• Ceramist
• /
• v.22 no.3
• /
• pp.281-300
• /
• 2019

Surface enhanced Raman scattering (SERS) was first discovered in 1974 by an unexpected Raman signal increase from Pyridine adsorbed on rough Ag electrode surfaces by the M. Fleishmann group. M. Moskovits group suggested that this phenomenon could be caused by surface plasmon resonance (SPR), which is a collective oscillation of free electrons at the surface of metal nanostructures by an external light source. After about 40 years, the SERS study has attracted great attention as a biomolecule analysis technology, and more than 2500 new papers and 500 review papers related to SERS topic have been published each year in recently. The advantages of biomaterials analysis using SERS are as follows; ① Molecular level analysis is possible based on unique fingerprint information of biomolecule, ② There is no photo-bleaching effect of the Raman reporters, allowing long-term monitoring of biomaterials compared to fluorescence microscopy, ③ SERS peak bandwidth is approximately 10 to 100 times narrower than fluorescence emission from organic phosphor or quantum dot, resulting in higher analysis accuracy, ④ Single excitation wavelength allows analysis of various biomaterials, ⑤ By utilizing near-infrared (NIR) SERS-activated nanostructures and NIR excitation lasers, auto-fluorescence noise in the visible wavelength range can be avoided from in vivo experiment and light damage in living cells can be minimized compared to visible lasers, ⑥ The weak Raman signal of the water molecule makes it easy to analyze biomaterials in aqueous solutions. For this reason, SERS is attracting attention as a next-generation non-invasive medical diagnostic device as well as substance analysis. In this review, the principles of SERS and various biomaterial analysis principles using SERS analysis will be introduced through recent research papers.

• Asian Pacific Journal of Cancer Prevention
• /
• v.16 no.17
• /
• pp.7513-7516
• /
• 2015

Background: Pyogenic granuloma is a common non-neoplastic connective tissue proliferation. ICAM-1 and VCAM-1 are vascular adhesion molecules and CD34 is a marker for evaluation of angiogenesis. The purpose of this study was to compare the immunohistochemical expression of ICAM-1, VCAM-1 & CD34 in oral pyogenic granuloma and normal gingiva. Materials and Methods: This study was performed on thirty five formalin-fixed, paraffin embedded samples of gingival pyogenic granuloma. Also we used thirty five paraffined blocks of normal gingiva as control group which were taken from crown lengthening surgery. We employed immunohistochemistry staining for our prepared microscopic slides using monoclonal mouse anti-human antibodies against ICAM-1 (CD54), VCAM-1 (CD106) and CD34. Slides were examined under light microscope and then the mean amount of stained vessels also known as microvascular density (MVD) in highly vascularized areas (hot spots) was measured. Paired t-test and repeated measures ANOVA were used to compare the difference between quantitative variables and Chi-square test for qualitative variables in different groups. Pearson correlation coefficient was used to compare relations between quantitative variables. P<0.05 was considered significant. Results: The mean of MVD for ICAM-1, VCAM-1 and CD34 was significantly higher in pyogenic granuloma than normal gingiva (p<0.001 & p<0.001 & p<0.001, respectively). Expression of CD34 in pyogenic granuloma was significantly higher than ICAM-1 and VCAM-1 (P<0.001). Besides, expression of ICAM-1 in normal gingiva, was significantly lower than two other markers (p<0.001). Conclusions: Regarding the results, it seems that ICAM-1, VCAM-1 and CD34 are useful biomarkers in evaluation of vascular and inflammatory lesions such as gingival pyogenic granuloma and the results indicate the role of these biomarkers in pathogenesis of oral pyogenic granuloma.

• Journal of the Korean Solar Energy Society
• /
• v.29 no.5
• /
• pp.45-52
• /
• 2009

Fossil power plants firing lower grade coals or equipped with modified system for $NO_x$ controls are challenged with maintaining good combustion conditions while maximizing generation and minimizing emissions. In many cases significant derate, availability losses and increase in unburned carbon levels can be attributed to poor combustion conditions as a result of poorly controlled local fuel and air distribution within the boiler furnace. In order to develop a on-line combustion tuning system, field test was conducted at operating power boiler. During the field test the exhaust gases' $O_2,\;NO_x$ and CO was monitored by using a spatially distributed monitoring grid located in the boiler's high temperature vestibule and upper convective rear pass region. At these locations, the flue gas flow is still significantly stratified, and air in-leakage is minimal which enables tracing of poor combustion zones to specific burners and over-fire air ports. using these monitored information we can improving combustion at every point within the furnace, therefore the boiler can operate at reduced excess $O_2$ and gas temperature deviation, reduced furnace exit gas temperature levels while also reducing localized hot spots, corrosive gas conditions, slag or clinker formation and UBC. Benefits include improving efficiency, reducing $NO_x$ emissions, increasing output and maximizing availability. Discussion concerning the reduction of greenhouse gases is prevalent in the world. When taking a practical approach to addressing this problem, the best way and short-term solution to reduce greenhouse gases on coal-fired power plants is to improve efficiency. From this point of view the real time optimized combustion tuning approach is the most effective and implemented with minimal cost.

• Journal of Korean Society of Transportation
• /
• v.33 no.1
• /
• pp.81-89
• /
• 2015

Crashes that occur at tollgates have different characteristics compared to those of the mainline on expressways in terms of crash cause, crash type, and vehicle type. Due to this fact, the safety performance function (SPF) focused on the expressway tollgates, apart from the mainline, should be developed. The aim of this study is, therefore, to identify the influential factors and develope a SPF for crashes at tollgates. Firstly, we established independent variables affecting crashes at tollgates through literature review and descriptive statistical analysis. Based on these variables, two negative binomial regression models with different form of independent variables were developed and goodness-of-fits of each model were compared. According to the results, the number of crashes increases i) as AADT, Hi-pass rate, and heavy vehicle rate increase, ii) as average lane width decreases, iii) on the mainline tollgate type. The safety performance function developed in this study could be applied to select hot-spots for expressway tollgates.

• Asian Pacific Journal of Cancer Prevention
• /
• v.13 no.7
• /
• pp.3219-3222
• /
• 2012

A comparative study between 17 Japanese and 19 Indian patients with oral squamous cell carcinomas (OSCCs) revealed that the tumour prognostic indicator mean vessel density (MVD) count for angiogenesis was relatively high at 57.1 in Indian as compared to 39.3 in Japanese (P=0.001) cases, whereas the lymph-vessel density (LVD) count for lymphangiogenesis was lower (12.8 vs 48.0, P=0.002). Both male and female Indians had higher MVD counts, but LVD counts were only slightly lower in females. MVD count was relatively high among the cases below 65 years old in both the countries (P=0.4). Japanese cases with Tongue cancer had higher MVD count, but the Indian cases had lower LVD counts. Size-wise, T2 and T3 had higher counts of MVD both in Indian and Japanese cases. MVD and LVD count was higher in grades II and III both in Japanese and Indian cases. There was insignificant difference of the MVD counts among smokers, but the tobacco chewers in Indian cases had higher counts of MVD and LVD (P value by Bartlett test 0.35, 0.57 respectively). The hot-spots of tumour sites had variable rates of lymphocyte infiltration showed higher MVD counts in all the cases. Although the clinical characteristics and demographic variables usually relate to MVD and LVD counts, the tendency of higher values, especially among tobacco chewers, identified as the highest risk group for occurrence of oral cancer needs to be investigated further.

• Composites Research
• /
• v.31 no.4
• /
• pp.145-150
• /
• 2018

Various structural health monitoring (SHM) systems have been suggested for aerospace industry in order to increase its life-cycle and economic efficiency. In the case of aircraft structure madden with metal, a major concern was hot spots, such as notches, bolts holes, and where corrosion or stress concentration occurs due to moisture or salinity. However, with the increasing use of composites in the aerospace industry, further advanced SHM systems have been being required to be applied to composite structures, which have much complex damage mechanism. In this paper, a method of acoustic emission localization for composite structures using Q-switched laser and multiple Amplifier-integrated PZTs have been proposed. The presented technique aims at localization of the AE with an error in distance of less than 10 mm. Acoustic emission simulation and the localization attempt were conducted in the composite structure to validate the suggested method. Localization results, which are coordinates of detected regions, grid plots and color intensity map have been presented together to show reliability of the method.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.26 no.1
• /
• pp.32-36
• /
• 1997

As a fundamental research for the development of pumpkin products, the changes of carotenoids were investigated in hot air dried pumpkin powder packed in PE/nylon film during storage at 2$0^{\circ}C$ under the dark and bright conditions. Total amounts of carotenoids in the dehydrated pumpkin powder were reduced by 65~70 percentage without effect of light after one month. The carotenoids of pumpkin powder were separated to five spots without effect of light by TLC, but difference of color was not significant throughout the storage period. By the analysis of HPLC, leutin, under bright condition, was increased from 15 days of storage but under dark condition it was not changed for one month. Meanwhile, p-carotene, under bright condition, was decreased from 15 days of storage but under drak condition it was decreased from 25 days. The contents of lycopene and $\alpha$ -carotene did not show any significant change throughout the storage period. In color analysis, yellowness value was de- creased in bright as well as dark condition from 10 day storage.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.11 no.4
• /
• pp.122-138
• /
• 2008

A pixel-based approach to urban quality of life assessment can be regarded as a spatial decision problem under the condition of complexity because it searches the urban space for evidence of hot spots of quality of life based on multiple and differentially weighted evaluation criteria. Such an assessment involves inappropriate scaling of several incommensurate criteria, much unstructured subjectivity in the decision maker's judgment, and the large data handling in a raster GIS environment. There is a need for identifying alternative approaches to tackle the ill-structured problem in urban quality of life assessment. In this context, this research proposes and implements a spatial multicriteria analysis approach to evaluate urban quality of life in a raster GIS environment. The implementation of this methodology is illustrated with a case study of the Atlanta metropolitan area. Results indicate that the proposed methodology may provide an alternative approach for evaluating the quality of life in an urban environment.

• Progress in Superconductivity
• /
• v.3 no.2
• /
• pp.241-246
• /
• 2002

We have performed the current and voltage loading tests of resistive superconducting fault current limiters (SFCLS) based on $YBa_2$$Cu_3$$O_{7}$(YBCO) films with the diameter of 2 inch. The SFCL consists of meander-type YBCO stripes covered with 200 nm Au layer grown in situ for current shunt and heat dispersion at hot spots. The minimum quench current of an SFCL unit was about 25 Apeak. Seven SFCL units were connected in parallel fur the current load ing tests at power source of 100 $V_{rms}$ $/2,000A_{rms}$. This SFCL units had maximum limiting current of 170 Apeak during the fault instant and then successfully controlled the fault current below 100 Apeak within 1~2 msec after short circuit. Increased short current also reduced the quench completion time with little change of current limiting characterization. We connected six SFCL units in series fur the voltage loading tests at power source of $1,200 V_{rms}$/170 $A_{rms}$ at this time. The shunt resistors were inserted into each SFCL unit to eliminate power imbalance originated from serial connection of SFCL units. Each SFCL unit was quenched simultaneously during the fault condition. The current increased up to 40 $A_{peak}$ and decreased to 14 $A_{peak}$ after 3 cycles. Quench was completed within 1 msec after the fault. We confirmed operating characteristics of 140 kVA($120 A_{rms}$ $\times$ 1,200 $V_{rms}$) SFCL and presented the manufacturing possibility of 3.3 kV SFCL using 4 inch YBCO films.BCO films.lms.

• Journal of the Korean Wood Science and Technology
• /
• v.24 no.2
• /
• pp.46-54
• /
• 1996

This study was carried out to investigate the vacuum drying characteristics of 50mm- and 75mm- thick tree disks of some domestic softwoods for substituting the conventional hardwoods as the materials for wood crafts. Though the elapsed drying times from green to in-use moisture content(MC) were largely shortened by vacuum drying, the tree disks treated by EWS couldn't be dried to in-use MC, and so sapwood stains also were occurred severely. We suggest EWS treatment is undesirable for the species with very high sapwood portion or vacuum drying with hot water circulation heating system. Heart checks were slight, but sapwood checks, which have never been trouble in drying process of tree disks, were severe. For the reasonable explanation it is suggested MC differences between sapwood and heartwood were large and most of tree disks had already no barks before drying test. Ginkgo was vacuum-dried with very slight drying defects such as heart checks, sapwood checks. V-cracks and sapwood stains. In Korean red pine and pitch pine V-cracks were severely occurred. And it was found the special feature that most of these defected tree disks contained several V-cracks within one tree disk. It can be considered as the causes that the region of sapwood was defected by the several checks at the early drying stage because of the steep MC gradient along the radial direction, and then at the later drying stage the drying stresses due to differential shrinkage were concentrated on these brittle spots.