• Horticultural Science & Technology
• /
• v.29 no.3
• /
• pp.260-266
• /
• 2011

An efficient protocol was established for high frequency somatic embryogenesis through a callus culture of Coelogyne cristata. The best frequency of callusing was obtained from a PLB segment (3-5 mm) cultured on MS medium supplemented with coconut water (CW) and a combination of both 3 $mg{\cdot}L^{-1}$ of 2,4-D and BA. When the calli were sub-cultured on the MS medium without any PGRs, the average number of somatic embryos were higher than those with PGRs treatment. NAA is the most critical factor among PGRs, which dramatically hindered for the formation of a somatic embryo. The efficacy of the addition of coconut powder (CP) for somatic embryogenesis was almost the same in all treatments. However, the number of somatic embryos formed distinctly depended on age of the callus. The somatic embryos converted into healthy plants with well-developed shoots on the same medium. Plantlets showed the best responses of root and shoot growth when transferred to $\frac{1}{2}$ MS medium containing 1.5 $g{\cdot}L^{-1}$ of activated charcoal. All plants with above 3.0-cm-high were successfully acclimatized in the greenhouse.

• Journal of Bio-Environment Control
• /
• v.25 no.1
• /
• pp.30-41
• /
• 2016

Korean government has planned to increase the productivity of horticultural crops and to expand supply smart greenhouse for energy saving by modernization of horticultural facilities based on ICT in policy. However, the diversity and linkages of monitoring and control are significantly insufficient in the agricultural sector in the current situation. Therefore, development of a service system with smart-farm based on the internet of things(IoT) for intelligent systemization of all the process of agricultural production through remote control using complex algorithm for diverse monitoring and control is required. In this study, domestic and international research trend related to ICT-based horticultural facilities was briefly introduced and limits were analyzed in the domestic application of the advanced technology. Finally, future core technologies feasible to graft in agricultural field were reviewed.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.57 no.5
• /
• pp.37-42
• /
• 2015

In order to provide fundamental data for the creation of environmental design criteria for horticultural facilities, we developed a method to easily calculate the seasonal heating load applying heating degree-hour while taking into account heating load reductions due to solar radiation in the daytime, and reviewed through greenhouse heating experiments. Heating experiments and measuring meteorological environments were carried out in three greenhouses located at Buyeo, Cheonan, and Buan, and we derived reduction factors of seasonal heating load according to hours of sunshine. Daily mean hours of sunshine during the experiment period in each of the greenhouse was 4.0 to 8.3 hours, and the reduction factor of seasonal heating load was 0.64 to 0.85, has been shown to decrease linearly with the increase in hours of sunshine. A method to estimate the seasonal heating load for greenhouses was developed using the reduction factor of seasonal heating load derived from the greenhouse heating experiment, including the adjustment factor of seasonal heating load according to hours of sunshine. The developed method was validated through heating experiments in a greenhouse located at Cheonan. Greenhouse seasonal heating loads calculated by the method developed in this study were analyzed to show the estimate error of 1.2 to 5.0%. It showed that the accuracy increased 2.3 times more than when using the heating load reduction factor of 0.75 applied uniformly in previous studies. Thus, the calculation method of seasonal heating load for greenhouses considering hours of sunshine developed in this study could be utilized for energy estimation, management planning, and economic evaluation in greenhouse design.

• FLOWER RESEARCH JOURNAL
• /
• v.18 no.4
• /
• pp.291-294
• /
• 2010

A new grafted cactus cultivar, G. mihanovichii 'Hwangun', for exporting abroad, was developed by crossing G. mihanovichii 'Hwangwol' variety with yellow and orange color, and G. mihanovichii '0111021' line with yellow color in 2008. It grew for 6 months after grafting in vitro and culturing at 100 mL test tube. After grafting and planting in greenhouse in 2005, various characteristics were evaluated three times until 2008. It has flat-round shape and bright yellow skin. In addition, it has 7 to 9 ribs and brown straight spines on the body. The diameter of it was 40.9 mm after 10 months after planting, and small comparing with G. mihanovichii 'Hukwang' cultivar. The ability of propagation in G. mihanovichii 'Hwangun' is prior to that of G. mihanovichii 'Hukwang' producing approximately 22.3 daughter globes for 10 months.

• Journal of Bio-Environment Control
• /
• v.17 no.2
• /
• pp.90-95
• /
• 2008

It has become a big matter of concerns that the skill and measures against reduction of energy and cost for heating a protected horticultural greenhouse were prepared. But in these days necessity of cooling a protected horticultural greenhouse is on the rise from partial high value added farm products. In this study, therefore, a horizontal type geothermal heat pump system with 10 RT scale to heat and cool a protected horticultural greenhouse and be considered to be cheaper than a vertical type geothermal heat pump system was installed in greenhouse with area of $240\;m^2$. And cooling performances of this system were analysed. As condenser outlet temperature of heat transfer medium fluid rose from $40^{\circ}C$ to $58^{\circ}C$, power consumption of the heat pump was an upturn from 11.5 kW to 15 kW and high pressure rose from 1,617 kPa to 2,450 kPa. Cooling COP had the trend that the higher the ground temperature at 1.75 m went, the lower the COP went. The COP was 2.7 at ground temperature at 1.75 m depth of $25.5^{\circ}C$ and 2.0 at the temperature of $33.5^{\circ}C$ and the heat extraction rate from the greenhouse were 28.8 kW, 26.5 kW respectively at the same ground temperature range. 8 hours after the heat pump was operated, the temperature of ground at 60 cm and 150 cm depth buried a geothermal heat exchanger rose $14.3^{\circ}C$, $15.3^{\circ}C$ respectively, but the temperature of ground at the same depth not buried rose $2.4^{\circ}C$, $4.3^{\circ}C$ respectively. The temperature of heat transfer medium fluid fell $7.5^{\circ}C$ after the fluid passed through geothermal heat exchanger and the fluid rejected average 46 kW to the 1.5 m depth ground. It analyzed the geothermal heat exchanger rejected average 36.8 W/m of the geothermal heat exchanger. Fan coil units in the greenhouse extracted average 28.2 kW from the greenhouse air and the temperature of heat transfer medium fluid rose $4.2^{\circ}C$after the fluid passing through fan coil units. It was analyzed the accumulation energy of thermal storage thank was 321 MJ in 3 hours and the rejection energy of the tank was 313 MJ in 4 hours.

• Journal of Biosystems Engineering
• /
• v.38 no.4
• /
• pp.287-294
• /
• 2013

Purpose: Greenhouses for a protected horticulture covered with a plastic or glass are easy to have weakness in a heat loss by deterioration, damage, poor construction, and so on. To grasp the vulnerable points of heat loss of the greenhouses is important for heating energy saving. In this study, an on-site heat loss audit and energy consulting system were developed for an efficient energy usage of a greenhouse. Method: Developed system was mounted with infrared thermal and visual cameras to grasp the heat loss from the greenhouse quickly and exactly, and a trial calculation program of heating load of greenhouse to provide farmers with the information of heating energy usage. Results: Developed system could print out the reports about the locations and causes of the heat losses and improvement methods made up by an operator. The mounted trial calculation program could print out the information of the period heating load and fuel cost according to the conditions of greenhouse and cultivation. The program also mounted the databases of the information on the 13 horticultural energy saving technologies developed by the Korea Rural Development Administration and simple economic analysis sub-program to predict the payback period of the technologies. Conclusion: The developed system was expected to be used as the basic equipment for an instructors of district Agricultural Technology and Extension Centers to conduct the energy consulting service for the farmers within the jurisdiction.

• Journal of Ginseng Research
• /
• v.39 no.4
• /
• pp.345-353
• /
• 2015

Background: Ginseng is a semishade perennial plant cultivated in sloping, sun-shaded areas in Korea. Recently, owing to air-environmental stress and various fungal diseases, greenhouse cultivation has been suggested as an alternative. However, the optimal light transmission rate (LTR) in the greenhouse has not been established. Methods: The effect of LTR on photosynthesis rate, growth, and ginsenoside content of ginseng was examined by growing ginseng at the greenhouse under 6%, 9%, 13%, and 17% of LTR. Results: The light-saturated net photosynthesis rate ($A_{sat}$) and stomatal conductance ($g_{s}$) of ginseng increased until the LTR reached 17% in the early stage of growth, whereas they dropped sharply owing to excessive leaf chlorosis at 17% LTR during the hottest summer period in August. Overall, 6-17% of LTR had no effect on the aerial part of plant length or diameter, whereas 17% and 13% of LRT induced the largest leaf area and the highest root weight, respectively. The total ginsenoside content of the ginseng leaves increased as the LTR increased, and the overall content of protopanaxatriol line ginsenosides was higher than that of protopanaxadiol line ginsenosides. The ginsenoside content of the ginseng roots also increased as the LTR increased, and the total ginsenoside content of ginseng grown at 17% LTR increased by 49.7% and 68.3% more than the ginseng grown at 6% LTR in August and final harvest, respectively. Conclusion: These results indicate that 13-17% of LTR should be recommended for greenhouse cultivation of ginseng.

• Journal of Bio-Environment Control
• /
• v.23 no.4
• /
• pp.314-320
• /
• 2014

Three leaf vegetables, namely green lettuce, red lettuce (Lactuca sativa) and red-veined chicory (Cichorium intybus) were grown in minigreenhouses covered with two new functional films and conventional polyethylene film (PE). Seedlings of leaf vegetables were transplanted in a plastic troughs filled with soil-perlite mixture. Two functional films were made from polyolefin (PO) material. Measurement of optical characteristics showed that polyolefin films have better transmittance for the photosynthetic active radiation (PAR, 400-700nm) and higher absorptance for the ultraviolet radiation (UV, 300-400nm) in comparison with the conventional PE film. After three months of utilization higher loss in PAR transmittance was observed for conventional PE film. Leaf vegetables growth was enhanced and yield was increased in greenhouses covered by new functional films.

• Horticultural Science & Technology
• /
• v.34 no.1
• /
• pp.163-171
• /
• 2016

We investigated the intensity and pattern of the scent produced by diploid and tetraploid Cymbidium flowers, using an electronic nose with 6 metal oxide sensors (MOS). The MOS responses were evaluated by principal component analysis, discriminant function analysis, and sensor data. These analyses revealed that tetraploid flowers had a stronger scent than diploid flowers in Cymbidium Golden Elf 'Sundust'. Furthermore, among the different flower parts-column, lip, and petals-the column produced the strongest scent. There was no significant difference between the flowering periods of diploid and tetraploid potted Cymbidium Golden Elf 'Sundust' and Cymbidium Elma 'Orient Toyo' grown in a greenhouse. Moreover, there were no significant differences between the number of flowers per flower stem and the length of flower stems on the diploid and tetraploid plants of these two Cymbidium cultivars. This study provides potentially useful information for the breeding of polyploidy Cymbidium in the floriculture industry.

• Horticulture, Environment, and Biotechnology : HEB
• /
• v.59 no.6
• /
• pp.827-833
• /
• 2018

Plasma lighting systems have been engineered to simulate sunlight. The objective of this study was to determine the effects of plasma lighting on tomato plant growth, photosynthetic characteristics, flowering rate, and physiological disorders. Tomato plants were grown in growth chambers at air temperatures of $25/23^{\circ}C$ (light/dark period), in a $16h\;day^{-1}$ light period provided by four different light sources: 1 kW and 700 W sulfur plasma lights (1 SPL and 0.7 SPL), 1 kW indium bromide plasma light, and 700 W high pressure sodium lamp (0.7 HPS) as a control. The totaldry weight and leaf area at 0.7 SPL were approximately 1.2 and 1.3 times greater, respectively, than that of 0.7 HPS at the 62 days after sowing (DAS). The maximum light assimilation rate was observed at 1 SPL at the 73 DAS. In addition, the light compensation and saturation points of the plants treated with plasma lighting were 98.5% higher compared with HPS. Those differences appeared to be related to more efficient light interception, provided by the SPL spectrum. The percentage of flowering at 0.7 SPL was 30.5%, which was higher than that at 0.7 HPS; however, there were some instances of severe blossom end rot. Results indicate that plasma lighting promotes tomato growth, flowering, and photosynthesis. Therefore, a plasma lighting system may be a valuable supplemental light source in a greenhouse or plant factory.