• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.6
• /
• pp.459-463
• /
• 2017

Hot dip galvanizing in the steel plant is one of the most widely used methods for preventing the corrosion of steel materials including structures, steel sheets, and materials for industrial facilities. While hot dip galvanizing has the advantage of stability and economic feasibility, it has difficulty in repairing equipment and maintaining the facilities due to high-temperature oxidation caused by Zn Fume where molten zinc used in the open spaces. Currently, SM45C (carbon steel plate for mechanical structure, KS standard) is used for the equipment. If a part of the equipment is resistant to high temperature and Zn fume, it is expected to improve equipment life and performance. In this study, the manufactured Ni alloy was tested for its corrosion resistance against Zn fume when it was used in the hot dip galvanizing equipment in the steel plant. Two kinds of materials currently used in the equipment, new Ni alloy and Inconel(typical corrosion-resistant Ni alloy), were selected as the reference groups. Two kinds of molten metal were used to confirm the corrosion of each alloy according to the molten metal. Zn fume was generated by bubbling Ar gas from molten Zn in a furnace($500{\sim}700^{\circ}C$) and the samples were analyzed after 30 days. After 30 days, the specimens were taken out, the oxide layer on the surface was confirmed with an optical microscope and SEM, and the corrosion was confirmed using a potentiodynamic polarization test. Corrosion depends on the type of molten metal.

• Biomedical Science Letters
• /
• v.14 no.2
• /
• pp.97-103
• /
• 2008

This study was conducted to investigate the effect of an anti-inflammatory and analgesic action of the glucosamine HCl (Glucosamine) and SH-1 (Glucosamine + Oriental herbal composition combined group). Male sprague-Dawley rats $(200{\sim}250g)$ and ICR mice $(20{\sim}30g)$ were randomized and these experimental groups were divided into 4 groups. Two control group were given as negative control (saline) and positive control (Ibuprofen, 100 mg/kg) and two groups given as oral administration of Glucosamine (320 m/kg) and SH-1. Carrageenan induced paw edema test, hot plate method, croton oil induced granuloma, capillary permeability test and acetic acid writhing syndrome were also shown to be comparable in the SH-1 group to anti-inflammatory drug group such as positive control group (Ibuprofen). Although further studies should be performed to confirm the effects of SH-1, present results suggest that the combined administration of SH-1 have potential action in anti-inflammatory and analgesic action. It could be applicable for the improvement of arthritic symptoms as a new diet-supplement.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.37 no.6
• /
• pp.614-618
• /
• 2024

MBB (multi-busbar) technology is a module technology to achieve high power, and the use of a number of thin circular metal wires increases light-receiving capacity and reduces resistance. In the process of interconnection using a wire, the stress of the cell increases depending on the degree of coupling between the wire and the cell and the degree of damage caused by heat, or the mobility of current decreases due to poor bonding. The degree of such loss is affected by IR lamp, hot plate temperature and wire thickness. In addition, the values of contact resistance were compared and analyzed to analyze the cause of the decrease in electrical characteristics. In this study, process condition optimization was carried out through peeling test, SEM analysis, EL test, and pre/post bonding efficiency characteristic analysis of the bonded cell according to process conditions, compared the contact resistance.

• KSBB Journal
• /
• v.15 no.4
• /
• pp.331-336
• /
• 2000

The antimutagenic activity of the extract of Artemisia capillaris THUNB on the mutagenicity induced by benzo(a)pyrene [B(a)P] in the presense of S9 mixture was studied using bacterial mutagenic assay system. Samples harvested in summer and autumn were extracted using ethanol and hot water. Among these extracts the water extract of summer sample had the strongest inhibitory effect against the mutagenenicity of B(a)P, The water extract of Artemisia capillaris THUNB was separated again into ethanol soluble and insoluble parts. The ethanol insoluble part(El) of water extract exhibited higher inhibition effects than the ethanol soluble part against the mutagenic activity of B(a)P. El showed dose-dependent activity on the mutagenicity of B(a)P in SOS Chromotest and Ames test. The 50% inbibition concentraction $(IC_{50}$ of El were $200{\mu}g/assay$ $600{\mu}g/plate$ and $800{\mu}b/plate$ in E. coil PQ37 S. typhimurium TA100 and TA98 respectively. El were showed desmutagenic effect but had no effect on the DNA repair system for B(a)P-induced mutagenesis. HPLC analysis showed that the formation of aflatoxin M1 by cytochrome P-450 1A1 known as playing an impotant role on B(a) P-induced mutagenicity was highly inhibited by El. Therefore we encluded that B(a)P-induced mutagencity can be reduced possible due to the interference of el with cytochrome P-450 1A1-dependent bioactivation.

• Culinary science and hospitality research
• /
• v.19 no.3
• /
• pp.73-86
• /
• 2013

This study produced hot-air-dried perilla leaf to add Korea's popular perilla leaf to fresh noodles to examine their value as food and get the best fresh noodle recipe by adding 0%, 3%. 6%, 9%, and 12% of perilla leaf to flour. The moisture content of the dough was highest at 34.41% for the control group with 0% perilla leaf, whereas the pH was lowest at 5.59 for the dough with 12% perilla leaf. As a result of WRC analysis of the dough, moisture absorption increased with greater perilla leaf content. The moisture content of fresh noodles was lowest for the control group with 0% perilla leaf, whereas the pH was highest for the control group. The L, a, and b values of the dough were highest for the group with 0% perilla leaf powder. Hardness and cohesiveness were lowest for the 0% group and springiness tended to decrease with increased amounts of hot air-dried perilla leaf. The number of microorganisms decreased significantly with greater perilla leaf content on the third and fourth days. As a result of the sensory test, the 6% dough showed the highest scores for all items including appearance, flavor, color, taste, and texture. Overall acceptability was also highest at 7.20 for the 6% dough and lowest at 3.27 for the 12% dough. Based on the above results, when producing fresh noodles by adding hot-air-dried perilla leaf powder, inhibition of microorganisms improved with greater perilla leaf content for longer storage, but the sensory properties were best when 6% perilla leaf content was added.

• Korean Journal of Veterinary Service
• /
• v.34 no.2
• /
• pp.159-166
• /
• 2011

This study was carried out to develope enzyme-linked immunosorbent assay (ELISA) for detection of canine brucellosis in dogs experimentally inoculated with Brucella abortus 1119-3 and B. canis RM666. Groups A, B and C of dogs (each group consisting of three dogs) were orally inoculated with approximately $5{\times}10^9$ colony-forming units of B. abortus and B. canis, and with sterile pyrogen-free PBS, respectively. The animals were monitored at regular intervals upto the 12th week post inoculation (PI) by standard tube agglutination test (STAT), plate agglutination test (PAT), Rose Bengal test (RBT), 2-mercaptoethanol rapid slide agglutination test (2ME-RSAT) and ELISA. The induced antibody titers in group A dogs were detected from the first week PI to the eighth week PI in STAT, PAT and RBT using the inactivated whole cells of B. abortus 1119-3 as antigens, while no sera in groups B and C dogs reacted with the antigens. In 2ME-RSAT using whole cells of B. canis M-strain as antigens, the induced antibody titers in group B dogs were observed at the second week PI and persisted for the 12th week PI, while sera of groups A and C dogs did not react with the whole cells. In ELISA using cytoplasmic fractions antigen of B. abortus 1119-3, the mean optical density of antibodies in groups A and B was detected from the first and second weeks PI, respectively, and persisted for 12th week PI, while sera of group C did not cross-react with the fractions antigen. However, in ELISA using the hot saline extracts of B. canis M- as an antigen, the induced antibody titers in only group B dogs were detected from second week PI and persisted for until the end of this study. These results indicate that the ELISA using B. abortus 1119-3 cytoplasmic fractions as antigens can be a good candidate for detection of brucellosis by B. abortus as well as B. canis in dogs.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• v.y2005m4
• /
• pp.305-308
• /
• 2005

This paper presents a fabrication of a full-stale combustion chamber of a liquid rocket engine for a ground hot firing test. Engine drawings for manufacturing were prepared after conceptual and detail designs. The combustor is composed of a head and a chamber. SUS316L is used for materials of the head because of the good quality in low temperature. Inner materials of the ablative cooling chamber is silica/phenolic and outer case materials is the SUS316L. Materials of the regenerative cooling chamber are C18200 and SUS316L. After lathe, general milling and MCT machinings, components were finished by electrolytic polishing. A brazing method was applied for bonding the injectors and the injector plate, the regenerative cooling chamber because of structure configurations.

• Advances in Traditional Medicine
• /
• v.8 no.3
• /
• pp.243-251
• /
• 2008

The effect of alcoholic extracts of Costus specious (Family: Zingiberaceae) was evaluated in experimental models of pain and inflammation. Oral administration of 100, 200 and 300 mg/kg of C. specious extracts were used for the above study. Crude extracts of C. specious (300 mg/kg dose) showed maximum time needed for the response against thermal stimuli ($7.242\;{\pm}\;0.532\;s$) which is comparable to diclofenac sodium ($8.471\;{\pm}\;0.25\;s$) in the hot plate test. The MPH (Maximum Possible Analgesia) has been found to be 14.285 for 300 mg/kg dose of the crude extract while the MPH for diclofenac was 15.857 after 60 min of administration in the hot tail-flick method. The crude extract at 300 and 200 mg/kg doses showed significant reduction in acetic acid induced writhings in mice with a maximum effect of 59.661% reduction at 300 mg/kg dose which is comparable to standard diclofenac sodium (73.4%). Alcoholic extract of C. specious showed significant inhibition in serotonin and egg albumin induced hind paw oedema in rats at 100, 200 and 300 mg/kg of the crude extracts respectively (Serotonin induced edema 44.22; 53.75; 58.51%; egg albumin induced edema - 41.317; 53.892; 59.880% inhibition after 4 h respectively). The antiinflammatory effects showed by the extract were comparable to that of standard indomethacin 5 mg/kg (Serotonin induced edema 77.56%; egg albumin induced edema 77.844% inhibition after 4 h). These results suggest that the extract possesses both the anti-inflammatory and analgesic activity on mice and rat model.

• Proceedings of the KSME Conference
• /
• 2001.11b
• /
• pp.341-346
• /
• 2001

The gun-type gas burner adopted in this study is generally composed of some slits and swirl vanes. Therefore, this paper is studied to investigate the effect of slits and swirl vanes on the turbulent flow fields in the horizontal plane of gas swirl burner with a cone type baffle plate measured by using X-probe from hot-wire anemometer system. This experiment is carried out at flow rate $450\;{\ell}/min$, which is equivalent to the combustion air flow rate necessary for heat release 15,000 kcal/hr in gas furnace, in the test section of subsonic wind tunnel. When the burner has only swirl vanes, the axial mean velocity component shows the characteristic that spreads more remarkably toward radial direction than axial one, but when it has only slits, that is developed spreading more toward axial direction than radial one. Therefore, because the biggest speed is spurted in slits and it derive main flow toward axial direction encircling rotational flow that comes out from swirl vane that is situated on the inside of slits, both slits and swirl vanes composing of cone type gas burner act role that decreases the speed near slits and increases the flow speed in the central part of a burner. Moreover, because rotational flow by swirl vanes and fast jet flow by slits increase turbulent intensities effectively coexisting, the turbulent kinetic energy is distributed with a bigger size fairly near slits than burner models which have only slit or swirl vanes within X/R<0.6410.

• Journal of Power System Engineering
• /
• v.5 no.2
• /
• pp.22-29
• /
• 2001

This paper represents axial mean velocity, turbulent kinetic energy and swirl number based on momentum flux measured in the X-Y plane and Y-Z plane respectively of a cone type gas swirl burner by using X-probe from the hot-wire anemometer system. This experiment is carried out at flow rates 350 and $450{\ell}/min$ respectively, which are equivalent to the combustion air flow rate necessary for heat release 15,000 kcal/hr in gas furnace, in the test section of a subsonic wind tunnel. Axial mean velocities and turbulent kinetic energies show that their maximum values exist centering around narrow slits situated radially on the edge of and in the forefront of a burner until $X/R{\fallingdotseq}1.5$, but they have a peculiar shape like a starfish diffusing and developing into inward and outward of a burner by means of the mixing between flows ejected from narrow slits, an inclination baffle plate and swirl vanes respectively according to downstream regions. Moreover, they show a relatively large value in the inner region of 0.5$S_m$ obtained by integration of velocity profiles shows a characteristic that has an inflection point composing of the maximum and minimum value until X/R<3, but shows close agreement with the geometric swirl number after a distance of X/R=3.