• 대한기계학회논문집B
• /
• 제41권5호
• /
• pp.321-328
• /
• 2017

본 연구에서는 고온측과 저온측의 온도 예측을 위한 볼텍스 튜브 모델을 개발하였다. 볼텍스 튜브 모델은 시스템 식별 방법을 기반으로 개발하였으며, 개발된 볼텍스 튜브 모델은 ARX(Auto-Regressive with eXtra inputs)모델을 기반으로 하여 설계되었다. 본 연구에서 유도된 다항식 모델은 모델의 정확성을 확인하기 위해 실험데이터와 검증하였다. 또한, 유도된 모델은 안정성 검사 통과를 보여준다. 저온측 스로틀 밸브 각도를 변경하였을 때, 적절히 온도 분리가 이루어지는 것을 확인하였으며, 동적응답을 확인하기 위해 저온측 스로틀 밸브 각도를 변경 시켰을 경우, 볼텍스 튜브 모델의 온도가 적절히 분리 되는 것을 확인할 수 있다. 결론적으로, 개발된 볼텍스 튜브 모델을 저온측 스로틀 밸브 각도에 따라 온도 분리 예측이 가능하다는 것을 확인할 수 있다.

• Nuclear Engineering and Technology
• /
• 제44권4호
• /
• pp.393-404
• /
• 2012

After the Fukushima nuclear accident in 2011, there has been increasing concern regarding severe accidents in nuclear facilities. Severe accident scenarios are difficult for operators to monitor and identify. Therefore, accurate prediction of a severe accident is important in order to manage it appropriately in the unfavorable conditions. In this study, artificial intelligence (AI) techniques, such as support vector classification (SVC), probabilistic neural network (PNN), group method of data handling (GMDH), and fuzzy neural network (FNN), were used to monitor the major transient scenarios of a severe accident caused by three different initiating events, the hot-leg loss of coolant accident (LOCA), the cold-leg LOCA, and the steam generator tube rupture in pressurized water reactors (PWRs). The SVC and PNN models were used for the event classification. The GMDH and FNN models were employed to accurately predict the important timing representing severe accident scenarios. In addition, in order to verify the proposed algorithm, data from a number of numerical simulations were required in order to train the AI techniques due to the shortage of real LOCA data. The data was acquired by performing simulations using the MAAP4 code. The prediction accuracy of the three types of initiating events was sufficiently high to predict severe accident scenarios. Therefore, the AI techniques can be applied successfully in the identification and monitoring of severe accident scenarios in real PWRs.

• 한국지능시스템학회논문지
• /
• 제8권2호
• /
• pp.1-8
• /
• 1998

In this paper, a method which cna detect tracking caused by the insulation deterioration of conduct wiring, is proposed. To investigate it, we analyzed the harmonics of each load current waveform and those of tracking current waveform with FFT. The computer which take experiment data is learned by neural network algorithm, which has recently been used for the load recognition. The proposed metod in our study can be applied to the development of several measuring equipments such as hotline insulation tester, cna earch tester for the detection of tracking under hot-line state, Furthermore, it can substitutes molded case circuit breaker, fuse, and so on.

• 한국정보처리학회:학술대회논문집
• /
• 한국정보처리학회 2022년도 추계학술발표대회
• /
• pp.721-723
• /
• 2022

최근 낸드 플래시 메모리 기반의 Solid State Drive(SSD)가 기존 Hard Disk Drive(HDD)를 대신하여 개인용과 산업용으로도 널리 쓰이고 있다. 핫 데이터 구분 기법은 이러한 SSD 의 성능과 수명에 중요한 역할을 하는 Garbage Collection(GC)과 Wear Leveling(WL) 기술의 기반이 된다. 본 논문에서는 핫 데이터를 예측하기 위한 나이브 베이즈 분류 기반의 새로운 핫 데이터 구분 기법을 제안한다. 제안 기법은 워크로드 액세스 패턴의 학습 단계인 초기 단계와 실제 운영 단계를 통해 다시 액세스 될 확률이 높은 데이터를 그렇지 않은 데이터와 효과적으로 구분한다. 다양한 실제 trace 기반 실험을 통해 본 제안 기법이 기존 대표적인 기법보다 평균 19.3% 높은 성능을 확인했다.

• 한국안전학회지
• /
• 제38권4호
• /
• pp.23-31
• /
• 2023

Revising the Occupational Safety and Health Act led to enacting and revising related laws and systems, such as placing fire observers in hot workplaces. However, the operating standards in such cases are still ambiguous. Although fire accidents occur through multiple and multi-step factors, the hazards of fire accidents have been identified in this study as individual rather than interrelated factors. The aim has been to identify multiple factors of accidents, outlining fire and explosion accidents that recently occurred in the domestic manufacturing industry. First, major keywords were extracted through text mining. Then representative accident types were derived by combining the main keywords through the co-word network analysis to identify the hazards and their relationships. The representative fire accidents were identified as six types, and their major hazards were then addressed for improving safety measures using the identification of hazards in the "Risk Assessment" tool. It is found that various safety measures, such as professional fire observers' training and clear placement standards, are needed. This study will provide useful basic data for revising practical laws and guidelines for fire accident prevention, system supplementation, safety policy establishment, and future related research.

• Metals and materials international
• /
• 제24권6호
• /
• pp.1193-1201
• /
• 2018

Dilatometry is a useful technique to obtain experimental data concerning transformation. In this paper, a dilation conversional model was established to calculate carbides fraction in AISI H13 hot-work tool steel based on the measured length changes. After carbides precipitation, the alloy contents in the matrix changed. In the usual models, the content of carbon atoms after precipitation is considered as the only element that affects the lattice constant and the content of the alloy elements such as Cr, Mo, Mn, V are often ignored. In the model introduced in this paper, the alloying elements (Cr, Mo, Mn, V) changes caused by carbides precipitation are incorporated. The carbides were identified using scanning electron microscope and transmission electron microscope. The relationship between lattice constant of carbides and temperature are measured by high-temperature X-ray diffraction. The results indicate that the carbides observed in all specimens cooled at different rates are V-rich MC and Cr-rich $M_{23}C_6$, and most of them are V-rich MC, only very few are Cr-rich $M_{23}C_6$. The model including the effects of substitutional alloying elements shows a good improvement on carbides fraction predictions. In addition, lower cooling rate advances the carbides precipitation for AISI H13 specimens. The results between experiments and mathematical model agree well.

• 정보화정책
• /
• 제27권2호
• /
• pp.66-83
• /
• 2020

시민들은 도시 내 발생되고 있는 지역문제에 대해 큰 관심을 가지고 있다. 지방정부는 이러한 지역문제들을 해결하기 위해 노력하고 있지만 시민들의 생활 불편을 줄여주기는 쉽지 않고 이로 인한 시민들의 불만은 민원으로 이어지고 있다. 이를 해소할 수 있는 대안으로 빅데이터 활용을 통해 민원의 특성을 파악하고, 시민들에게 선제적 편의성을 제공하기 위한 노력이 절실하다. 본 논문에서는 LDA 토픽모델링 기법을 활용하여 전자민원의 동향 분석에 관한 연구를 실시한다. 이를 위해 2015~2017년 9,625건의 부산시 전자민원을 대상으로 20개의 민원토픽을 추출하였다. 도출된 민원토픽을 통해 핵심민원을 파악하고, 분기별 비중 추이 분석을 통하여 4개의 Hot 민원(버스정차, 택시기사, 칭찬, 민원처리)과 4개의 Cold 민원(cctv설치, 버스노선, 공원주차장, 축제 불만)을 도출하였다. 본 연구는 민원동향을 파악하기 위해 빅데이터 분석 방법을 제시하였고, 후속 연구를 유발하였다는 학문적 기여도가 있다. 또한 민원분석을 위해 사용한 텍스트마이닝 기법은 빅데이터 처리가 필요한 다른 행정업무에도 활용될 수 있다.

• Earthquakes and Structures
• /
• 제8권4호
• /
• pp.935-956
• /
• 2015

Structural Health Monitoring (SHM) of steel towers has become a hot research topic. From the literature, it is impractical and impossible to develop a "general" method that can detect all kinds of damages for all types of structures. A practical method should make use of the characteristics of the type of structures and the kind of damages. This paper reports a feasibility study on the use of measured modal parameters for the detection of damaged braces of tower structures following the Bayesian probabilistic approach. A substructure-based structural model-updating scheme, which groups different parts of the target structure systematically and is specially designed for tower structures, is developed to identify the stiffness distributions of the target structure under the undamaged and possibly damaged conditions. By comparing the identified stiffness distributions, the damage locations and the corresponding damage extents can be detected. By following the Bayesian theory, the probability model of the uncertain parameters is derived. The most probable model of the steel tower can be obtained by maximizing the probability density function (PDF) of the model parameters. Experimental case studies were employed to verify the proposed method. The contributions of this paper are not only on the proposal of the substructure-based Bayesian model updating method but also on the verification of the proposed methodology through measured data from a scale model of transmission tower under laboratory conditions.

• 국제학술발표논문집
• /
• The 7th International Conference on Construction Engineering and Project Management Summit Forum on Sustainable Construction and Management
• /
• pp.24-31
• /
• 2017

As the concept of sustainability becomes more and more popular, a large amount of literature have been recorded recently on intelligent green building and smart city (IGB&SC). It is therefore needed to systematically analyse the existing knowledge structure as well as the future new development of this domain through the identification of the thematic trends, landmark articles, typical keywords together with co-operative researchers. In this paper, Citespace software package is applied to analyse the citation networks and other relevant data of the past eleven years (from 2006 to 2016) collected from Web of Science (WOS). Through this, a series of professional document analysis are conducted, including the production of core authors, the influence made by the most cited authors, keywords extraction and timezone analysis, hot topics of research, highly cited papers and trends with regard to co-citation analysis, etc. As a result, the development track of the IGB&SC domains is revealed and visualized and the following results reached: (i) in the research area of IGB&SC, the most productive researcher is Winters JV and Caragliu A is most influential on the other hand; (ii) different focuses of IGB&SC research have been emerged continually from 2006 to 2016 e.g. smart growth, sustainability, smart city, big data, etc.; (iii) Hollands's work is identified with the most citations and the emerging trends, as revealed from the bursts analysis in document co-citations, can be concluded as smart growth, the assessment of intelligent green building and smart city.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2008년도 학술발표회 논문집
• /
• pp.194-198
• /
• 2008

Significant soil erosion and water quality degradation issues are occurring at highland agricultural areas of Kangwon province because of agronomic and topographical specialities of the region. Thus spatial and temporal modeling techniques are often utilized to analyze soil erosion and sediment behaviors at watershed scale. The Soil and Water Assessment Tool (SWAT) model is one of the watershed scale models that have been widely used for these ends in Korea. In most cases, the SWAT users tend to use the readily available input dataset, such as the Ministry of Environment (MOE) land cover data ignoring temporal and spatial changes in land cover. Spatial and temporal resolutions of the MOE land cover data are not good enough to reflect field condition for accurate assesment of soil erosion and sediment behaviors. Especially accelerated soil erosion is occurring from agricultural fields, which is sometimes not possible to identify with low-resolution MOD land cover data. Thus new land cover data is prepared with cadastral map and high spatial resolution images of the Doam-dam watershed. The SWAT model was calibrated and validated with this land cover data. The EI values were 0.79 and 0.85 for streamflow calibration and validation, respectively. The EI were 0.79 and 0.86 for sediment calibration and validation, respectively. These EI values were greater than those with MOE land cover data. With newly prepared land cover dataset for the Doam-dam watershed, the SWAT model better predicts hydrologic and sediment behaviors. The number of HRUs with new land cover data increased by 70.2% compared with that with the MOE land cover, indicating better representation of small-sized agricultural field boundaries. The SWAT estimated annual average sediment yield with the MOE land cover data was 61.8 ton/ha/year for the Doam-dam watershed, while 36.2 ton/ha/year (70.7% difference) of annual sediment yield with new land cover data. Especially the most significant difference in estimated sediment yield was 548.0% for the subwatershed #2 (165.9 ton/ha/year with the MOE land cover data and 25.6 ton/ha/year with new land cover data developed in this study). The results obtained in this study implies that the use of MOE land cover data in SWAT sediment simulation for the Doam-dam watershed could results in 70.7% differences in overall sediment estimation and incorrect identification of sediment hot spot areas (such as subwatershed #2) for effective sediment management. Therefore it is recommended that one needs to carefully validate land cover for the study watershed for accurate hydrologic and sediment simulation with the SWAT model.