• 제목/요약/키워드: Hot Press

검색결과 495건 처리시간 0.025초

내화처리합판(耐火處理合板)의 열판건조(熱板乾燥)에 관(關)한 연구(硏究) (Studies on Press Drying of Fire-Retardant Treated Plywood)

  • 김종만
    • 한국산림과학회지
    • /
    • 제56권1호
    • /
    • pp.1-25
    • /
    • 1982
  • 건책물(建策物)의 내장(內裝)에 많이 사용(使用)하고 있는 합판(合板)은 가연성(可燃性) 물질(物質)로서 각종(各種) 대형(大型) 화재(火災)를 유발(誘發)하여 많은 인명(人命)과 재산(財産)의 손실(損失)을 초래(招來)하고 있다. 따라서 이로 인(因)한 피해(被害)를 최대한(最大限)으로 줄이기 위하여 내화합판(耐火合板) 제조(製造)의 필요성(必要性)이 절실(絶實)히 요구(要求)되며 또한 내화합판(耐火合板) 제조(製造)에서 우선적(優先的)으로 해결(解決)해야 될 합판(合板)의 건조(乾燥)에 관(關)해서 연구(硏究)할 필요가 있다고 생각한다. 본(本) 연구(硏究)에서는 3.5mm으로 합판(合板)과 5.0mm 합판(合板)에 황산(黃酸)암모늄, 제(第) 1 인산(燐酸) 암모늄, 제(第) 2 인산(燐酸) 암모늄 및 수분처리(水分處理)는 6 및 9시간(時間)으로 처리(處理)하고 붕사(硼砂)-붕산(硼酸) 및 미나리스는 1, 3, 6 및 9시간(時間)으로 처리(處理)하였으며 90, 120 및 $150^{\circ}C$ 등(等)으로 열판건조(熱板乾燥) 실시(實施)한 후(後), 건조곡선(乾燥曲線), 건조속도(乾燥速度), 내화제(耐火劑)의 흡수량(吸收量) 및 내화도(耐火度) 등(等)을 연구검토(硏究檢討)한 결과(結果)를 요약(要約)하면 다음과 같다. 1) 온냉욕법(溫冷浴法)으로 9후간(後間)의 내화처리(耐火處理) 실시(實施)하므로써 얻은 두께 3.5mm합판(合板)의 약제(藥劑) 보유량(保留量)은 제(第) 1 인산(燐酸) 암모늄 $1.353kg/(30cm)^3$, 제(第) 2 인산(燐酸) 암모늄 $1.331kg/(30cm)^3$, 황산(黃酸)암모늄 $1.263kg/(30cm)^3$ 붕사(硼砂)-붕산(硼酸) $1.226kg/(30cm)^3$으로 최저(最低) 보유량(保留量)에 도달(到達)하였으나 미나리스는 $0.906kg/(30cm)^3$로 미달(未達)되었다. 두께 5.0mm 합판(合板)의 약제(藥劑) 보유량(保留量)은 황산(黃酸)암모늄 $1.356kg/(30cm)^3$, 제(第) 2 인산(燐酸) 암모늄 $1.166kg/(30cm)^3$로서 최저(最低) 보유량(保留量)에 도달(到達)하였으나 제(第) 1 인산(燐酸) 암모늄, 붕사(硼砂)-붕산(硼酸)과 미나리스는 미달(未達)이었다. 2) 3.5mm와 5.0mm 합판(合板)의 건조곡선(乾燥曲線)은 6시간(時間)과 9시간(時間)의 내화처리(耐火處理)에서 약제처리(藥劑處理) 합판(合板)이 수분처리(水分處理) 합판(合板)보다 건조곡선(乾燥曲線)의 경사(傾斜)가 더 적었다. 그리고 두께에 따른 건조속도(乾燥速度)는 3.5mm 합판(合板)의 경우(境遇) 5.0mm 합판(合板) 건조속도(乾燥速度)보다 약(約) 3배(倍) 이상(以上) 더 빨랐다. 3) 약제별(藥劑別) 건조속도(乾燥速度)는 열판온도(熱板溫度) $120^{\circ}C$로 건조(乾燥)하였을 때 두께 3.5mm의 합판(合板)에서 제(第) 2 인산(燐酸) 암모늄이 가장 높은 경향(傾向)을 나타내었고 두께 5.0mm의 합판(合板)에서도 제(第) 2 인산(燐酸) 암모늄이 가장 높은 경향(傾向)을 나타내었다. 그러나 처리시간(處理時間) 6시간(時間) 이상(以上)에서 수분처리(水分處理) 합판(合板)의 건조속도(乾燥速度)가 더욱 높았다. 4) 열판온도(熱板溫度)에 따른 건조속도(乾燥速度)는 열판온도(熱板溫度)가 상승(上昇)함에 따라 뚜렷하게 상승(上昇)하였으며 두께 3.5mm 합판(合板)의 경우(境遇) 열판온도(熱板溫度) 90, 120 및 $150^{\circ}C$에서 각각(各各) 1.23%/min., 6.54%/min., 25.75%/min. 였고 두께 5.0mm의 합판(合板)에서는 각각(各各) 0.55%/min., 2.49%/min., 8.19%/min.를 나타내었다. 5) 내화처리(耐火處理) 합판(合板)의 내화도(耐火度)에 있어서 약제(藥劑)사이의 중량(重量) 감소율(減少率)은 두께 3.5mm와 5.0mm 합판(合板)에서 제(第) 2 인산(燐酸) 암모늄이 가장 적었고 다음은 제(第) 1 인산(燐酸) 암모늄이었으며 그 다음은 황산(黃酸)암모늄, 미나리스 및 붕사(硼砂)-붕산(硼酸)의 순서(順序)로 증가(增加)하였다. 착화시간(着火時間), 잔화시간(殘火時間), 이면(裏面)의 탄화면적(炭火面積)에 있어서는 제(第) 2 인산(燐酸) 암모늄이 가장 우수(優秀)하였고, 다음은 제(第) 1 인산(燐酸) 암모늄, 황산(黃酸) 암모늄, 붕사(硼砂)-붕산(硼酸), 미나리스순(順)으로 효과(効果)를 나타냈다.

  • PDF

열(熱) 필터프레스 기술(技術)을 통한 슬러지 탈수율(脫水率) 향상(向上)을 위한 연구(硏究) (A study for Beating Filter Press Dewatering Technology)

  • 이정언;김동수
    • 자원리싸이클링
    • /
    • 제15권3호
    • /
    • pp.38-45
    • /
    • 2006
  • 슬러지 층에 열을 가함으로서 내부증발압, 여액 점도 저하에 따른 유동성 증대 그리고 기공형성 용이성을 통하여 슬러지의 탈수율을 향상시킬 수 있는 열 필터프레스 탈수 기술을 개발하였다. 크기 $470{\times}470mm$인 PP재질의 맨브레인 플레이트 사이에 열수가열판을 장착하여 온도 $95^{\circ}C$, 압력 $1.2kg_f/cm^2$의 열 수를 공급한다. 그리고 슬러지는 최초 슬러지의 $5kg_f/cm^2$의 공급압력에 의해 1 차 탈수가 이루어지며, 맨브레인의 압착력 $15kg_f/cm^2$에 의해 2차적 탈수 공정으로 이루어진다. 갈수기와 우수기때의 슬러지의 초기 함수율 및 유기물 함량을 고려하여 열 탈수 특성을 평가한 결과 우수기의 슬러지는 케이크의 함수율이 약 35 wt%이며, 탈수 속도는 $4DSkg/m^2{\cdot}hr$로 매우 탈수성 우수하였으며, 갈수기 때의 슬러지 또한 함수율이 50 wt%, 탈수속도가 $1.5kg/m^2{\cdot}hr$이상으로 기계식 탈수의 탈수율(함수율 70 wt%, 탈수속도 $0.9kg/m^2{\cdot}hr$)에 비하여 우수하였다. 이를 바탕으로 열 필터프레스 탈수장치의 추가 소요 에너지를 평가한 결과 고형물(DS) 1 kg처리하는데 소요되는 에너지는 약 300kJ로 평가되었다. 이는 탈수케이크를 재차 건조하는 시스템과 의 에너지 투입비를 분석해 본 결과 열 탈수장치의 에너지 소요량은 약 1/3정도로 감소된 것으로 분석되었다. 본 기술은 기존의 필터프레스에 비하여 탈수 속도가 빠르고 저 함수율 탈수 케이크 생산이 용이할 뿐만 아니라 건조장치에 비하여 에너지 소모량이 적어 경제성이 우수한 시스템으로 파악되었다.

F/U 몰비의 변이가 합판의 접착성과 Sliver-PB, Strand-PB의 물성에 미치는 영향 (Effects of Formaldehyde/Urea Molar Ratio on Bonding Strength of Plywood and Properties of Sliver-PB and Strand-PB)

  • 박헌;유영삼
    • Journal of the Korean Wood Science and Technology
    • /
    • 제27권2호
    • /
    • pp.38-45
    • /
    • 1999
  • Formaldehyd/Urea 몰비의 변이가 목질 원재료의 형상이 상이한 합판, SLPB, STPB의 접착성과 물성에 미치는 영향을 조사한 본 연구는 요소수지 F/U 몰비 1.0, 1.2, 1.4, 1.6, 1.8, 2.0으로 요소수지를 제조하고 그 형상이 상이한 목질 원재료인 veneer, sliver-particle, strand-particle를 원료로 하여 각 몰비별 합판, SLPB, STPB를 제조하였다. 합판의 상태접착력, SLPB, STPB의 밀도, 함수율, 박리강도, 휨강도, 두께 팽창율을 시험하였다. 실험 결과를 요약하면 다음과 같다. 1. 합판의 접착력은 F/U 몰비 1.2에서 가장 우수한 값을 나타냈으며 전 몰비 모두 KS 합판 접착성(비내수) 규격인 7.5kgf/$cm^2$을 상회하는 14kgf$cm^2$ 이상을 나타냈다. 또한 F/U 몰비 1.2의 경우 본 연구자(1998)의 연구결과인 formaldehyde 방출 무취기준(5mg/$\ell$ 이하)율 만족시키면서 우수한 접착성울 나타냈다. 2. 박리강도는 SLPB 및 STPB 공히 모두 F/U 몰비 1.0, 2.0이 낮은 결과치를 나타냈고 1.2~1.8사이에서는 큰차이는 없었으며, SLPB의 경우 4.8~5.9kgf/$cm^2$의 값의 분포를 STPB는 5.4~6.7 kgf/$cm^2$의 분포를 보이고 있어 STPB가 우수한 박리강도를 나타냈다. 이 결과에서 F/U 몰비에 따른 박리강도의 영향 보다는 원재료의 형상에 따른 영향이 더 크다는 사실을 알 수 있었다. 3. 휨강도도 역시 SLPB 및 STPB 공히 F/U 몰비 1.0, 2.0이 낮은 결과치를 나타냈다. STPB 전몰비 모두가 KS 규격 200 Type(휨강도가 180kgf/$cm^2$) 이상을 만족시키는 결과를 보였고 SLPB의 경우도 전몰비 모두 KS 규격 150 Type(휨 강도가 130kgf/$cm^2$)이상을 만족시키는 결과를 나타냈다. 이 결과에서는 전체적으로 STPB가 SLPB에 비하여 2배 이상의 우수한 강도를 보였다. 이는 휨강도에서도 F/U 몰비에 따른 영향보다는 원재료의 형상에 따른 영향이 더 크다는 사실을 알 수 있었다. 4. 두께 팽창율에서는 고몰비인 2.0, 1.8 저몰비인 1.0, 1.2에서 SLPB, STPB 모두 높은 두께 팽창율을 보였으며 STPB의 경우 F/U 몰비 1.6에서 SLPB의 경우는 F/U 몰비 1.4에서 가장 낮은 두께 팽창율을 나타냈다. 그리고, STPB의 경우 6몰비 모두 KS기준 12% 이하를 만족시키고 있었으나 SLPB에서는 그 기준을 모두 상회하고 있음을 알 수 있었다. 전체적으로는 SLPB가 STPB보다 약 2배의 두께 팽창율을 나타내 두께 팽창율에서도 F/U 몰비에 따른 영향보다는 원재료의 형상에 따른 영향이 더 크다는 사실을 알 수 있었다. 본 실험의 결과를 종합적으로 살펴보면 합판의 접착성 및 보드의 재질에 미치는 영향은 F/U 몰비의 변이 보다는 원재료의 형상의 영향이 이 더욱 크게 작용한다는 사실을 알 수 있었으며 보드의 제조기준이 본 실험과 동일하다면 합판의 접착성과 PB의 물리적, 기계적 성질과 본 연구자(1998)의 연구결과인 formaldehyde 방출량 및 방출경향을 고려할 때 사용처와 용도에 따라 합판의 경우 우수한 접착력과 KS formaldehyde 무취기준을 만족시키는 F/U 몰비 1.2를 PB의 경우 양호한 휨강도, 박리강도, 비교적 낮은 두께 팽창율과 KS formaldehyde E2형 (5mg/$\ell$ 이하)기준율 만족시키는 F/U 몰비 1.2~1.4가 사용되어야 함을 알 수 있었다.

  • PDF

노인이 경험한 대체요법의 양상에 관한 연구 1 (A Study on the Patterns of Alternative Therapy Experienced by the Aged)

  • 이강이;김순이
    • 대한간호학회지
    • /
    • 제29권2호
    • /
    • pp.336-345
    • /
    • 1999
  • This study looks at the various alternative therapy methods used in day to day life by elderly, over 60 years of age. The elderly have come to know and practice these methods for the following reasons it is good for the health ; it is the method used in the of fen days when there wesn't modern medicine ; it has been passed down from generations ; it can be done at home without having the need to go to the hospital ; acupuncture or poulticing can be used ; it can be done at home, which was an important factor in rural areas where hospitals are few and far between ; and 〔herbal〕 medicine could be prepared at home at no cost ; it derives from experience ; it is impossible to ignore tradition passed down through the generations. Diet control and plants (herbs) are methods most often used. as they are easy to find and can be readily used in critical situations. Other methods include oriental medicine practices of moxibustion with moxa cone, negative therapy, hand and finger acupunture, finger press method. ordinary acupunture, manual healing methods of massage. diaphoretic therapy and meditation to reach a state of calm, and qigong dirigation. The reasons for its use are as follows ; it has been used before ; it is effective ; there is some improvement after the treatment ; it is not harmful to the body ; medicine cannot be obtained and it is the only thing available ; it is not good for an old person to go to the hospital everyday. the symptoms are not serious enough to go to a hospital : and acupuncture is for these things. The means that the elderly have come to practice these methods are : it has been used since the past ; it has been told by the elders ; they have been told by friends ; it was part of their knowledge ; and they have come to know by watching their mother. Further, to regain vitality lost through old age, the elderly have relied on hot soup. a hearty meal. brewed honey water, pumpkin, or ginseng. Humans, by instinct. would rub or massage the areas that caused pain. These actions, combined with a breathing technique have been recognized in Tong-Eui-Bo-Gam(the essential of eastern medicine), the complete work of early modern medicine, are a useful means to revive chi(기). This knowledge is thought to have greatly affected our heathy lifestyle. Furthermore, though the demand for medical services would increase with age, the elderly have not always been able to tend to their needs at the hospital for reasons economic or other. Hence, these alternative therapy methods seem to have been practiced as a temporary means of relief. The excellence of our traditional therapeutic custom has not received full recognition due to the argument relating to its scientific merits. As a result, it has become vital to prove their effectiveness through scientific and other experimental means. The potency of moxibustion with moxa cone and hand and finger acupunture have been proven scientifically. but diet and herbal methods appear to be practiced as a result of customs passed down from generations. In addition, it is submitted that the effectiveness of the traditional methods of disease control and our heathy lifestyle that are easily found in the nursing field must be verified.

  • PDF

낙엽송(落葉松) 간벌목(間伐木)을 원료(原料)로 한 Oriented Strand Board(OSB)의 목표밀도(目標密度)와 Strand Size가 OSB의 재질(材質)에 미치는 영향(影響) (Effects of Target Density and Strand Size on Properties of Oriented Strand Board Composed of Thinned Wood of Larix leptolepis Gordon)

  • 박헌;강은창
    • Journal of the Korean Wood Science and Technology
    • /
    • 제24권4호
    • /
    • pp.56-63
    • /
    • 1996
  • This study was to manufacture thinned wood of Larix leptolepis Gordon into Oriented Strand Board(OSB) with Urea-Formaldehyde Resin. The OSB was made of four kinds of strand in slenderness ratio 150 ; thickness $0.3{\pm}0.05mm$, $0.4{\pm}0.05mm$, $0.5{\pm}0.05mm$ and $0.6{\pm}0.05mm$, respectively length 45mm, 60mm, 75mm and 90mm. Target densities were 0.65gr/$cm^3$, 0.75gr/$cm^3$ and 0.85gr/$cm^3$. The stepwise 9 minutes-multi-pressing schedule in the maximum pressure 40kgf/$cm^2$, the minimum pressure 10kgf/$cm^2$ was applied for $400mm{\times}390mm{\times}12mm$ board at the temperature of $150^{\circ}C$ in a hot press. In MOR The OSB of thin strand thickness $0.3{\pm}0.05mm$(length 45mm) and density 0.85gr/$cm^3$ was the highest. The strand thickness had more effect on MOR than the strand length. In strand thickness $0.4{\pm}0.05mm$(length 60mm) and density 0.85gr/$cm^3$ was the highest MOE. The strand thickness and length had adverse effects on MOE each other. At internal bonding. The OSB of strand thickness $0.3{\pm}0.05mm$(length 45mm) and board density 0.75gr/$cm^3$ showed the highest value. OSB had higher IB value with thinner strand thickness. The thinner strand thickness showed the lower thickness swelling in turn $0.3{\pm}0.05mm$(length 45mm), $0.4{\pm}0.05mm$(length 60mm), $0.5{\pm}0.05mm$(length 75mm). $0.6{\pm}0.05mm$(length 90mm). Target densities 0.75gr/$cm^3$ 0.65gr/$cm^3$, 0.85gr/$cm^3$ showed in turn lower value. Finally, The OSB made of thinned wood of Larix leptolepis Gordon showed good results in laboratory experiment.

  • PDF

SiO2 나노 콜로이드 첨가량에 따른 질화규소의 트라이볼러지 (Tribology of Si3N4 Ceramics Depending on Amount of Added SiO2 Nanocolloid)

  • 남기우;정영규;황석환;김종순;문창권
    • 대한기계학회논문집A
    • /
    • 제35권3호
    • /
    • pp.267-272
    • /
    • 2011
  • 본 연구는 $SiO_2$ 나노 콜로이드 첨가량에 따르는 $Si_3N_4$ 세라믹스의 마멸 특성을 평가하였다. 시험 편은 35 MPa, 2123 K의 질소 가스 분위기 1시간동안 소결하였다. 마멸 시험은 링 블록 시험기를 사용 하였으며, 시험 조건은 직경 35 mm인 링의 회전속도50 rpm, 하중 9.8 N, 실험중의 대기 온도 293 K이 었다. 세라믹스의 마멸계수는 약 1.0, 마멸손실은 약 0.02 mm이었다. 본 연구에 사용된 시험편 중에서 1.3 wt% $SiO_2$ 나노 콜로이드가 첨가된 시험편은 가장 낮은 마멸계수와 마멸 손실을 나타내어, 최상의 마멸 저항성을 나타내었다. 이것은 가장 높은 비커스 경도와 굽힘 강도를 나타내었다. 마멸계수는 경도 와 굽힘 강도에 역비례 관계를 보였다.

오존산화 콩기름의 구조분석 및 이를 이용한 변성 pMDI 접착제의 중량비에 따른 접착력 변화 (Studies on Chemical Strutures and Adhesion Performance of pMDI Adhesives Modified by Ozonized Soybean Oil with Different Mixing Ratios)

  • 유영삼;이현종;이택준;박헌
    • Journal of the Korean Wood Science and Technology
    • /
    • 제37권1호
    • /
    • pp.56-64
    • /
    • 2009
  • 본 연구의 목적은 콩기름을 오존 산화 처리하여 기능기를 도입하고 이를 바탕으로 친환경 목재 접착제를 개발하는 것이다. 시판용 콩기름을 시간당 약 7.13 g의 오존을 발생시켜 15분, 30분, 60분, 120분간 오존산화 처리한 후 FT-IR, $^1H$-NMR, MALDI-TOF MS, GC/MS 측정하여 구조변화를 분석하였다. 기기분석 결과 오존산화처리에 의하여 콩기름의 불포화 이중결합이 개열되어 카르복실기 또는 알데하이드기가 생성됨을 확인하였다. 오존산화콩기름 변성 pMDI 접착제의 접착력은 오존처리 정도와 pMDI의 혼합비율에 따라 달라지며, KS F 3101 보통합판기준 내수 접착강도를 안정적으로 만족 시키는 조건은 오존산화 처리시간 30분~60분, pMDI와 1:1로 혼합한 경우이며, 준내수 접착강도를 만족시키는 범위는 오존산화 처리시간 30분~60분, pMDI의 혼합비 0.5이상, 상태접착강도를 만족시키는 범위는 오존산화 처리시간 15분~60분, pMDI의 혼합비 0.25 이상임을 알 수 있었다. 위의 실험결과를 종합하여 볼 때, 오존산화 처리한 식용유는 오존처리시간 및 pMDI의 혼합비율을 조절하면 상태접착력 뿐만 아니라 내수접착력이 요구되는 목질복합재료 제조용 접착제 제조가 가능함을 확인할 수 있었다.

석탄계 핏치를 결합재로한 탄소/탄소 복합재의 제조 및 특징 (Fabrication and Characteristics of CFRC(Carbon Firber Reinforced Carbon Composites) Fabricated with Carbon Fiber and Coal Tar Pitch Matrix)

  • 주혁종;최돈묵;오인석
    • 한국재료학회지
    • /
    • 제4권2호
    • /
    • pp.194-205
    • /
    • 1994
  • 본 연구에서는 원료 석탄 핏치와 흑연화성이 우수한 THF 가용성분만을 추출한 핏치 결합재에 8H/Satin woven fabric 프리프레그 및 고탄성 및 고강도계 연속 탄소섬유 등을 보강하여 가압열성형법으로 green body 를 제조한 다음 탄화, 함침, 재탄화 및 흑연화 공정을 거쳐 열적 미 기계적물성이 우수한 CFRC를 제조하였으며, 주사전자현미경, 편광현미경, X선회절분석,열중량분석, 굴곡강도, 굴곡탄성률, 충간전단강도 등을 시험하였다. THFSP결합재를 $2300^{\circ}C$까지 열처리 한 다음 X선회절분석을 한 결과, 결정성이 가장 우수하여 (002) 면에서 $C_0$/2인 값이 3.380$\AA$였으며, 2$\theta$값도 $26.276^{\circ}$로 천연흑연의 Bragg angle에 거의 접근하였으며 공기산화 반응특성을 시험하기 위하여 등온 열중량분석을 한 결과 $2300^{\circ}C$까지 흑연화 한 THFSP결합재가 산화에 대하여 가장 우수한 저항성을 나타내었다. 섬유용적률이 증가됨에 따라 65~70%까지는 기계적 물성이 중가하는 경향을 보였지만 그이상 섬유가 보강된 CFRC는 결합재의 부족으로 인하여 오히려 기계적 물성이 감소하였다. 또한 굴곡강도 시험후 주사전자현미경으로 파괴 단면을 관찰한 결과 THFSP결합재가 흑연화성이 우수하여 파괴시 결합재가 외력에 대한 흡수가 양호하여 보강재의 파괴를 억제했기 때문에 기계적 물성도 우수하게 나타났다.

  • PDF

$\cdot$$\cdot$주별 열에너지 소비절약 실태에 관한 조사연구 (An Exploratory Study of Energy Conservation Practices in Clothing, Food, and Housing)

  • 강혜원
    • 대한가정학회지
    • /
    • 제19권2호
    • /
    • pp.11-24
    • /
    • 1981
  • The objectives of the study were to determine 1) if energy consumption and conservation vary in clothing, food, and housing with independent variables-size of household, homemaker's age, employment, and level of education, level of living, type of house, electricity use, and all energy use, and 2) if there is a correlation among energy conservation practices in clothing, food, and housing. Questionnaires wee given to the randomly selected homemakers in Seoul in July, 1980. Data from 620 responses were analyzed by F-test (Analysis of Variance) and Correlation. The results are as follows: 1. Clothing (1) the scores of the conservation practices I clothing were generally high. /However, it was found that a) they did not practice in wearing heavy under clothes and behavior outer clothing to cope with cool room temperature in the winter, b) they did not use bleach for laundry, but they used boiling method, and c) they did not have enough knowledge on Permanent Press finish. (2) energy conservation practices in clothing were significantly related to level of living and homemakrer's level of education. a) The higher the level of living, the higher scores in the knowledge were found. b) the higher the homeakcer's level of education, the higher scores in the knowledge and ironing were obtained. 2. Food (1) The scores of the conservation practices in food were generally high. However, it was found that scientific cooking methods were not performed such as a) to use measuring spoons, cups, and timers, b) to practice a simple method in using solor energy for warming water, c) to use thermos for the hot water tea or coffee, but they boiled water whenever necessary, and b) to use the pressure cooker whenever possible. (2) Energy conservation practices in food were significantly related to homemaker's employment and type of dwellings. a) The scores of full-time homemakers (not gainfully employed) were higher than gainfully employed homemakers. b) Families in traditional Korean dwellings revealed higher scores than those in apartment or western style dwellings. 3. Housing (1) The scores of the conservation practices in housing were generally high. However, it was found that a) they did not install fans in the kitchen, bathroom, and attic in the summer, b) they did not install a humidifier for tolerating a lower room temperature in the winer, c) they did not practice to make plans for the door of the refrigerator remained open for the shortest time, d) they did not install or use a local lighting with a general lighting for reading and cooking, and e) they usedaluminum foil without the knowledge of the heat reaction of its shiny and dull sides. (2) energy conservation practices in housing were significantly related to homemaker's employment and level of education, economic status, types of dwelling, and all energy use, a) Full-time homeakers had higher scores than gainfully employed homeakers. b) the higher the homemaker's level of education and economics status, the higher scores were obtained. c) Homeakers with their own house scored higher points than those with rented houses. And families in apartment or row houses scored higher points than those in traditional korean or western style dwellings. d) The higher the consumption rate of electricity and all energy, the higher scores were revealed. 4. correlation there was a significant correlation among energy conservation practices I clothing, food, and housing.

  • PDF

생혜탕(生慧湯)이 흰쥐의 학습(學習)과 기억(記憶)에 미치는 영향(影響) (Effects of Saenghyetang on Learning and Memory Performances in Mice)

  • 유금룡;장규태;김장현
    • 대한한방소아과학회지
    • /
    • 제15권1호
    • /
    • pp.77-104
    • /
    • 2001
  • The effects of the oriental herbal medicine Saenghyetang(SHT, 生慧湯), which consists of Rehmanniae Radix (熟地黃 九蒸: was made by 9th steam) 40g, Corni Fructus(山茱黃) 16g, Polygalae Radix(遠志) 8g, Zizyphi Spinosae Semen(酸棗仁) 2g, Biotae Semen(柏子仁 去油: oil ingredient was removed) 20g, Poria Cocos(茯笭) 12g, Ginseng Radix(人蔘) 12g, Acori Graminei Rhizoma(石菖蒲) 2g, Sinapis Semen(白芥子) 8g, on learning ability and memory were investigated. Hot water extract(HWE) and ethanol extract(EE) from SHT were used for the studies. Learning ability and memory are related to modifications of synaptic strength among neurons that interactive. Enhanced synaptic coincidence detection leads to improved learning ability and memory. If the NMDA receptor, a synaptic coincidence detector, acts as a graded switch for memory formations, enhanced signal detection by NMDA receptors should enhance learning ability and memory. It was shown that NR2B was increased in the forebrains of oriental medicine-administrated mice, leading to enhanced activation of NMDA receptors and facilitating synaptic potentiation in response to stimulation at 10-100 Hz. These HWE-SHT treated mice exhibited that superior ability in learning and memory when performing various behavioral tasks, showing that NR2B is enhanced by HWE-SHT treatment and also is critical in gating the age-dependent threshold for plasticity and memory formation. NMDA receptor-dependent modifications, which were mediated in part by HWE administration, of synaptic efficacy, therefore, represent a mechanism for associative learning ability and memory. Results suggest that oriental medical enhancement of NR2B contributes to increase intelligence and memory in mammals On the other hand, to examine the effects of EE-SHT on the learning ability and memory in experimental mice, EE-SHT was tested on passive and active avoidance responses. The EE-SHT ameliorated the memory retrieval deficit induced by ethanol in mice, but not other memory impairments. EE-SHT(10, 20mg/100 g, p.o.) did not affect the passive avoidance responses of normal mice in the step through and step down tests, the conditioned and unconditioned avoidance responses of normal mice in the shuttle box, lever press performance tests and the ambulatory activity of normal mice in a normal condition. However, EE-SHT at 20 mg/kg significantly decrease the spontaneous motor activity during the shuttle box test, and also to extend the sleeping time induced by pentobarbital in mice. These results suggest that SHT has an ameliorating effect on memory retrieval impairments and a weak tranquilizing action.

  • PDF