cages had a shorter day of the first egg and a greater egg quality compared with those housed in the floor pens. In addition, this study was also investigated to identify biological markers for assessing the physiological response of chickens under stress conditions. As biological markers, the amount of telomeric DNA was analyzed by quantitative fluorescent in situ hybridization on the nuclei of cells. The DNA damage rate of lymphocytes was also quantified by the comet assay. The amount of telomeric DNA of the lymphocytes, kidney and spleen was significantly higher in the chickens under floor pens than those under conventional cages. The DNA damage also increased in chickens raised under conventional cages, as compared to the chickens under floor pens. As results, we conclude that the chickens housed in conventional cages have a greater stressful status than those housed in floor pens.

• Asian-Australasian Journal of Animal Sciences
• /
• v.28 no.10
• /
• pp.1512-1518
• /
• 2015

This experiment was conducted to assess the welfare and productivity of gestating gilts in groups with the electronic sow feeding (ESF) system compared to conventional stalls. A total of 83 gilts ($Yorkshire{\times}Landrace$) were housed into individual stalls to be artificially inseminated. Gilts confirmed pregnant were introduced to their treatment, conventional stalls (ST) or groups with the ESF system. All gilts were taken to the farrowing crates one week prior to their expected farrowing date. In the gestation period, there were no significant differences between gilts allocated to ST and ESF on growth performance. However, backfat thickness gain (p = 0.08) and body condition score (BCS) at 110 days of gestation (p = 0.10) tended to be higher in ESF gilts than ST. Likewise, gilts housed in group showed significantly higher estimated body muscle contents at 110 days of gestation (p = 0.02) and body muscle change during gestation (p = 0.01). There was a trend for a shorter parturition time in ESF gilts (p = 0.07). In the lactation period, group housed gilts showed a tendency to increased BCS changes (p = 0.06). Reproductive performance did not differ with the exception of piglet mortality (ST = 0.2 no. of piglets vs ESF = 0.4 no. of piglets; p = 0.01). In blood profiles, ST gilts showed a higher cortisol level at 110 days of gestation (p = 0.01). Weaning to estrus interval was shorter in gilts housed in ESF than ST (p = 0.01). In locomotory behaviors, ESF gilts recorded a tendency to elevate locomotion score at 36, 70, and 110 days of gestation (p = 0.07, p = 0.06, and p = 0.06, respectively). Similarly, ESF gilts showed significantly higher incidence of scratches at 36, 70, and 110 days of gestation (p = 0.01). Moreover, farrowing rates were higher in stall treatment (97.6%) compare to group housing treatment (95.2%). In conclusion, while group housed gilts with ESF system positively affected welfare status in combination with less physiologically stressful environments and activity, it negatively effects piglet mortality, farrowing rates and injuries of gilts.

• Journal of the Korean Wood Science and Technology
• /
• v.43 no.3
• /
• pp.364-373
• /
• 2015

This study was carried out to estimate the effects of density and mixing ratio of mandarin peels on the bending performances of the sawdust-mandarin peels particle boards. The board density influenced significantly to the bending performance of boards. Dynamic modulus of elasticity (dMOE) and static modulus of elasticity (sMOE) and modulus of rupture (MOR) of particle boards decreased with an increase in the mixing ratio of mandarin peels at the board densities of $0.4g/cm^3$ and $0.5g/cm^3$. High correlations were found between the dMOE and sMOE, and dMOE and MOR of particle boards prepared. Therefore, it was concluded that the dMOE obtained by free vibration test using resonance frequency could be used for predicting the sMOE and MOR of sawdust-mandarin peels particle boards.

• Journal of the Korean Geotechnical Society
• /
• v.29 no.8
• /
• pp.37-51
• /
• 2013

An energy pile encases heat exchange pipes to exchange thermal energy with the surrounding ground formation by circulating working fluid through the pipes. An energy pile has many advantages in terms of economic feasibility and constructability over conventional Ground Heat Exchangers (GHEXs). In this paper, a coil-type PHC energy pile was constructed in a test bed and its thermal performance was experimentally and numerically evaluated to make a preliminary design. An in-situ thermal response test (TRT) was performed on the coil-type PHC energy pile and its results were compared with the solid cylinder source model presented by Man et al. (2010). In addition, a CFD numerical analysis using FLUNET was carried out to back-analyze the thermal conductivity of the ground formation from the Ttype PHC energy RT result. To study effects of a coil pitch of the coil-type heat exchange pipe, a thermal interference between the heat exchange pipes in PHC energy piles was parametrically studied by performing the CFD numerical analysis, then the effect of the coil pitch on thermal performance and efficiency of heat exchange were evaluated. Finally, an equivalent heat exchange efficiency factor for the coil-type PHC energy pile in comparison with a common multiple U-type PHC energy pile was obtained to facilitate a preliminary design method for the coil-type PHC energy pile by adopting the PILESIM2 program.

• Korean Journal of Occupational Health Nursing
• /
• v.9 no.2
• /
• pp.94-109
• /
• 2000

The chances of disease pattern increased the importance of Health-promoting Lifestyle and a large part of the Health-promoting Lifestyle is associated with individual's habit. Health-promoting Lifestyle among nurses is very important because nurses could be a role model of patients and possibly influence many patients. The purpose of this study was oat on1y to assess how hospital nurses practice their Health-promoting Lifestyle but also to identify those affecting determinants. The subjects were 392 nurses working at 3 different hospital in Seoul. These data were collected by self administered questionnaire from April 27 to May 20, 2000. This study examined Health-promoting Lifestyle using In Sook Park's model, individual characteristics. Behavior-specific Cognitions and Affect factors using Pender's model and tried to fine out their relationships. The instruments used in this study were Health-promoting Lifestyle Profile developed by In Sock Park(1995). Likert's four-point scale was used also in this research. The percentage, mean standard deviation, AVNOVA, Pearson's correlation coefficient and multiple regression in the SAS package were used to analyze the data. The results of this study were as follows; 1. 52.3% of sample were aged between 25 and 29, 67.1% were single, 55.6% were university graduates, 51.8% earned 1.5 to 2.0 million won, 57.9% slept for d to 8 hours, 74.5% stated they were healthy. 2. 32.7% of sample worked in surgical gird department, 82.4% worked in 3 shift, 26.3% have been working as nurses for 5 to 7 years. Average score of Perceived self-efficacy was 3.63, Perceived benefits of action was 3.25, Social support was 2.75, and Perceived barriers to action was 1.87 which was the lowest score. 3. The average score if the performance in Health-promoting Lifestyle variable was 2.45 which was lower than previous study. The sanitary life Was 3.18 which was the highest score, harmonious relationship 3.13, emotional support 2.90. The variable with the highest degree of performance was the sanitary life, whereas the one with the west degree was the health diet. 4. There were no significant difference in perceived benefits of action with individual's a character, but in Perceived bait his of action there were significant differences with age(p<.01), marital status(p<.05), housing(p<.05), and Perceived health status(p<.05). In Perceived self-efficacy, there were significant differences with educational level(p<05), sleeping hours(p<.05), and BMI(p<.05). In Social support here were significant difference with housing and sleeping hours.

• Land and Housing Review
• /
• v.2 no.1
• /
• pp.61-68
• /
• 2011

In order to clarify the structural performances of Welded Deformed Steel Bar Mats (WDSBM), the research stated includes the tests for standard hook of top bars of slab in concrete slab-wall joints, the tests for embedment length of top bar of slab, and the development strength tests for standard hook. The test results are as follows; (1) For slab-wall joints using WDSBM as reinforcement in slab, if the top bars of WDSBM are spliced by ordinary bars with sufficient development length and size, it is enough for the strength and crack control. (2) When WDSBM of slab is spliced in joint, the strength is increased with the embedment of bars of this WDSBM into wall. Beyond peak strength, however, ductility is diminished to that as no splice due to pull-out failure. (3) For slab-wall system, ultimate strain of concrete for flexural compression zone in lower surface of slab seems much greater than that of normal concrete beam. The reason is that normal concrete beam has the joint with $180^{\circ}$, however slab-wall joint has the $90^{\circ}$ of which concrete can be confined.

• Land and Housing Review
• /
• v.3 no.3
• /
• pp.299-305
• /
• 2012

Various types of bio wood chip for fermentation-extinction of food waste was investigated by comparing their different pore structure with the performance of weight loss rate and microbial activity. The fermentation-extinction of food waste with bio wood chip was examined by adding 700~1,500g of food waste every day during 15 days to the fermentation-extinction reactor with condition of $30{\sim}50^{\circ}C$ temperature and 30~70% humidity, where 1,500g of bio wood chips were existed. The bio wood chips used in this experiment were categorized into 4 different types; microbial-mixing type(A biochip), macro pore type(B biochip) under $2{\mu}m$ of pore size, micro pore type of wood-chips(C biochip) under $0.1{\mu}m$ of pore size, viscous & sticky type(D biochip). As a result, A, B, C, D bio wood chip exhibited 85%, 63%, 92%, 73% weight loss of food waste with fermentation-extinction. The maximum weight loss of food waste was obtained at the fermentation-extinction experiments by using C bio wood chip. On the other hands, the maximum ratio of ATP to COD and TN was obtained from $3.00{\times}10^{-10}$ and $2.31{\times}10^{-11}$ in the case of C bio wood chip, comparing with other types of bio wood chip. Consequently, the performance of weight loss rate was affected with the micro pore structure of bio wood chip which have an advantage of extensive microbial activity space in the fermentation-extinction of food waste.

• Land and Housing Review
• /
• v.10 no.3
• /
• pp.23-32
• /
• 2019

Vacuum Insulation Panel(VIP) has the lowest thermal conductivity among present insulations. It is composed of envelope, core material and getter. Aluminum film is usually used as the envelope of VIP, and it is important component to decide the useful life of VIP. In this research, the thermophysical properties of incombustible fiber glass core VIP were investigated with the possibility of its architectural applications. The results of this research can be summarized as follows: 1) The thermal conductivity of 20mm-thick fiber glass core VIP is resulted as 0.00177W/m·K, which means that 20mm-thick VIP can meet all the reinforced insulation guideline and it can be used in any envelope of any region in Korea. 2) As a result of the test of incombustion and gas toxicity, fiber glass core VIP was suitable for incombustible material. 3) As the test result for the long term thermal conductivity, fiber glass core VIP was found out that it would keep above 10 times insulating performance than polystyrene foam and glass fiber. 4) To meet the thermal transmittance of 0.12W/㎡K, limited-combustible insulation of expanded polystyrene foam and phenolic foam should be used respectively as thick as above 280mm and 170mm, incombustible VIP can meet the same insulation level with 20mm thickness. 5) The price competitiveness of incombustible VIP to meet the thermal transmittance of 0.12W/㎡·K was about 1,500won/㎡ higher than that of phenolic foam.