• Steel and Composite Structures
• /
• v.49 no.2
• /
• pp.181-196
• /
• 2023

Marine structures including offshore wind turbines (OWTs) always work under cyclic loads, which arouses much attention on the fatigue design. The tripod substructure is one of the typical foundation forms for fixed OWTs. The three-planar tubular Y-joint (3Y joint) is one of the important components in fatigue design as it is most likely to have cracks. With the existence of the multiplanar interaction effect, calculating the hot spot stress (HSS) of 3Y joints is complicated. To assist with fatigue design, the distributions of stress concentration factor (SCF) and multiplanar interaction factor (MIF) along weld toe curves induced by the out-of-plane bending moment are explored in this study. An FE analysis method was first developed and verified against experimental results. This method was applied to build a numerical database including 1920 FE models covering common ranges of geometric parameters. A parametric study has been carried out to reveal the distribution patterns of SCF and MIF. After multidimensional nonlinear fittings, SCF and MIF distribution formulas have been proposed. Accuracy and reliability checking prove that the proposed formulas are suitable for calculating the HSS of 3Y joints.

• Journal of Satellite, Information and Communications
• /
• v.10 no.1
• /
• pp.6-11
• /
• 2015

In this paper, we analyzed current states and spatial characteristics of crime occurring in A city of Colombia using big data of crime. The analysis draws on the crime statistics of Colombia National Police Agency from 2013 January to September. We also investigated spatial autocorrelation of crime using global and local Moran's Index. Spatial autocorrelation analysis shows significant spatial autocorrelation in the high frequency of crime. Global Moran's I analysis indicates that there are statistically significant value of crime area. Using local Moran's Index analysis, we also implement Local Indicators of Spatial Association(LISA) map and hot spot analysis helps us identify crime distribution.

• Nuclear Engineering and Technology
• /
• v.17 no.4
• /
• pp.256-266
• /
• 1985

The loss of coolant flow accident is analyzed for the pressurized water reactor of Korea Nuclear Unit-1. The loss of coolant flow accident is classified into three types in accordance with its severity; partial loss of coolant flow, complete loss of coolant flow and pump locked rotor accident. Analysis has been carried out in three stages; system transient and average core analysis, DNBR calculation and hot spot analysis. The purpose of developing KTRAN is to simulate the transient fast. For the DNBR calculation, the thermal hydraulic codes, SCAN and COBRA IV-1, are adopted. And for the hot spot analysis, the fuel thermal transient code LTRAN is employed. This code system should be fast responding to the transient analysis. In case the transient occurs, severity comes within a couple of seconds. So response should be fast to accomodate the following sequence of the accident. Unfortunately this purpose could not be achieved by KTRAN. However, the calculated results are well comparable with FSAR results in range. Thereby, the effectiveness of KTRAN code analysis in this type of accident is proven.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.21 no.3
• /
• pp.93-103
• /
• 2018

The purpose of this study is to analyze the spatial cluster characteristics of fire using long-term fire data. For this, fire data which were broke out in the last 40 years were converted into GIS data and spatial analysis was performed at Gangwon-do province's minimum administrative district level. In order to grasp the spatial distribution of the fire, Moran's I, Geary's Ci and Getis-Ord's Gi*, which are methods that analyze the local indicators of spatial association(LISA), were used. By integrating the characteristics of the spatial distribution of fire by integrating the results obtained from each analysis, the advantages of the individual analysis methods were reflected in the study results. As a result of the study, hotspot areas of fire in Gangwon-do was derived out. Among the hot spot areas, some areas, where the fire frequency is higher than the adjacent areas, have been identified. The results of this study can be used as information for predicting the fire hazard area and relocating of fire-fighting facilities in the study area.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.11 no.6
• /
• pp.93-100
• /
• 2003

This paper describes the thermoelastic instability arising from friction heat generation in braking and proposes the finite element methods to predict the variation of temperature and thermal deformation. In a conventional disc brake analysis, heat generation is only related with wheel speed and friction material and the interface pressure between disc and pad is assumed constant. But under dynamic braking conditions, the frictional heat causes the thermoelastic distortion that leads to more concentrated contact pressure distribution and hence more and more non-uniform temperature. In this paper, to complete the solution of the thermomechanically coupled problem, the linear relation model between pressure and temperature is proposed and demonstrated in examples of a simple two dimensional contact problem. And the two dimensional model has been extended to an annular three dimensional disc model in order to consider more realistic geometry and to provide a more accurate critical speed for automotive brake systems.

• Steel and Composite Structures
• /
• v.21 no.6
• /
• pp.1227-1250
• /
• 2016

Most of the research work has been conducted on K-joints under static loading. Very limited information is available in consideration of fatigue strength of K-joints with concrete-filled chord. This paper aims to describe experimental and numerical investigations on stress concentration factors (SCFs) of concrete-filled circular chord and square braces K-joints under balanced axial loading. Experiment was conducted to study the hot spot stress distribution along the intersection of chord and braces in the two specimens with compacting concrete filled in the chord. The test results of stress distribution curves of two specimens were reported. SCFs of concrete-filled circular chord and square braces K-joints were lower than those of corresponding hollow circular chord and square brace K-joints. The corresponding finite element analysis was also conducted to simulate stress distribution along the brace and chord intersection region of joints. It was achieved that experimental and finite element analysis results had good agreement. Therefore, an extensive parametric study was carried out by using the calibrated finite element model to evaluate the effects of main geometric parameters and concrete strength on the behavior of concrete-filled circular chord and square braces K-joints under balanced axial loading. The SCFs at the hot spot locations obtained from ABAQUS were compared with those calculated by using design formula given in the CIDECT for hollow SHS-SHS K-joints. CIDECT Design Guide was generally quite conservative for predicting SCFs of braces and was dangerous for predicting SCFs of chord in concrete-filled circular chord and square braces K-joints. Finally SCF formulae were proposed for circular chord and square braces K-joints with concrete-filled in the chord under balanced axial loading. It is shown that the SCFs calculated from the proposed design equation are generally in agreement with the values derived from finite element analysis, which were proved to be reliable and accurate.

• Journal of information and communication convergence engineering
• /
• v.9 no.4
• /
• pp.358-362
• /
• 2011

The National Emergency Management Agency of South Korea has established a Disaster Victims Psychology Support Center. The Disaster Victims Psychology Support Center can enable victims who got psychological damage from disasters to return to their daily lives through healing activity, field visits and advice of experts. The previous Psychology Support Center System managed the information of disaster victims through an independent database. However, this paper proposes a system that is developed to identify medical institutions and mental health centers within a distance of radius, based on the potential Hot-Spot areas of disaster victims using the GIS Systems. The proposed system can efficiently support selection of appropriate institutions for disaster victims using their location and age, classification of damage, and damaged parts of the body. Also, this spatial analysis can assist to decide on a policy based on the location of disaster victims and the extent of damage. Therefore, this paper can provide the required information to support decision making based on the concentrated areas for disaster victims.

• Journal of Convergence for Information Technology
• /
• v.8 no.1
• /
• pp.161-171
• /
• 2018

This study set out to identify crime vulnerable areas with the GIS spatial analysis technique for the prediction of crimes. Crime vulnerable areas were extracted from the statistics of crimes with the GIS hotspot analysis technique and the inverse distance weighted(IDW) method applied to different crimes according to places and use districts. The scope of surveillance and weight were calculated for each of CPTED surveillance elements including CCTV, streetlamp, patrol division, and police substation. Maps of crime vulnerable areas were overlapped one after another to make a CPTED-based one expressed in four grades(safety, attention, warning, and risk).

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.32 no.6
• /
• pp.790-794
• /
• 2003

This study was carried out to investigate the morphological properties and pyrrolizidine alkaloids of comfrey cultivating in Korea. 12 comfrey samples cultivation in Korea was selected and their appearance (whole plant, leaves, root etc.) were observed by expert and microscopy for morphological analysis. It is confirmed that their species are Symphytum officinale Linnaeus. Samples were extracted by hot MeOH and ultra-sonification. Their extracts contained pyrrolizidine alkaloids, which was identified by TLC analysis. By spraying thin-layer chromatograms of pyrrolizidine alkaloids stable purple spots were developed. But the extracts of chicory, pumpkin and sesame leaves did not show any purple spots. Same HPLC pattern were displayed at about 30 min of retention show peaks an one and the same time.

• Journal of the Korean Society of Radiology
• /
• v.12 no.6
• /
• pp.719-725
• /
• 2018

After 9/11 attacks in the U.S, Terrorism has increased the number of unspecified casualties through multi-use facility terror attacks compared to the past. The subsequent London bombings and the self-destruction of Pakistan increased people's fear and social anxiety. As international events have been held in Korea recently, awareness and concern over radioactive terrorism and security management of radioactive materials are increasing. In this paper, we compared the results of different meteorological conditions using HotSpot Code. After creating a possible terror scenario in Korea, sources likely to be use in RDD and Dirty bomb were investigated. The meteorological condition was selected by comparing the Pasquill-Gifford stability class with the most stable condition F and the most unstable condition A. The result value of the A and F condition through simulation were shown not to cause citizens to die from acute effects due to radiological effects. The range of radioactivity is different according to the wind speed and the meteorological stability, and the degree of radioactivity dilution is different according to meteorological conditions. Analysis results are expected to be used for initial response in the event of a radioactive terrorist attack.