• Journal of the Korean Society of Systems Engineering
• /
• v.2 no.1
• /
• pp.24-30
• /
• 2006

In this study, the design concepts for Intelligent Hospital are derived using the Quality Function Deployment(QFD) and System Requirement Analysis Method. First, requirements for important elements of Intelligent hospital are defined. Second, similar systems are compared and user requirement are refined. Through this process, operational requirement for Intelligent Hospital are defined by combining user requirements and similar systems. To analyze operational requirement, the QFD of the system engineering approach are implemented. Alternative design specifications are constructed by implementing the QFD results by building the Morphological Matrix. Various concepts that satisfy the system requirement are derived. Finally the best design concept are obtained using the Pugh concept selection matrix.

• Health Policy and Management
• /
• v.4 no.2
• /
• pp.111-125
• /
• 1994

In developing total hospital information system, large amount of time and expense are to be spent while its results are likely to lead itself to end-users' dissatisfaction. Some of the main complaints on the part of end-users come from insufficient consideration of end-users environment as well as inappropriate representation of their requirement in the system alalysis and design. This papre addresses some advantages of Essential Logical Modeling Process for better analysis and design, explaining by example the developmental process of the Patent Management and Accounting System for a tertiary care hospital. In the case, the Essential Model, suggested by McMenamin and Palmer, proved to be an effective tool for clear separation of analysis and design phase and for better communication among system developers and with end-users. The modeling process itself contributed to better program modularity as well, shown in a Structured Chart. Difficulties in learning how to identify' essential activities' for the modeling practice were experienced in the beginnins stage, which were, however, overcome by elaborating some heuristic guideling and by rdferring to necessary tools including State Transition Diagram, Control Flow Diagram, and so many. While full evaluation of the Essential Model usag remains to wait till the completion of the case project, its strengt in making clear distinction between analysis and design phase was enough to be attractive to system analysts. The model concepts are open to many further application fields, particularly such areas as business re engineering, process remodeling, office automation, and organizational restructuring.

• Journal of The Korea Institute of Healthcare Architecture
• /
• v.16 no.2
• /
• pp.65-75
• /
• 2010

Space transformation of hospital architecture happens more rapidly than other types such as school and office buildings. This requirement is caused by medical demand, service transformation, technical development and equipment changes. Grand scale extension and rapid change in hospital architecture affects whole planning; therefore, it is important to design in the macro perspective such like Life Cycle. Grand scale extension is difficult process to rebuild growth and transfer of hospital architecture and to adapt to the future change. That's why simple planning gives limits to some departments in a short-term and brings another reform such as more extension or interior renovation in a long-term. This study surveys various space transformation and grand scale extension of EB hospital extended recently, and it is to find planning condition in extension.

• Korean Journal of Adult Nursing
• /
• v.26 no.6
• /
• pp.621-629
• /
• 2014

Purpose: The purpose of this study was to investigate the nutritional support, gastric residual volume, and nutritional status of the intensive care unit (ICU) patients on enteral feeding. Methods: A descriptive longitudinal design was used to collect 5 day data on enteral nutrition of 52 ICU patients in an university hospital. Nutritional support was calculated with actual caloric intake compared to individual caloric requirement. Residual volumes were measured prior to routine feedings, and the serum albumin levels and the total lymphocyte counts were checked to evaluate nutritional status. The data were analyzed using one group repeated measures ANOVA, paired t-test, and Spearman's bivariate correlation analysis. Results: The subjects received their first enteral feeding on the $5.75^{th}$ day of ICU admission. The mean nutritional support rate was 49.1% of the requirement, however prescription rate and support rate were increased as time goes by. Gastric residual volumes were less than 10 cc in 95% cases. A significant negative correlation was found between nutritional support and nutritional status. Conclusion: The nutritional support for ICU patient was low compared to the requirement, and their nutritional status was worse than at the time of ICU admission. Further studies are necessary to develop nursing interventions for improving nutritional support for ICU patients.

• Restorative Dentistry and Endodontics
• /
• v.49 no.1
• /
• pp.3.1-3.8
• /
• 2024

This article is a narrative review that discusses the recommended sample size requirements to design a pilot study to assess the reliability of a questionnaire. A list of various sample size tables that are based on the kappa agreement test, intra-class correlation test and Cronbach's alpha test has been compiled together. For all calculations, type I error (alpha) was set at a maximum value of 0.05, and power was set at a minimum value of 80.0%. For the kappa agreement test, intra-class correlation test, and Cronbach's alpha test, the recommended minimum sample size requirement based on the ideal effect sizes shall be at least 15, 22, and 24 subjects respectively. By making allowances for a non-response rate of 20.0%, a minimum sample size of 30 respondents will be sufficient to assess the reliability of the questionnaire. The clear guideline of minimum sample size requirement for the pilot study to assess the reliability of a questionnaire is discussed and this will ease researchers in preparation for the pilot study. This study provides justification for a minimum requirement of a sample size of 30 respondents specifically to test the reliability of a questionnaire.

• The Korean Journal of Pain
• /
• v.26 no.3
• /
• pp.270-276
• /
• 2013

Background: Ketamine, an N-methyl-D-aspartate receptor antagonist, might play a role in postoperative analgesia, but its effect on postoperative pain after caesarean section varies with study design. We investigated whether the preemptive administration of low-dose intravenous ketamine decreases postoperative opioid requirement and postoperative pain in parturients receiving intravenous fentanyl with patient-controlled analgesia (PCA) following caesarean section. Methods: Spinal anesthesia was performed in 40 parturients scheduled for elective caesarean section. Patients in the ketamine group received a 0.5 mg/kg ketamine bolus intravenously followed by 0.25 mg/kg/h continuous infusion during the operation. The control group received the same volume of normal saline. Immediately after surgery, the patients were connected to a PCA device set to deliver 25-${\mu}g$ fentanyl as an intravenous bolus with a 15-min lockout interval and no continuous dose. Postoperative pain was assessed using the cumulative dose of fentanyl and visual analog scale (VAS) scores at 2, 6, 24, and 48 h postoperatively. Results: Significantly less fentanyl was used in the ketamine group 2 h after surgery (P = 0.033), but the difference was not significant at 6, 12, and 24 h postoperatively. No significant differences were observed between the VAS scores of the two groups at 2, 6, 12, and 24 h postoperatively. Conclusions: Intraoperative low-dose ketamine did not have a preemptive analgesic effect and was not effective as an adjuvant to decrease opioid requirement or postoperative pain score in parturients receiving intravenous PCA with fentanyl after caesarean section.

• International Journal of High-Rise Buildings
• /
• v.12 no.3
• /
• pp.251-262
• /
• 2023

In response to China's "Regulations on the Management of Earthquake Resistance of Building Constructions" on the provision of eight types of important buildings to maintain functional after fortified earthquakes occur, "Guidelines for Seismic Design of post-quake functional buildings (Draft for Review)" distinguishes Class I and Class II buildings, and gives the performance objectives and seismic verification requirements for design earthquakes and severe earthquakes respectively. In this paper, a hospital and a school building are selected as examples to design according to the requirements of fortification of Intensity 8 and 7 respectively. Two design strategies, the seismic isolation scheme and energy dissipation scheme, are considered which are evaluated through elastic-plastic dynamic time-history analysis to meet the requirement of post-quake functional buildings. The results show that the seismic isolation design can meet the requirements in the above cases, and the energy dissipation scheme is difficult to meet the requirements of the "Guidelines" on floor acceleration in some cases, for which the scheme shall be made valid through the seismic resilience assessment. The research in this paper can provide a reference for designers to choose schemes for post-quake functional buildings.

• Journal of Technologic Dentistry
• /
• v.30 no.2
• /
• pp.57-63
• /
• 2008

Statement of problem: Conventional techniques for implant framework fabrication produce significant error that is inconsistent with passive-fit requirement for osseointegrated implants. One of the etiologic factors which cause the errors is a sprue which may deform the framework during solidification and contraction. Purpose: This study was aimed to evaluate objectively effect of the sprue design on the accuracy of fit of implant prosthesis. Materials and method: Three different designs were considered relative to effect of casting accuracy. The first design had straight sprues and a button of excess alloy at the non-casting end of the sprues. The second was runner bar design(with the button). The last was straight sprues design(without the button). Gold cylinder and laboratory analogue had been used to diminish variables affecting to casting accuracy. Gold alloy and pressure-vacuum casting machine had been used. Marginal gap had been measured by SEM. One-way ANOVA and Duncan test had been used for statistical analysis. Results: The first design showed $79.87{\pm}13.95{\mu}m$ marginal gap. The second and third were $40.17{\pm}15.8{\mu}m$ and $35.17{\pm}9.95{\mu}m$ respectively. Conclusion: Straight sprues without button and runner bar designs were more accurate than straight sprues with button design(P<.05).

• Smart Media Journal
• /
• v.12 no.9
• /
• pp.72-80
• /
• 2023

This paper presents a design and analyzes the performance of a hospital assignment and reassignment scheme for emergency rescue services based on minimum cost maximum flow algorithm. It consists of flow graph building, link capacity updating, and allocation discovering steps. The efficiency of the algorithm makes it possible to reallocate hospitals even in case of dynamic changes in the number of patients or hospitals. The performance measurement result obtained from a prototype implementation shows that the proposed scheme can reduce the transport time requirement miss by up to 24%.

• Nuclear Engineering and Technology
• /
• v.55 no.6
• /
• pp.2335-2347
• /
• 2023

As medical facilities are usually built at urban areas, special concrete aggregates and evaluation methods are needed to optimize the design of concrete walls by balancing density, thickness, material composition, cost, and other factors. Carbon treatment rooms require a high radiation shielding requirement, as the neutron yield from carbon therapy is much higher than the neutron yield of protons. In this case study, the maximum carbon energy is 430 MeV/u and the maximum current is 0.27 nA from a hybrid particle therapy system. Hospital or facility construction should consider this requirement to design a special heavy concrete. In this work, magnetite is adopted as the major aggregate. Density is determined mainly by the major aggregate content of magnetite, and a heavy concrete test block was constructed for structural tests. The compressive strength is 35.7 MPa. The density ranges from 3.65 g/cm³ to 4.14 g/cm³, and the iron mass content ranges from 53.78% to 60.38% from the 12 cored sample measurements. It was found that there is a linear relationship between density and iron content, and mixing impurities should be the major reason leading to the nonuniform element and density distribution. The effect of this nonuniformity on radiation shielding properties for a carbon treatment room is investigated by three groups of Monte Carlo simulations. Higher density dominates to reduce shielding thickness. However, a higher content of high-Z elements will weaken the shielding strength, especially at a lower dose rate threshold and vice versa. The weakened side effect of a high iron content on the shielding property is obvious at 2.5 µSv=h. Therefore, we should not blindly pursue high Z content in engineering. If the thickness is constrained to 2 m, then the density can be reduced to 3.3 g/cm³, which will save cost by reducing the magnetite composition with 50.44% iron content. If a higher density of 3.9 g/cm³ with 57.65% iron content is selected for construction, then the thickness of the wall can be reduced to 174.2 cm, which will save space for equipment installation.